Fabrication of inversion channel diamond MOSFET with atomically step-free Al2O3/diamond interface
Source abstract
Abstract
Diamond is a wide bandgap semiconductor and is expected to be applied to power and high-frequency devices due to its high physical properties. In 2016, we reported the first inversion channel diamond MOSFET with normally-off operation and field-effect mobility ( μ FE ) of 8 cm 2 /Vs and then have developed the diamond MOSFET-related technologies. However, the μ FE of the inversion channel diamond MOSFET is 20 cm 2 /Vs, which is still lower than the ideal channel mobility of 3000 cm 2 /Vs. One of the main reasons for the low mobility is the high interface state density ( D it ) of 10 13 cm −2 eV −1 or more generated by the bunching step on the diamond surface. In this study, in order to reduce D it and improve μ FE , we propose the fabrication process of an inversion channel p-type diamond MOSFET with atomically step-free Al 2 O 3 /diamond (111) interface and demonstrate the step-free interface diamond MOSFET. The step-free diamond MOSFET showed normally-off, gate voltage control, and clear saturation characteristics. The μ FE and D it of the step-free diamond MOSFET were 30.6 cm 2 /Vs and 2.8 × 10 12 cm −2 eV −1 , respectively. The D it values are the lowest among the inversion channel diamond MOSFET reported to date for inversion channel MOSFET using an Al 2 O 3 /diamond interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Semiconductor materials and devices · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Time-resolved cyclotron resonance on dislocation-free HPHT diamond10.1016/j.diamond.2015.08.013 ↗
2. Wort · 2008
3. The role of sea spray in cleansing air pollution over ocean via cloud processes
4. High carrier mobility in ultrapure diamond measured by time-resolved cyclotron resonance10.1063/1.4891039 ↗
5. Diamond junction field-effect transistors with selectively grown n +-Side gates
6. High-temperature operation of diamond junction field-effect transistors with lateral p-n junctions10.1109/LED.2013.2271377 ↗
7. Diamond metal-semiconductor field-effect transistor with breakdown voltage over 1.5 kV10.1109/LED.2014.2356191 ↗
8. 600 V diamond junction field-effect transistors operated at 200$\circ{\rm C10.1109/LED.2013.2294969 ↗
9. Normally-off diamond junction field-effect transistors with submicrometer channel10.1109/LED.2015.2513074 ↗
10. Diamond bipolar junction transistor device with phosphorus-doped diamond base layer10.1016/j.diamond.2012.05.004 ↗
11. Fabrication of bipolar junction transistor on (001)-oriented diamond by utilizing phosphorus-doped n-type diamond base10.1016/j.diamond.2013.02.004 ↗
12. High-current metal oxide semiconductor field-effect transistors on h-terminated diamond surfaces and their high-frequency operation10.1143/JJAP.51.090111 ↗
13. Normally-off HfO2-gated diamond field effect transistors
14. Inversion channel diamond metaloxide-semiconductor field-effect transistor with normally off characteristics10.1038/srep31585 ↗
15. Durability-enhanced two-dimensional hole gas of C-H diamond surface for complementary power inverter applications10.1038/srep42368 ↗
16. Deep depletion concept for diamond MOSFET10.1063/1.4997975 ↗
17. Vertical-type two-dimensional hole gas diamond metal oxide semiconductor field-effect transistors10.1038/s41598-018-28837-5 ↗
18. Science and technology of integrated super-high dielectric constant AlOx/TiOy nanolaminates/diamond for MOS capacitors and MOSFETs10.1016/j.carbon.2020.10.031 ↗
19. Inversion channel MOSFET on heteroepitaxially grown free-standing diamond10.1016/j.carbon.2020.11.072 ↗
20. Sasama · 2021
21. Inversion channel mobility and interface state density of diamond MOSFET using N-type body with various phosphorus concentrations10.1063/1.5100328 ↗
22. Fabrication of inversion p-channel MOSFET with a nitrogen-doped diamond body10.1063/5.0075964 ↗
23. Conductive-probe atomic force microscopy and Kelvin-probe force microscopy characterization of OH-terminated diamond (111) surfaces with step-terrace structures10.7567/1347-4065/ab1b5c ↗
24. Microscopic evaluation of Al2O3/p-Type diamond (111) interfaces using scanning nonlinear dielectric microscopy
25. Takagi · 1994
26. 2D hole gas mobility at diamond/insulator interface10.1063/5.0002768 ↗
27. Selectively buried growth of heavily B doped diamond layers with step-free surfaces in N doped diamond (1 1 1) by homoepitaxial lateral growth10.1016/j.apsusc.2022.153340 ↗
28. Atomically flat diamond (111) surface formation by homoepitaxial lateral growth10.1016/j.diamond.2008.01.089 ↗
29. Growth of atomically step-free surface on diamond {111} mesas10.1016/j.diamond.2009.11.015 ↗
30. Formation of step-free surfaces on diamond (111) mesas by homoepitaxial lateral growth10.1143/JJAP.51.090107 ↗
31. Anisotropic lateral growth of homoepitaxial diamond (111) films by plasma-enhanced chemical vapor deposition10.7567/JJAP.53.04EH04 ↗
32. Formation of atomically flat hydroxyl-terminated diamond (1 1 1) surfaces via water vapor annealing10.1016/j.apsusc.2018.07.094 ↗
33. Sze · 2007
34. Impact of water vapor annealing treatments on Al2O3/diamond interface
35. Fabrication of lateral diamond MOSFET with buried pn-junctions by diamond surface planarization based on carbon solid solution into nickel10.1016/j.diamond.2024.111236 ↗
36. Takagi · 1994
37. Oxidized Si terminated diamond and its MOSFET operation with SiO2gate insulator
38. Formation of step-free surfaces on diamond (111) mesas by homoepitaxial lateral growth10.1143/JJAP.51.090107 ↗