High surface area microporous carbon nanocubes from controlled processing of graphene oxide nanoribbons
Source abstract
Abstract
A new, facile, and template-free method to prepare high surface area microporous carbon nanocubes (CNCs) from a mixture of graphene oxide nanoribbons (NRs), graphene oxide, and carbon dots is reported. The nanoribbons, approximately 30 nm wide and with lengths ranging from a few tens of nanometres up to several micrometres, were obtained from oxidation of Black Pearls 2000 carbon black in nitric acid solution. The non-purified nanoribbons further contained additional fragments of graphene oxide, and of graphene oxide quantum dots. Slow pyrolysis of the nanoribbon mixture with slow heating rates, e.g., 3 °C/min, yielded carbon nanocubes approximately 250 nm in size with surface areas greater than 900 m2/g. Heating rates of 50 °C/min led to carbons with ∼800 m2/g surface area but bulk morphology. Precipitating the nanoribbons in potassium hydroxide solution, followed by carbonization, yielded microporous nanoparticle aggregates that were 20 nm in size with surface areas greater than 2000 m2/g. The particles exhibited complex, quasi-spherical morphology. Pyrolysis of other products obtained from oxidation in HNO3 of different grades of carbon black, specifically graphene oxide nanoparticles and quantum dots, yielded high surface area microporous carbons but with bulk morphology regardless of the processing conditions. Despite the lower surface area and pore volume of the CNCs in comparison to the nanospheres, the former contained ultramicropores that were highly accessible to CO2 as a molecular probe and had excellent selectivity of CO2 over N2. Hence, CNC materials have promising properties for applications where particle surface to volume ratios, high internal surface areas, and abundant super and ultramicropores are desired.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Graphene research and applications · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Synthesis and application of granular activated carbon from biomass waste materials for water treatment: a review10.1016/j.jobab.2021.03.003 ↗
2. Utilization of waste straw and husks from rice production: a review
3. Effect of carbon particle size on electrochemical performance of EDLC10.1149/1.2918304 ↗
4. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
5. Diffusion in liquid‐filled pores of activated carbon. I. Pore volume diffusion10.1002/cjce.5450720213 ↗
6. Molecular-based design and emerging applications of nanoporous carbon spheres10.1038/nmat4317 ↗
7. Chitin derived nitrogen-doped porous carbons with ultrahigh specific surface area and tailored hierarchical porosity for high performance supercapacitors10.1016/j.jobab.2021.02.002 ↗
8. Review on porous carbon materials engineered by ZnO templates: design, synthesis and capacitance performance10.1016/j.matdes.2021.109518 ↗
9. Recent advances in carbon substrate supported nonprecious nanoarrays for electrocatalytic oxygen evolution10.1039/D1TA08039C ↗
10. Synthesis of a novel mesoporous carbon Nanocube@Mesoporous Silica@Poly(acrylic acid) composite and application as potential drug carriers10.1134/S003602441907029X ↗
11. Micro- and nanocubes of carbon with C8-like and blue luminescence10.1021/nl801392v ↗
12. Metal organic framework-derived Fe/C nanocubes toward efficient microwave absorption10.1039/C5TA01457C ↗
13. Facile synthesis of carbon nanocubes and its applications for sensing antibiotics10.1016/j.jphotochem.2020.112855 ↗
14. High-performance counter electrode of carbon nanocubes with embedded cobalt-iron alloy nanoparticles for dye-sensitized solar cells10.1016/j.electacta.2018.05.089 ↗
15. ZnSe embedded in N-doped carbon nanocubes as anode materials for high-performance Li-ion batteries10.1016/j.cej.2019.01.191 ↗
16. In-situ constructing Na3V2(PO4)2F3/carbon nanocubes for fast ion diffusion with high-performance Na+-storage10.1016/j.cej.2019.123952 ↗
17. Multi-chambered micro/mesoporous carbon nanocubes as new polysulfides reserviors for lithium-sulfur batteries with long cycle life10.1016/j.nanoen.2015.05.034 ↗
18. (Fe,Co)@nitrogen-doped graphitic carbon nanocubes derived from polydopamine-encapsulated metal–organic frameworks as a highly stable and selective non-precious oxygen reduction electrocatalyst10.1039/C5CC03946K ↗
19. Cubic-shaped WS2 nanopetals on a Prussian blue derived nitrogen-doped carbon nanoporous framework for high performance sodium-ion batteries10.1039/C7TA01821E ↗
20. A high-throughput composite catalyst based on nickel carbon cubes for the hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran10.1002/cctc.201700506 ↗
21. “Cubism” on the nanoscale: from squaric acid to porous carbon cubes10.1002/smll.201600284 ↗
22. Double -shelled hollow ZnO/carbon nanocubes as an efficient solid-phase microextraction coating for the extraction of broad-spectrum pollutants10.1039/C8NR09180C ↗
23. Exotic carbon nanostructures obtained through controllable defect engineering10.1039/C5RA04831A ↗
24. Oxidative synthesis of yellow photoluminescent carbon nanoribbons from carbon black10.1016/j.carbon.2021.07.032 ↗
25. Is the bet equation applicable to microporous adsorbents?10.1016/S0167-2991(07)80008-5 ↗
26. Gas adsorption characterization of ordered organic-inorganic nanocomposite materials10.1021/cm0101069 ↗
27. Oxidative degradation of carbon blacks with nitric acid (I)—changes in pore and crystallographic structures10.1016/S0008-6223(97)00227-3 ↗
28. Surface modification and characterization of carbon black through oxidation10.1002/sia.6581 ↗
29. Nanostructure quantification of carbon blacks
30. The rise of graphene10.1038/nmat1849 ↗
31. Graphene nanoengineering and the inverse Stone-Thrower-Wales defect10.1103/PhysRevB.81.155444 ↗
32. Theoretical studies of icosahedral C60 and some related species10.1016/0009-2614(86)80661-3 ↗
33. Carbon black reborn: structure and chemistry for renewable energy harnessing10.1016/j.carbon.2020.02.058 ↗
34. Topological defects: origin of nanopores and enhanced adsorption performance in nanoporous carbon10.1002/smll.201200894 ↗
35. Facile and environmentally friendly synthesis of ultramicroporous carbon spheres: a significant improvement in CVD method10.1016/j.carbon.2020.08.056 ↗
36. Interplay between oxygen doping and ultra-microporosity improves the CO2/N2 separation performance of carbons derived from aromatic polycarboxylates10.1016/j.carbon.2020.11.080 ↗
37. Understanding chemical reactions between carbons and NaOH and KOH: an insight into the chemical activation mechanism10.1016/S0008-6223(02)00279-8 ↗
38. X-ray diffraction patterns of graphite and turbostratic carbon10.1016/j.carbon.2007.03.038 ↗
39. Study of copper(II) oxide and copper(II) acetate on multiwalled carbon nanotubes by XPS10.1116/1.5091615 ↗
40. Chemical states of electrochemically doped single wall carbon nanotubes as probed by Raman spectroelectrochemistry and ex situ X-ray photoelectron spectroscopy10.1021/jp803514h ↗
41. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
42. Carbon materials for chemical capacitive energy storage10.1002/adma.201100984 ↗
43. Advanced materials for energy storage10.1002/adma.200903328 ↗
44. A review on application of activated carbons for carbon dioxide capture: present performance, preparation, and surface modification for further improvement10.1007/s11356-021-15121-9 ↗
45. Biomass derived porous carbon for CO2 capture10.1016/j.carbon.2019.03.050 ↗
46. Power plant post-combustion carbon dioxide capture: an opportunity for membranes10.1016/j.memsci.2009.10.041 ↗
47. Assessment of the role of micropore size and N-doping in CO2 capture by porous carbons10.1021/am401423b ↗
48. Importance of small micropores in CO2 capture by phenolic resin-based activated carbon spheres10.1039/C2TA00388K ↗
49. Highly microporous activated carbons from biomass for CO2 capture and effective micropores at different conditions10.1016/j.jcou.2017.01.006 ↗
50. Novel porous carbons derived from coal tar rejects: assessment of the role of pore texture in CO2 capture under realistic postcombustion operating temperatures10.1021/acsami.9b13247 ↗
51. Predicting multicomponent adsorption: 50 years of the ideal adsorbed solution theory10.1002/aic.14878 ↗
52. Role of oxygen, nitrogen and sulfur functionalities on the surface of nanoporous carbons in CO2 adsorption: a critical review10.1016/j.micromeso.2019.05.051 ↗
53. Nitrogen enriched porous carbon spheres: attractive materials for supercapacitor electrodes and CO2 adsorption10.1021/cm5001895 ↗
54. Pore structure regulation and carbon dioxide adsorption capacity improvement on porous BN fibers: effects of high-temperature treatments in gaseous ambient10.1016/j.cej.2019.05.081 ↗
55. Holey graphene frameworks for highly selective post-combustion carbon capture10.1038/srep21537 ↗
56. Effect of chemical activators on polyphosphazene-based hierarchical porous carbons and their good CO2 capture10.1016/j.diamond.2022.108966 ↗
57. Enhanced N-doped porous carbon derived from KOH-activated waste wool: a promising material for selective adsorption of CO2/CH4 and CH4/N210.3390/nano9020266 ↗
58. In-situ pyrolysis of Taihu blue algae biomass as appealing porous carbon adsorbent for CO2 capture: role of the intrinsic N10.1016/j.scitotenv.2021.145424 ↗
59. Porous carbons derived from sustainable biomass via a facile one-step synthesis strategy as efficient CO2 adsorbents10.1021/acs.iecr.0c00073 ↗
60. Transformation of waste cornstalk into versatile porous carbon adsorbent for selective CO2 capture and efficient methanol adsorption10.1016/j.jece.2021.106149 ↗
61. A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: as a promising adsorbent for CO2 capture10.1016/j.jece.2021.105165 ↗
62. Utilization of waste aquatic weeds for the sustainable production of nitrogen doped nanoporous carbon for CO2 capture
63. Oxygen functionalized porous activated biocarbons with high surface area derived from grape marc for enhanced capture of CO2 at elevated-pressure10.1016/j.carbon.2020.01.008 ↗
64. Evaluation of different potassium salts as activators for hierarchically porous carbons and their applications in CO2 adsorption10.1016/j.jcis.2020.09.022 ↗
65. Charge transport in strongly coupled quantum dot solids10.1038/nnano.2015.247 ↗
66. Interplay between spherical confinement and particle shape on the self-assembly of rounded cubes10.1038/s41467-018-04644-4 ↗
67. Pt nanoparticles supported on nitrogen-doped porous carbon nanospheres as an electrocatalyst for fuel cells10.1021/cm901542w ↗
68. Engineering porous materials for fuel cell applications