journal article·2024-05Open access

Unravelling lithium distribution in carbon fibre electrodes for structural batteries with atom probe tomography

M. Johansen, M.P. Singh, J. Xu, L.E. Asp, B. Gault, F. Liu

Carbon· Volume 225

Abstract

Carbon fibres in structural batteries are multifunctional by acting both as structural reinforcement and as lithium (Li)-ion battery electrode. The relationship between the microstructure and mechanical capabilities of carbon fibres are well established, but much remains unexplored regarding their electrochemical properties. Specifically needed is a nanoscale understanding of how Li atoms distribute and interact in the carbon fibres. Atom probe tomography (APT) is uniquely positioned to provide subnanometre resolution in three dimensions. However, it has previously been hampered by undesirable Li migration during analysis. Here, we show that APT is successfully used to analyse electrochemically cycled polyacrylonitrile-based carbon fibres, through electrostatic shielding by means of conductive coating. We measure ∼1.5 at% Li in the carbon fibres after full delithiation, and thus identify trapped Li to constitute a substantial part of the initial capacity fade. After lithiation, Li accounts for ∼9 at% and according to frequency distribution analysis tend to agglomerate on the atomic scale. With nearest neighbour analysis, Li agglomeration is shown independent of heteroatom dopants such as nitrogen. Thus, the agglomeration is more likely induced by differing accessibility for Li in the crystalline and amorphous domains in the carbon fibre. The method used in this study can inform APT experiments on other type of Li-containing carbon electrodes. The findings of the study can be used to guide design of novel carbon fibres for structural batteries with enhanced electrochemical properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Materials Characterization Techniques · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Structural battery composites: a review10.1088/2631-6331/ab5571 ↗
2. A structural battery and its multifunctional performance
3. A multicell structural battery composite laminate10.1002/eom2.12180 ↗
4. Structural power composites10.1016/j.compscitech.2014.06.020 ↗
5. Model of a structural battery and its potential for system level mass savings
6. Advancing structural battery composites: robust manufacturing for enhanced and consistent multifunctional performance
7. Design of structural batteries: carbon fibers and alternative form factors
8. Carbon fiber reinforced structural lithium-ion battery composite: multifunctional power integration for CubeSats10.1016/j.ensm.2019.08.003 ↗
9. High precision coulometry of commercial PAN-based carbon fibers as electrodes in structural batteries10.1149/2.0041609jes ↗
10. Electrochemical characterization of lithium intercalation processes of PAN-based carbon fibers in a microelectrode system10.1149/2.054309jes ↗
11. PAN-based carbon fiber negative electrodes for structural lithium-ion batteries
12. Effect of tension during stabilization on carbon fiber multifunctionality for structural battery composites
13. Donnet · 1998
14. Park · 2018
15. Graphitic microstructure and performance of carbon fibre Li-ion structural battery electrodes
16. Lithium insertion in hard carbon as observed by 7Li NMR and XRD. The local and mesoscopic order and their relevance for lithium storage and diffusion10.1039/D2TA00078D ↗
17. Lithiated carbon fibres for structural batteries characterised with Auger electron spectroscopy
18. Auger- and X-ray photoelectron Spectroscopy in materials science, vol. 4910.1007/978-3-642-27381-0 ↗
19. Mapping nitrogen heteroatoms in carbon fibres using atom probe tomography and photoelectron spectroscopy10.1016/j.carbon.2021.03.061 ↗
20. Synthesis of nitrogen-doped graphene films for lithium battery application10.1021/nn101926g ↗
21. Nitrogen-doping of chemically reduced mesocarbon microbead oxide for the improved performance of lithium ion batteries10.1016/j.carbon.2011.11.007 ↗
22. One-pot hydrothermal synthesis of Nitrogen-doped graphene as high-performance anode materials for lithium ion batteries
23. Nitrogen-doped carbon materials10.1016/j.carbon.2018.02.024 ↗
24. Electrospun nitrogen-doped carbon nanofiber as negative electrode for vanadium redox flow battery10.1016/j.apsusc.2018.10.220 ↗
25. Atomistic origins of high rate capability and capacity of N-doped graphene for lithium storage10.1021/nl4038592 ↗
26. Correlation between atomic structure and electrochemical performance of anodes made from electrospun carbon nanofiber films10.1002/aenm.201301448 ↗
27. CNx nanotubes with pyridinelike structures: p-type semiconductors and Li storage materials10.1063/1.2975237 ↗
28. Connecting dopant bond type with electronic structure in n-doped graphene10.1021/nl301409h ↗
29. Chemical distribution and bonding of lithium in intercalated graphite: identification with optimized electron energy loss spectroscopy10.1021/nn1028168 ↗
30. Advanced electron energy loss spectroscopy for battery studies10.1002/adfm.202107190 ↗
31. Atom probe tomography10.1038/s43586-021-00047-w ↗
32. Best practices for analysis of carbon fibers by atom probe tomography10.1017/S1431927621012812 ↗
33. Effects of laser energy and wavelength on the analysis of LiFePO4 using laser assisted atom probe tomography10.1016/j.ultramic.2014.09.004 ↗
34. Atom probe tomography of lithium-doped network glasses10.1016/j.ultramic.2014.03.007 ↗
35. Atom probe analysis of electrode materials for Li-ion batteries: challenges and ways forward10.1039/D1TA10050E ↗
36. In situ atom probe deintercalation of lithium-manganese-oxide10.1017/S1431927616012691 ↗
37. A versatile and reproducible cryo-sample preparation methodology for atom probe studies10.1093/micmic/ozad120 ↗
38. Schwarz
39. Singh · 2023
40. Singh
41. Local electrode atom probe tomography of carbon fibre10.1017/S1431927619013217 ↗
42. Field ion image formation10.1016/0039-6028(78)90410-7 ↗
43. Challenges for lithium species identification in complementary Auger and X-ray photoelectron spectroscopy10.1016/j.jpowsour.2015.04.144 ↗
44. Application of Auger electron spectroscopy in lithium-ion conducting oxide solid electrolytes
45. Ga-induced delithiation of grain boundaries in a Li containing Al-based alloy
46. Isotopic abundances and atomic weights of the elements10.1063/1.555720 ↗
47. Quantitative binomial distribution analyses of nanoscale like-solute atom clustering and segregation in atom probe tomography data10.1002/jemt.20582 ↗
48. Graphite as anode materials: fundamental mechanism, recent progress and advances10.1016/j.ensm.2020.12.027 ↗
49. Kinetically determined phase transition from stage II (LiC12) to stage i (LiC6) in a graphite anode for Li-ion batteries10.1021/acs.jpclett.8b02750 ↗
50. Exploring the next neighbourhood relationship in amorphous alloys utilizing atom probe tomography10.1016/j.ultramic.2007.02.030 ↗
51. Mechanisms for lithium insertion in carbonaceous materials10.1126/science.270.5236.590 ↗
52. Structure-property relationships in carbon fibres10.1088/0022-3727/20/3/007 ↗
53. Fabrication and properties of carbon fibers10.3390/ma2042369 ↗