journal article·2025-01

Pulsed plasma vapour deposition of carbon materials: Advantages and challenges

Carles Corbella, Asim Aijaz, Tomas Kubart, Li Lin, Sabine Portal, Michael Keidar

Carbon· Volume 232
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Lieberman · 2005
2. A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)10.1016/j.surfcoat.2014.08.043 ↗
3. The 2022 Plasma Roadmap: low temperature plasma science and technology10.1088/1361-6463/ac5e1c ↗
4. Gudmundsson J T, Anders A, von Keudell A. Foundations of physical vapor deposition with plasma assistance. 2022 Plasma Sources Sci. Technol. 31 083001,doi: https://doi.org/10.1088/1361-6595/ac7f53.10.1088/1361-6595/ac7f53 ↗
5. Diamond-like carbon coatings by arc-discharge methods10.1016/0257-8972(91)90280-A ↗
6. Metal plasma immersion ion implantation and deposition: a review10.1016/S0257-8972(97)00037-6 ↗
7. Modeling of atmospheric-pressure anodic carbon arc producing carbon nanotubes10.1063/1.3262626 ↗
8. Magnetron sputtering – milestones of 30 years10.1016/j.vacuum.2009.12.014 ↗
9. Preparation of amorphous diamond-like carbon by pulsed laser deposition: a critical review10.1016/0257-8972(95)02734-3 ↗
10. Wear mechanism of superhard tetrahedral amorphous carbon (ta-C) coatings for biomedical applications10.1002/admi.202202370 ↗
11. Control of reactive sputtering processes10.1016/j.tsf.2005.05.022 ↗
12. Corbella C, Sanchez O, Albella J M. Plasma-Enhanced Chemical Vapor Deposition of Thin Films in: 2021 Plasma Applications for Material Modification, Tabares F L (ed) (Singapore: Jenny Stanford Publishing) pp 17-54, doi: .https://doi.org/10.1201/9781003119203.10.1201/9781003119203-2 ↗
13. Keidar · 2018
14. Anders · 2008
15. Ion-beam deposition of thin films of diamondlike carbon10.1063/1.1660654 ↗
16. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
17. Tribology of diamond-like carbon films: recent progress and future prospects10.1088/0022-3727/39/18/R01 ↗
18. History of diamond-like carbon films – from first experiments to worldwide applications10.1016/j.surfcoat.2014.01.031 ↗
19. Tribological and electrical properties of metal-containing hydrogenated carbon films10.1063/1.97968 ↗
20. Preparation of metal (W, Mo, Nb, Ti) containing a-C:H films by reactive magnetron sputtering
21. Wetting behaviours of a-C:H:Si:O film coated nano-scale dual rough surface10.1016/j.cplett.2007.01.036 ↗
22. Rubio-Roy M, Bertran E, Pascual E, Polo M C, Andujar J L. Fluorinated DLC deposited by pulsed-DC plasma for antisticking surface applications. 2008 Diamond Relat Mater 17 1728-1732, doi: https://doi.org/10.1016/j.diamond.2007.12.008.10.1016/j.diamond.2007.12.008 ↗
23. Inactivation of bacteria and biomolecules by low-pressure plasma discharges10.1002/ppap.200900121 ↗
24. Compressive-stress-induced formation of thin-film tetrahedral amorphous carbon10.1103/PhysRevLett.67.773 ↗
25. Diamond-like carbon (DLC) coatings: classifications, properties, and applications10.3390/app11104445 ↗
26. Defect engineering of two-dimensional transition metal dichalcogenides10.1088/2053-1583/3/2/022002 ↗
27. Carbon nanotube- and graphene-based nanomaterials and applications in high-voltage supercapacitor: a review10.1016/j.carbon.2018.10.010 ↗
28. C60: buckminsterfullerene10.1038/318162a0 ↗
29. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
30. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
31. Arc discharge synthesis of carbon nanotubes: comprehensive review10.1016/j.diamond.2014.10.001 ↗
32. Synthesis of 2D materials in arc plasmas10.1088/0022-3727/48/31/314007 ↗
33. Acetylene: a key growth precursor for single-walled carbon nanotube forests10.1021/jp905134b ↗
34. Simple and engineered process yielding carbon nanotube arrays with 1.2×1013 cm-2 wall density on conductive underlayer at 400°C10.1016/j.carbon.2014.10.023 ↗
35. Carbon science perspective in 2024: current research and future challenges10.1016/j.carbon.2024.119488 ↗
36. Critical challenges and advances in the carbon nanotube-metal interface for next generation electronics10.1039/D0NA00822B ↗
37. Jeerapan · Challenges and Opportunities of Carbon Nanomaterials for Biofuel Cells and Supercapacitors: Personalized Energy for Futuristic Self-Sustainable Devices · 2019 · 5 · 62
38. Amorphous carbon films for electronic applications
39. Maher N, Mahmood A, Fareed M A, Kumar N, Rokaya D, Zafar M S. An updated review and recent advancements in carbon-based bioactive coatings for dental implant applications. 2024 (In press) J. Adv. Res. , doi: https://doi.org/10.1016/j.jare.2024.07.016.10.1016/j.jare.2024.07.016 ↗
40. DLC coatings in biomedical applications – review on current advantages, existing challenges, and future directions10.1016/j.surfcoat.2024.131006 ↗
41. Recent advances in carbon-based material/semiconductor composite photoelectrocatalysts: synthesis, improvement strategy, and organic pollutant removal10.1016/j.ccr.2023.215498 ↗
42. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
43. Numerical simulation of carbon arc discharge for nanoparticle synthesis10.1063/1.4737153 ↗
44. Vekselman V, Feurer M, Huang T, Stratton B, Raitses Y. Complex structure of the carbon arc discharge for synthesis of nanotubes. 2017 Plasma Sources Sci. Technol. 26 065019, doi: https://doi.org/10.1088/1361-6595/aa7158.10.1088/1361-6595/aa7158 ↗
45. Carbon nanotubes grown by asymmetric bipolar pulsed-DC PECVD10.1016/j.diamond.2006.11.076 ↗
46. Pulsed-plasma physical vapor deposition approach toward the facile synthesis of multilayer and monolayer graphene for anticoagulation applications10.1021/acsami.5b10952 ↗
47. Subplantation model for film growth from hyperthermal species10.1103/PhysRevB.41.10468 ↗
48. Growth mechanism and origin of high sp3 content in tetrahedral amorphous carbon10.1103/PhysRevLett.120.166101 ↗
49. Preparation of tetrahedral amorphous carbon films by filtered cathodic vacuum arc deposition10.1016/S0925-9635(99)00339-8 ↗
50. Recent progress of nanodiamond film in controllable fabrication and field emission properties10.3390/nano13030577 ↗
51. Growth and characterization of nanodiamond layers prepared using the plasma-enhanced linear antennas microwave CVD system10.1088/0022-3727/43/37/374018 ↗
52. He D, Zhao T, Liu Y, Zhu J, Yu G, Ge L. The effect of electric current on the synthesis of single-walled carbon nanotubes by temperature controlled arc discharge. 2007 Diamond Relat Mater 16 1722-1726, doi: https://doi.org/10.1016/j.diamond.2007.05.006.10.1016/j.diamond.2007.05.006 ↗
53. Formation of different arc-anode attachment modes and their effect on temperature fluctuation for carbon nanomaterial production in DC arc discharge10.1016/j.carbon.2017.02.084 ↗
54. Self-assembling of hot carbon nanoparticles observed by short pulse-arc-discharge10.1016/S0009-2614(01)00493-6 ↗
55. Vacuum arc deposited DLC based coatings
56. Corbella Roca · 2006
57. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
58. Petch N J. The cleavage strength of polycrystals. 1953 J Iron Steel Inst 174 25-28.
59. Self-consistent electrodynamics of large-area high-frequency capacitive plasma discharge
60. Upscaling plasma deposition: the influence of technological parameters10.1016/j.surfcoat.2013.12.002 ↗
61. Weichart J, Elghazzali M, Kadlec S, Ehiasarian A P. PVD processes in high aspect ratio features by HIPIMS, 201-206 in: 52nd SVC Annual Tech. Conf. Proc., Santa Clara, CA, May 9-14, 2009 © 2009 Society of Vacuum Coaters.
62. Luo H, Gao F, Billard A. Effect of auxiliary magnetic field on the conformal coverage of the microtrenches in high power impulse magnetron sputtering. 2020 J Mater Process Tech 283 116732, doi: https://doi.org/10.1016/j.jmatprotec.2020.116732.10.1016/j.jmatprotec.2020.116732 ↗
63. Fundamentals of pulsed plasmas for materials processing10.1016/j.surfcoat.2003.09.049 ↗
64. Bradley J W, Welzel T. Physics and phenomena in pulsed magnetrons: an overview. 2009 J. Phys. D Appl. Phys. 42 093001, doi: https://doi.org/10.1088/0022-3727/42/9/093001.10.1088/0022-3727/42/9/093001 ↗
65. Retarding field analyzer for ion energy distribution measurements at a radio-frequency biased electrode10.1063/1.2890100 ↗
66. Fundamental aspects of substrate biasing: ion velocity distributions and nonlinear effects10.1088/0022-3727/43/33/335201 ↗
67. Ion energy distributions in bipolar pulsed-dc discharges of methane measured at the biased cathode10.1088/0963-0252/20/1/015006 ↗
68. Glows, arcs, ohmic discharges: an electrode-centered review on discharge modes and the transitions between them10.1063/5.0205274 ↗
69. A novel pulsed magnetron sputter technique utilizing very high target power densities10.1016/S0257-8972(99)00292-3 ↗
70. DLC Films deposited by bipolar pulsed DC PACVD10.1016/S0925-9635(97)00236-7 ↗
71. Up-scaling the production of modified a-C:H coatings in the framework of plasma polymerization processes10.1016/j.solidstatesciences.2008.11.010 ↗
72. High power pulsed magnetron sputtering: a review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
73. HiPIMS obtained carbon nano-coatings on copper foil and their thermal conductivity10.1016/j.surfcoat.2022.128565 ↗
74. Boxman R L, Sanders D M, Martin P J (ed) 1995 Handbook Of Vacuum Arc Science And Technology (Park Ridge, NJ: Noyes Publications) .
75. Cathode spots of electric arcs10.1088/0022-3727/34/17/202 ↗
76. Corbella C, Portal S, Kundrapu M N, Keidar M. Anodic arc discharge: Why pulsed? 2020 Phys. Plasmas 27 054501, doi: https://doi.org/10.1063/5.0002872.10.1063/5.0002872 ↗
77. Corbella C, Portal S, Zolotukhin D B, Martinez L, Lin L, Kundrapu M N, et al. Pulsed anodic arc discharge for the synthesis of carbon nanomaterials. 2019 Plasma Sources Sci. Technol. 28 045016, doi: https://doi.org/10.1088/1361-6595/ab123c.10.1088/1361-6595/ab123c ↗
78. Asymmetric bipolar pulsed DC: the enabling technology for reactive PVD10.1016/S0257-8972(97)00403-9 ↗
79. Plasma parameters of pulsed-dc discharges in methane used to deposit diamondlike carbon films10.1063/1.3183945 ↗
80. Hydrogenated amorphous carbon thin films deposition by pulsed DC plasma enhanced by electrostatic confinement10.1016/j.surfcoat.2014.09.024 ↗
81. Pulsed DC plasma CVD system for the deposition of DLC films10.1016/j.mtcomm.2017.12.008 ↗
82. A review of plasma-assisted deposition methods for amorphous carbon thin and ultrathin films with a focus on the cathodic vacuum arc technique10.1557/s43578-022-00868-9 ↗
83. Lundin D, Minea T, Gudmundsson J T (eds) 2020 High Power Impulse Magnetron Sputtering (Cambridge: Elsevier), doi: https://doi.org/10.1016/C2016-0-02463-4.10.1016/B978-0-12-812454-3.00010-3 ↗
84. Exploring the potential of high power impulse magnetron sputtering for growth of diamond-like carbon films10.1016/j.surfcoat.2011.11.032 ↗
85. A strategy for increased carbon ionization in magnetron sputtering discharges10.1016/j.diamond.2011.12.043 ↗
86. Mechanical properties of hydrogen free diamond-like carbon thin films deposited by high power impulse magnetron sputtering with Ne10.3390/coatings8110385 ↗
87. Discharge runaway in high power impulse magnetron sputtering of carbon: the effect of gas pressure, composition and target peak voltage10.1088/1361-6463/aab590 ↗
88. The ‘recycling trap’: a generalized explanation of discharge runaway in high-power impulse magnetron sputtering10.1088/0022-3727/45/1/012003 ↗
89. Brenning N, Gudmundsson J T, Raadu M A, Petty T J, Minea T, Lundin D. A unified treatment of self-sputtering, process gas recycling, and runaway for high power impulse sputtering magnetrons. 2017 Plasma Sources Sci. Technol. 26 125003, doi: https://doi.org/10.1088/1361-6595/aa959b.10.1088/1361-6595/aa959b ↗
90. Mixed-mode high-power impulse magnetron sputter deposition of tetrahedral amorphous carbon with pulse-length control of ionization10.1063/1.4946841 ↗
91. Modeling of high power impulse magnetron sputtering discharges with graphite target10.1088/1361-6595/ac352c ↗
92. Fabrication of diamond-like carbon films using short-pulse HiPIMS10.1016/j.surfcoat.2015.12.010 ↗
93. Diamond like carbon films deposited by HiPIMS using oscillatory voltage pulses10.1016/j.surfcoat.2014.06.061 ↗
94. The influence of positive pulses on HiPIMS deposition of hard DLC coatings10.1016/j.surfcoat.2018.11.001 ↗
95. Structure of diamond-like carbon films containing transition metals deposited by reactive magnetron sputtering10.1016/j.diamond.2004.10.029 ↗
96. Growth of Ti-C nanocomposite films by reactive high power impulse magnetron sputtering under industrial conditions10.1016/j.surfcoat.2011.10.039 ↗
97. Influence of inert gases on the reactive high power pulsed magnetron sputtering process of carbon-nitride thin films10.1116/1.4769725 ↗
98. A comparative study of direct current magnetron sputtering and high power impulse magnetron sputtering processes for CNx thin film growth with different inert gases10.1016/j.diamond.2016.01.009 ↗
99. Current-voltage-time characteristics of the reactive Ar/N2 high power impulse magnetron sputtering discharge10.1063/1.3653233 ↗
100. Preparation and properties of highly tetrahedral hydrogenated amorphous carbon10.1103/PhysRevB.53.1594 ↗