journal article·2025-01Open access

A metallic lithium anode for solid-state batteries with low volume change by utilizing a modified porous carbon host

Stephanie Mörseburg, Tom Boenke, Kelly Henze, Konstantin Schutjajew, Jonas Kunigkeit, Sebastian Leonard Benz, Sahin Cangaz, Joachim Sann, Felix Hippauf, Susanne Dörfler, Thomas Abendroth, Holger Althues, Martin Oschatz, Eike Brunner, Jürgen Janek, Stefan Kaskel

Carbon· Volume 232

Abstract

Lithium metal is a promising negative electrode material for solid-state batteries (SSBs). However, uncontrolled lithium deposition and stripping cause several issues during cycling. Herein, the microporous carbon YP-50F and its modifications obtained by thermal ethene-based chemical vapor deposition (CVD) are investigated as 3D host to accommodate and control the deposition of metallic lithium. In half-cells vs. lithium, the CVD-YP composite electrode with Li 6 PS 5 Cl electrolyte shows significantly higher initial coulombic efficiency (79.5 %) than the pristine carbon (55.3 %) due to the reduction of side reactions. The metallic character of the deposited lithium is evidenced by 7 Li Nuclear Magnetic Resonance spectroscopy. However, full cells with nickel-rich NCM (LiNi 0.9 Co 0.05 Mn 0.05 O 2 ) positive electrode and CVD-YP composite negative electrode show reasonable performance over 50 cycles without occurrence of (micro-) short-circuits (in contrast to 2D reference electrodes). In addition, small prototype pouch cells are investigated and the thickness change during (dis)charging is less than one third compared to a bare lithium metal electrode. This demonstrates low breathing behavior of the CVD-YP electrode and confirms the reversible storage of metallic lithium within the 3D carbon-based composite electrode. • CVD-modification of activated carbon YP-50F leads to closed pores. • Improved electrochemical performance (e.g. ICE, overpotential) of CVD-coated carbon. • 7 Li NMR reveals storage of metallic lithium species within 3D carbon hosts. • 3D carbon framework suppresses (micro-)short-circuits at room temperature. • Only minor volume changes of 3D CVD-YP carbon based pouch cells over SoC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. High energy density all-solid-state batteries: a challenging concept towards 3D integration10.1002/adfm.200701245 ↗
2. Issues and challenges for bulk-type all-solid-state rechargeable lithium batteries using sulfide solid electrolytes10.1002/ijch.201400112 ↗
3. A solid future for battery development10.1038/nenergy.2016.141 ↗
4. Challenges, interface engineering, and processing strategies toward practical sulfide‐based all‐solid‐state lithium batteries10.1002/inf2.12292 ↗
5. Solid state lithium metal batteries – issues and challenges at the lithium-solid electrolyte interface10.1016/j.cossms.2022.100999 ↗
6. Nanomaterials for electrochemical energy storage10.1007/s11467-013-0408-7 ↗
7. Suppression of dendritic lithium growth in lithium metal-based batteries10.1039/C8CC02280A ↗
8. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
9. Temperature dependence of lithium anode voiding in argyrodite solid-state batteries10.1021/acsami.1c06706 ↗
10. Recent advances in energy chemistry between solid-state electrolyte and safe lithium-metal anodes10.1016/j.chempr.2018.12.002 ↗
11. Li metal anode interface in sulfide‐based all‐solid‐state Li batteries10.1002/eom2.12383 ↗
12. The stack pressure dilemma in sulfide electrolyte based Li metal solid‐state batteries: a case study with Li6PS5Cl solid electrolyte10.1002/admi.202100206 ↗
13. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes10.1038/s41560-018-0312-z ↗
14. Toward a fundamental understanding of the lithium metal anode in solid-state batteries-an electrochemo-mechanical study on the garnet-type solid electrolyte Li6.25Al0.25La3Zr2O1210.1021/acsami.9b02537 ↗
15. Review—practical challenges hindering the development of solid state Li ion batteries10.1149/2.1571707jes ↗
16. Effect of cell pressure on the electrochemical performance of all‐solid‐state lithium batteries with zero‐excess Li metal anode10.1111/jace.19322 ↗
17. High ionic conductivity lithium superionic halogen-rich argyrodite synthesized by liquid-phase technique10.1016/j.scriptamat.2023.115726 ↗
18. Chlorine-rich lithium argyrodite enables stable interfacial Li plating/stripping behavior in anode-free all-solid-state batteries10.1039/D3CE00560G ↗
19. Interfacial modification between argyrodite-type solid-state electrolytes and Li metal anodes using LiPON interlayers10.1039/D2EE01390H ↗
20. XPS and SEM analysis between Li/Li3PS4 interface with Au thin film for all-solid-state lithium batteries10.1016/j.ssi.2018.04.011 ↗
21. Dual protection of a Li-Ag alloy anode for all-solid-state lithium metal batteries with the argyrodite Li6PS5Cl solid electrolyte10.1021/acsami.2c09013 ↗
22. Epitaxial growth of nanostructured Li2 Se on lithium metal for all solid-state batteries10.1002/advs.202004204 ↗
23. The Indium−Lithium electrode in solid‐state lithium‐ion batteries: phase formation, redox potentials, and interface stability10.1002/batt.201800149 ↗
24. Lithium–magnesium alloy as a stable anode for lithium–sulfur battery10.1002/adfm.201808756 ↗
25. Carbon-free and binder-free Li-Al alloy anode enabling an all-solid-state Li-S battery with high energy and stability10.1126/sciadv.abn4372 ↗
26. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
27. Graphite-based lithium-free 3D hybrid anodes for high energy density all-solid-state batteries10.1021/acsenergylett.1c00627 ↗
28. Carbon materials for stable Li metal anodes: challenges, solutions, and outlook10.1002/cey2.147 ↗
29. Mechanistic insights into the reversible lithium storage in an open porous carbon via metal cluster formation in all solid-state batteries10.1016/j.carbon.2021.11.061 ↗
30. A review of composite lithium metal anode for practical applications
31. 3D vertically aligned Li metal anodes with ultrahigh cycling currents and capacities of 10 mA cm−2/20 mAh cm−2 realized by selective nucleation within microchannel walls10.1002/aenm.201903753 ↗
32. Stable nano‐encapsulation of lithium through seed‐free selective deposition for high‐performance Li battery anodes
33. Characteristics of graphite anode modified by CVD carbon coating10.1016/j.surfcoat.2005.05.040 ↗
34. A better understanding of the irreversible lithium insertion mechanisms in disordered carbons10.1016/j.jpcs.2003.10.050 ↗
35. Xu · 2010
36. Carbon deposition from benzene and cyclohexane onto active carbon fiber to control its pore size10.1021/la960292a ↗
37. Chemical vapor deposition of heterocyclic compounds over active carbon fiber to control its porosity and surface function10.1021/la961052y ↗
38. The modification of pore size in activated carbon fibers by chemical vapor deposition and its effects on molecular sieve selectivity10.1016/S0008-6223(97)00186-3 ↗
39. Modelling chemical vapour infiltration of pyrolytic carbon as moving boundary problem10.1016/j.ces.2008.04.053 ↗
40. Preparation of carbon molecular sieves, I. Two-step hydrocarbon deposition with a single hydrocarbon10.1016/0008-6223(93)90200-T ↗
41. Development of anion stereoselective, activated carbon molecular sieve electrodes prepared by chemical vapor deposition10.1021/jp811283b ↗
42. Reduction of the irreversible capacity of a graphite anode by the CVD process10.1016/S0008-6223(00)00267-0 ↗
43. The role of hydrogen in vapor deposition of diamond10.1063/1.343193 ↗
44. Towards optimized Li-ion storage performance: insight on the oxygen species evolution of hard carbon by H2 reduction10.1016/j.electacta.2020.135736 ↗
45. A new approach for the preparation of anodes for Li-ion batteries based on activated hard carbon cloth with pore design10.1016/S0378-7753(03)00119-8 ↗
46. Filling carbon: a microstructure-engineered hard carbon for efficient alkali metal ion storage10.1039/D3EE01154B ↗
47. Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach10.1016/j.ensm.2019.05.033 ↗
48. Nanostructured Si−C composites as high‐capacity anode material for all‐solid‐state lithium‐ion batteries10.1002/batt.202100055 ↗
49. Surface functionalization of LiNi7.0Co0.15Mn 0.15O 2 with fumed Li2ZrO3 via a cost‐effective dry‐coating process for enhanced performance in solid‐state batteries10.1002/batt.202200100 ↗
50. A rocking chair type all-solid-state lithium ion battery adopting Li2O–ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte10.1016/j.jpowsour.2013.10.005 ↗
51. Systematic and collaborative approach to problem solving using X-ray photoelectron spectroscopy10.1016/j.apsadv.2021.100112 ↗
52. The working principle of a Li 2 CO 3/LiNbO 3 coating on NCM for thiophosphate-based all-solid-state batteries10.1021/acs.chemmater.0c04660 ↗
53. Moulder · 1992
54. Structural analysis of sucrose-derived hard carbon and correlation with the electrochemical properties for lithium, sodium, and potassium insertion10.1021/acs.chemmater.9b05235 ↗
55. Chemical vapor deposition synthesis of carbon spheres: effects of temperature and hydrogen10.1016/j.vacuum.2019.109108 ↗
56. An in situ small-angle X-ray scattering study of sodium insertion into a nanoporous carbon anode material within an operating electrochemical cell10.1149/1.1394081 ↗
57. Mechanism of sodium storage in hard carbon: an X‐ray scattering analysis10.1002/aenm.201903176 ↗
58. Revealing the intercalation mechanisms of lithium, sodium, and potassium in hard carbon
59. Mechanisms for overcharging of carbon electrodes in lithium-ion/sodium-ion batteries analysed by operando solid-state NMR10.1039/D0TA04005C ↗
60. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
61. Hard carbon anodes for next‐generation Li‐ion batteries: review and perspective10.1002/aenm.202101650 ↗
62. Li-insertion in hard carbon anode materials for Li-ion batteries10.1016/S0013-4686(99)00198-X ↗
63. In situ 7Li-nuclear magnetic resonance observation of reversible lithium insertion into disordered carbons10.1149/1.1612011 ↗
64. Reduction of the irreversible capacity in hard‐carbon anode materials prepared from sucrose for Li‐ion batteries10.1149/1.1838585 ↗
65. Correlation of the irreversible lithium capacity with the active surface area of modified carbons10.1016/j.carbon.2005.03.041 ↗
66. Elucidating reversible electrochemical redox of Li6PS5Cl solid electrolyte10.1021/acsenergylett.9b01693 ↗
67. SEI growth on Lithium metal anodes in solid-state batteries quantified with coulometric titration time analysis10.1038/s41467-023-42512-y ↗
68. Interfacial reactivity and interphase growth of argyrodite solid electrolytes at lithium metal electrodes10.1016/j.ssi.2017.07.005 ↗
69. Origin of outstanding stability in the lithium solid electrolyte materials: insights from thermodynamic analyses based on first-principles calculations10.1021/acsami.5b07517 ↗
70. Interactions between electrolytes and carbon-based materials—NMR studies on electrical double-layer capacitors, lithium-ion batteries, and fuel cells10.1016/bs.arnmr.2015.08.003 ↗
71. In situ 7Li NMR during lithium electrochemical insertion into graphite and a carbon/carbon composite10.1016/j.jpcs.2006.01.088 ↗
72. The first in situ Li7 nuclear magnetic resonance study of lithium insertion in hard-carbon anode materials for Li-ion batteries10.1063/1.1556092 ↗
73. 7Li ‐nuclear magnetic resonance observation of lithium insertion into mesocarbon microbeads10.1149/1.1836926 ↗
74. 7Li ‐ NMR of well‐graphitized vapor‐grown carbon fibers and natural graphite negative electrodes of rechargeable lithium‐ion batteries10.1149/1.1392009 ↗
75. In situ NMR of lithium ion batteries: bulk susceptibility effects and practical considerations10.1016/j.ssnmr.2012.01.004 ↗
76. Current‐dependent lithium metal growth modes in “anode‐free” solid‐state batteries at the Cu|LLZO interface10.1002/aenm.202203174 ↗
77. Accelerated short circuiting in anode‐free solid‐state batteries driven by local lithium depletion10.1002/aenm.202204186 ↗
78. The influence of void space on ion transport in a composite cathode for all-solid-state batteries10.1016/j.jpowsour.2018.06.041 ↗
79. Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries10.1021/acsami.9b22788 ↗
80. Diffusion coefficient of lithium in artificial graphite, mesocarbon microbeads, and disordered carbon10.1016/S1872-5805(07)60006-7 ↗