Interfacial wetting and reacting between pyrolytic graphite and Sn–Ag–Cu–Al alloy under ultrasonication at a low temperature
Source abstract
Abstract
Poor wetting and bonding serve as significant challenges in the joining of carbon materials at low temperatures. In this work, the ultrasonically assisted hot dipping of pyrolytic graphite was investigated in a SnAgCu–2Al liquid metal at a low temperature of 250 °C in air. During the ultrasonic-assisted hot-dipping process, the filler metal filled into the surface grooves of pyrolytic graphite. A closely contacting interface formed between the pyrolytic graphite and the filler metal . Interlayer penetration induced by the cavitation effect, and the amount and depth of penetration increased with ultrasonication time. A transition layer of Al 2 O 3 was formed at the interface between pyrolytic graphite and the filler metal. Large amounts of O atoms were induced at the interface during the ultrasonically assisted hot-dipping process, and the reaction of Al and O preferentially occurred between the liquid metal and solid C. This was consistent with the thermodynamic calculation results. The joining of metallizing-pyrolytic graphite was achieved by soldering at same temperature of 250 °C in air, where the highest joint strength could reach 17.52 MPa, achieving a joining module with a high thermal conductivity of 392 W/(m·K) and reaching 90 % of the base material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. A roadmap for graphene10.1038/nature11458 ↗
2. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
3. A review on advanced carbon-based thermal interface materials for electronic devices10.1016/j.carbon.2020.06.012 ↗
4. Efficient and inexpensive preparation of graphene laminated film with ultrahigh thermal conductivity10.1016/j.carbon.2020.09.039 ↗
5. Pyrolytic graphite film thermal straps: characterization testing10.1016/j.cryogenics.2016.10.002 ↗
6. Pyrolytic graphite heat sinks: a study of circuit board applications
7. Thermopower determination using pyrolytic graphite and aluminum thermocouple10.1016/j.sna.2019.111814 ↗
8. Wettability of molten aluminum-silicon alloys on graphite and surface tension of those alloys at 1273 K (1000 °C)10.1007/s11661-016-3460-4 ↗
9. Microstructural evolution of SiC joints soldered using Zn-Al filler metals with the assistance of ultrasound10.1016/j.ultsonch.2018.02.037 ↗
10. Viability study and mechanical characterisation of copper–graphite electrical contacts produced by adhesive joining10.1016/S0924-0136(03)00476-X ↗
11. Transient liquid phase bonding of graphite to Ti6Al4V alloy10.1080/13621718.2022.2095195 ↗
12. Highly-conductive, durability and flexible graphene-metal brazed strip and its heat-dissipation performance10.1016/j.ceramint.2023.02.244 ↗
13. Wettability and bonding of graphite by Sn0.3Ag0.7Cu-Ti alloys10.1016/j.carbon.2017.06.030 ↗
14. Microstructure and mechanical properties of single-crystal diamond/Kovar alloy joints brazed with an AgCuTi metal filler10.1016/j.diamond.2023.110246 ↗
15. Brazing of diamond to invar with Ag-Cu-Ti filler alloy: wettability, microstructure and mechanical performance10.1016/j.diamond.2024.111045 ↗
16. A review on filler materials for brazing of carbon-carbon composites10.1515/rams-2021-0007 ↗
17. Formation of TiC via interface reaction between diamond grits and Sn-Ti alloys at relatively low temperatures10.1016/j.ijrmhm.2017.04.005 ↗
18. Low temperature wetting mech-anisms of polycrystalline chemical vapour deposition (CVD) diamond by Sn-Ti solder alloys10.1016/j.matdes.2019.108039 ↗
19. Wetting behaviors and interfacial characteristics of Sn0.3Ag0.7Cu alloys containing Ti or Cr on graphite10.1007/s11661-018-4895-6 ↗
20. Wetting behaviours and interfacial characteristics of Co-binder sintered polycrystalline diamond by Sn Ti active solder, Powder
21. Wettability of SnAgCu–Cr alloys on graphite with different Cr contents10.1007/s10853-017-1979-4 ↗
22. Reactive wetting of binary Sn Cr alloy on polycrystalline chemical vapour deposited diamond at relatively low temperatures, Diam. Rela
23. Reactive wetting of Sn-V solder alloys on polycrystalline CVD diamond10.1016/j.apsusc.2019.144508 ↗
24. Reactive infiltration and microstructural characteristics of Sn-V active solder alloys on porous graphite
25. A novel metallization process for soldering graphite to copper at low temperature10.1016/j.jallcom.2016.12.104 ↗
26. Phase formation and reaction kinetics in the system Ti–Sn
27. The Cr−Sn (Chromium-Tin) system10.1007/BF02890556 ↗
28. The Sn−V (Tin-Vanadium) system10.1007/BF02881482 ↗
29. Microstructure evolution of SiC/SiC joints during ultrasonic-assisted air bonding using a Sn–Zn–Al alloy10.1016/j.ceramint.2017.07.169 ↗
30. Ultrasonic-assisted transient liquid phase bonding of SiC ceramic and aluminum alloy using an inactive Zn interlayer10.1016/j.matchar.2023.112902 ↗
31. Understanding the formation mechanism of SiC/Al joints by U-TLP bonding with the inactive Zn interlayer10.1016/j.jmst.2024.02.036 ↗
32. Building a nano-crystalline α-alumina layer at a liquid metal/sapphire interface by ultrasound10.1016/j.ultsonch.2014.05.008 ↗
33. Evolution of interfacial structures and mechanical performance of sapphire and Sn–9Zn–2Al joints by ultrasound10.1111/ijac.13324 ↗
34. Bonding and strengthening mechanism on ultrasonic-assisted soldering of sapphire using Sn-3.5Ag-4Al solder10.1016/j.jmatprotec.2020.116893 ↗
35. Ultrasonic-assisted soldering of sapphire through metallic transition layers of Al and Zn using Sn-xZn-2Al solder alloys10.1016/j.ceramint.2022.09.218 ↗
36. Rapid soldering of flexible graphene assembled films at low temperature in air with ultrasonic assistance10.1016/j.carbon.2019.11.089 ↗
37. Numerical simulation of non-dendritic structure formation in Mg-Al alloy solidified with ultrasonic field10.1016/j.ultsonch.2017.07.006 ↗
38. Nucleation and growth mechanisms of interfacial carbide in graphene nanosheet/Al composites10.1016/j.carbon.2020.01.032 ↗
39. Wetting and reaction promoted by ultrasound between sapphire and liquid Al-12Si alloy10.1016/j.ultsonch.2012.07.015 ↗
40. Microstructure evolution and mechanical properties of vacuum-brazed C/C composite with AgCuTi foil10.1016/j.msea.2012.11.057 ↗
41. Prediction of chemical stability in SiCp/Al composites with alloying element addition using Wilson equation and an extended Miedema model10.1016/j.msea.2004.11.040 ↗
42. The electronegativity parameter for transition metals: heat of formation and charge transfer in alloys10.1016/0022-5088(73)90078-7 ↗
43. Cohesion in alloys - fundamentals of a semi-empirical model10.1016/0378-4363(80)90054-6 ↗
44. Bond energy data summarized10.1021/ed072p423 ↗
45. Achieving Al melt-carbon and Al-Ti melts-carbon interfaces wetting via ultrasonic couple processing10.1007/s11661-013-1667-1 ↗
46. High-resolution electron microscopy of a SiC/SiC joint brazed by a Ag-Cu-Ti alloy10.1007/BF00551319 ↗
47. Novel ultrasonic soldering technique for lead-free solders10.2320/matertrans.45.703 ↗
48. Ultrasonic cavitation at solid surfaces10.1002/adma.201004494 ↗
49. Formation mechanism and mechanical performance of ultrasonic-assisted soldered joints of SiCp/2024Al composites at low temperature10.1007/s00170-022-10307-y ↗
50. Simulated thermal tests of a molybdenum/graphite X-ray target manufactured with a novel Ti-Zr-Nb-Be powder filler metal: an investigation of the brazed joint evolution under operating conditions10.1016/j.jmapro.2021.07.035 ↗
51. Joining of SiC ceramic to graphite using Ni–Cr–SiC powders as filler10.1016/j.msea.2008.01.082 ↗
52. Brazing graphite to hastelloy N superalloy using pure-Au filler metal: bonding mechanism and joint properties10.1016/j.matdes.2016.04.093 ↗
53. Brazing graphite to aluminum nitride for thermal dissipation purpose10.1002/adem.201600876 ↗
54. Effect of brazing temperature on microstructure and mechanical properties of graphite/copper joints10.1016/j.msea.2013.11.059 ↗
55. Brazing of graphite and stainless steel with Ag-Cu-Ti filler: effects of brazing process parameters on microstructure and mechanical properties
56. Graphite-to-304SS braze joining by active metal-brazing technique: improvement of mechanical properties10.1007/s11665-012-0225-0 ↗
57. Surface modification on wetting and vacuum brazing behavior of graphite using AgCu filler metal10.1016/j.surfcoat.2018.05.039 ↗
58. Preparation of the graphene nanosheets reinforced AgCuTi based composite for brazing graphite and Cu10.1016/j.jallcom.2018.11.407 ↗
59. Residual stress distribution as a function of depth in graphite/copper brazing joints via X-ray diffraction10.1016/j.jmst.2019.07.023 ↗
60. Brazing of graphite to 6063 aluminum alloy with Al-Cu-Si-Ni-Mg filler metal and Ag-Cu-Ti paste10.1007/s40194-021-01094-3 ↗
61. Interface reaction in ultrasonic vibration-assisted brazing of aluminum to graphite using Sn–Ag–Ti solder foil10.1016/j.jmatprotec.2015.02.028 ↗