journal article·2023-09Open access

New, 3D binder-jetted carbons with minimal periodic surface structures

Marco Pelanconi, Pauline Blyweert, Giovanni Bianchi, Vincent Nicolas, Davide Viganò, Samuele Bottacin, Vanessa Fierro, Alain Celzard, Alberto Ortona

Carbon· Volume 213

Abstract

This study focuses on the design, additive manufacturing, and characterization of porous carbon-based structures in the form of a triply periodic minimal surface (TPMS) with outstanding mechanical properties and oxidation resistance, combined with good electrical and thermal conductivity. Binder jetting (BJ) of graphite-carbon black powders was used to 3D print computational models of three TPMS with different topologies and geometric porosities. Infiltration and pyrolysis (PIP) with furan resin was then performed to densify the parts. Composite materials, comprising a highly disordered carbon matrix binding well-crystallized graphite grains, were obtained. The printed and pyrolyzed samples are highly porous TPMS cylinders with diameter, height and a surface thickness of ∼19 mm, ∼33 mm and 0.76 mm, respectively. The samples have a skeleton intrinsic porosity of 20%, of which 8% is open, meaning that the material could potentially be further infiltrated and densified. Nevertheless, the samples have better mechanical properties than compressed carbon-graphite composites, as well as 3D-printed carbon produced by direct ink writing and stereolithography. High-temperature tests showed that, although the amorphous carbon matrix is more prone to oxidation than the graphite grains, the overall oxidation resistance remains exceptionally high. These properties allow for applications as Joule resistors and in seasonal thermal storage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Graphene research and applications · Additive Manufacturing and 3D Printing Technologies · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. 3D printing of carbon-based materials : a review10.1016/j.carbon.2021.07.036 ↗
2. Progress in 3D printing of carbon materials for energy-related applications10.1002/adma.201603486 ↗
3. Chapter 10 - binder jetting
4. Binder jet printing in pharmaceutical manufacturing
5. The application and challenge of binder jet 3D printing technology in pharmaceutical manufacturing10.3390/pharmaceutics14122589 ↗
6. Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes10.1016/j.carbon.2017.04.028 ↗
7. Binder jet additive manufacturing of ceramic heat exchangers for concentrating solar power applications with thermal energy storage in molten chlorides
8. Development of a silicon carbide ceramic based counter-flow heat exchanger by binder jetting and liquid silicon infiltration for concentrating solar power10.1016/j.ceramint.2022.04.269 ↗
9. Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting10.1038/s41598-021-81861-w ↗
10. Saunders · 2018
11. Fabrication and characterization of Graphite/Nylon 12 composite via Binder Jetting additive manufacturing process
12. Fitzer · 1998
13. Sorption thermal energy storage: concept, process, applications and perspectives10.1016/j.ensm.2020.02.024 ↗
14. Enhancing water adsorption capacity of acorn nutshell based activated carbon for adsorption thermal energy storage application10.1016/j.egyr.2020.11.038 ↗
15. Seasonal thermal energy storage with aqueous sodium hydroxide – experimental methods for increasing the heat and mass transfer by improving surface wetting
16. Improvement of water/resin wettability of graphite using carbon black nano particles coating via ink media10.1016/j.jallcom.2009.04.019 ↗
17. Effect of nanoparticles in bimodal powder on physical and mechanical properties of powder injection molded parts10.1016/j.jmatprotec.2018.07.012 ↗
18. The relevance of powder/liquid wettability to the cohesiveness of carbon black agglomerates10.1002/ppsc.19860030106 ↗
19. Practical aspects for characterizing air oxidation of graphite10.1016/j.jnucmat.2008.07.020 ↗
20. Is the bet equation applicable to microporous adsorbents?
21. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
22. Carbon slit pore model incorporating surface energetical heterogeneity and geometrical corrugation10.1007/s10450-013-9517-4 ↗
23. Webb · 1997
24. Webb · 2001 · vol. 2
25. An assessment of powder pycnometry as a means of determining granule porosity10.3109/10837450.2013.860550 ↗
26. Characterization of carbonaceous materials by correlated electron and optical microscopy and Raman microspectroscopy
27. Characterization of diamond films by Raman spectroscopy10.1557/JMR.1989.0385 ↗
28. Raman spectroscopy of carbon materials: structural basis of observed spectra10.1021/cm00011a018 ↗
29. Raman microprobe studies on carbon materials10.1016/0008-6223(94)90148-1 ↗
30. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
31. General equation for the determination of the crystallite size La of nanographite by Raman spectroscopy10.1063/1.2196057 ↗
32. Interaction of 2D materials with liquids: wettability, electrochemical properties, friction, and emerging directions10.1038/s41427-020-0203-1 ↗
33. Effect of airborne contaminants on the wettability of supported graphene and graphite10.1038/nmat3709 ↗
34. High performance oxide functionalized nitrogen-doped mesocellular carbon foam for biosensor construction10.1002/elan.200804469 ↗
35. Superhydrophobic surfaces: a review on fundamentals, applications, and challenges10.1007/s11998-017-0011-x ↗
36. A critical review on surface modifications mitigating dairy fouling10.1111/1541-4337.12794 ↗
37. How to obtain a reliable structural characterization of polished graphitized carbons by Raman microspectroscopy10.1002/jrs.3014 ↗
38. Evidence of water chemisorption during graphite friction under moist conditions10.1016/j.carbon.2012.12.013 ↗
39. Uniaxial strength behavior of brittle cellular materials10.1111/j.1151-2916.1993.tb07753.x ↗
40. Mechanical properties of model vitreous carbon foams10.1016/j.carbon.2017.02.020 ↗
41. Mechanical properties and thermal conductivity of lightweight and high-strength carbon-graphite thermal insulation materials10.1007/s10853-021-06862-6 ↗
42. From whey robocasting to custom 3D porous carbons
43. Tannin-based resins for 3D printing of porous carbon architectures10.1021/acssuschemeng.2c01686 ↗
44. Experimental design optimisation of tannin-acrylate photocurable resins for 3D printing of biobased porous carbon architectures10.3390/molecules27072091 ↗
45. Effect of grain size on the thermal expansion of isotropic synthetic graphites10.1007/s10789-005-0302-y ↗
46. Hidnert · 1927 · 21
47. Htw Germany, (n.d.). http://www.htw-germany.com (accessed February 8, 2023).
48. Touloukian · 1977 · vol. 13
49. Effect of temperature on graphite oxidation behavior10.1016/j.nucengdes.2003.11.004 ↗
50. Determining the acute oxidation behavior of several nuclear graphite grades10.1016/j.jnucmat.2020.152648 ↗
51. Oxidation behavior of matrix graphite and its effect on compressive strength10.1155/2017/4275375 ↗
52. 3D-printed carbons with improved properties and oxidation resistance10.1021/acssuschemeng.3c00152 ↗
53. Electrical conductivity of carbonaceous powders10.1016/S0008-6223(02)00196-3 ↗
54. The electronic properties of graphite
55. Ashby · 2000
56. Electrical conductivity and porosity relationship in metal foams10.1007/s10934-008-9248-1 ↗
57. Electrical conductivity in inhomogeneous media10.1063/1.31150 ↗
58. Investigation of the current state of isostatic graphite production technology10.15587/2312-8372.2017.98125 ↗
59. Raman spectra and electrical conductivity of glassy carbon10.1016/0921-5107(92)90240-A ↗
60. Structure and electromagnetic properties of cellular glassy carbon monoliths with controlled cell size10.3390/ma11050709 ↗
61. Determination of the specific heat capacity of a graphite sample using absolute and differential methods10.1088/0026-1394/44/5/005 ↗
62. Letellier · 2015
63. 2011
64. Delhaes · 2012
65. La texture des carbones
66. Electrical conductivity and Joule heating of polyacrylonitrile/carbon nanotube composite fibers10.1016/j.polymer.2014.10.064 ↗
67. Hydrophobised carbon foams for improved long-term seasonal solar thermal energy storage10.1016/j.solmat.2020.110849 ↗
68. Design of carbon foams for seasonal solar thermal energy storage10.1016/j.carbon.2016.08.048 ↗
69. Gibson · 1997