Residual thermal stresses in carbon/carbon–Zr–Ti–C composites and their effects on the fracture behavior of composites with different preforms
Source abstract
Abstract
Carbon/carbon(C/C)–Zr–Ti–C composites were fabricated using chemical vapor infiltration and liquid metal infiltration processes. The residual thermal stress (RTS) distribution in the C/C–Zr–Ti–C composites was analyzed by Raman spectroscopy and finite element (FE) calculation. The mechanical behaviors of C/C–Zr–Ti–C composites with three types of carbon fiber preforms were tested. The results showed that there was very high compressive RTS in the fibers and high tensile RTS in the pyrocarbon (PyC) in the marginal region near the carbide. However, in the central region away from the carbide, relatively low compressive stress and tensile RTS were found in the fibers and PyC, respectively. The FE analysis showed that the introduction of carbide into the C/C composites caused a significant increase of the RTS in the PyC near the carbide, indicating that the carbide could change the RTS distribution in C/C composites. Moreover, the distribution of the RTS and its release combined with the carbide distribution and fiber architecture led to variations in the mechanical performance of composites with different preforms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Fabrication and characterization of 3-D Cf/ZrC composites by low-temperature liquid metal infiltration10.1016/j.compositesb.2013.09.029 ↗
2. Ablation behaviors of ultra-high temperature ceramic composites10.1016/j.msea.2007.02.040 ↗
3. Ablation properties of C/C–SiC composites tested on an arc heater10.1016/j.solidstatesciences.2011.09.010 ↗
4. Ablation resistance of different coating structures for C/ZrB2–SiC composites under oxyacetylene torch flame10.1111/j.1744-7402.2008.02320.x ↗
5. Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites10.1016/j.carbon.2013.01.059 ↗
6. C/SiC–ZrB2–ZrC composites fabricated by reactive melt infiltration with ZrSi2 alloy10.1016/j.ceramint.2012.05.035 ↗
7. Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr–Ti10.1016/j.carbon.2012.11.042 ↗
8. Thermal expansion of three group IVA carbides to 2700°C10.1111/j.1151-2916.1965.tb14647.x ↗
9. Axial thermal expansion of ZrO2 and HfO2 in the range room temperature to 1400°C10.1107/S0021889869007217 ↗
10. SiC/SiC–YAG–YSZ oxidation protective coatings for carbon/carbon composites10.1016/j.corsci.2013.01.013 ↗
11. Thermal expansion coefficient of 3C–SiC10.1063/1.115227 ↗
12. Study on the thermal expansion properties of C/C composites10.1007/s10853-006-1123-3 ↗
13. Residual stresses in thermoplastic composites—a study of the literature—Part I: formation of residual stresses10.1016/j.compositesa.2005.12.025 ↗
14. Fracture mechanics analysis of a crack in a residual stress field10.1023/A:1026574400858 ↗
15. Residual stresses in thermoplastic composites – a study of the literature. Part III: effects of thermal residual stresses10.1016/j.compositesa.2006.12.005 ↗
16. Physical and mechanical properties of high-performance thermoplastic polymers and their composites
17. Residual stress. Part 1 – measurement techniques10.1179/026708301101509980 ↗
18. Raman stress measurement in opaque industrial Cf/epoxy composites submitted to tensile strain10.1016/j.compositesa.2005.05.004 ↗
19. Micro-Raman stress imaging of ceramic (C, SiC)-fiber-reinforced ceramic-matrix and metal-matrix composites10.1016/S0921-5093(00)00873-X ↗
20. Physical chemistry and mechanical imaging of ceramic-fibre-reinforced ceramic or metal-matrix composites10.1016/S0266-3538(00)00112-3 ↗
21. Application of Raman microscopy to the analysis of silicon carbide monofilaments10.1023/B:JMSC.0000045606.60263.27 ↗
22. Determination of residual stresses in SiC monofilament reinforced metal-matrix composites using Raman spectroscopy10.1016/S1359-835X(02)00157-4 ↗
23. Residual stress measurement in thin carbon films by Raman spectroscopy and nanoindentation10.1016/S0040-6090(03)00276-1 ↗
24. Effects of needle-punched felt structure on the mechanical properties of carbon/carbon composites10.1016/S0008-6223(02)00445-1 ↗
25. Mechanical behavior of two-dimensional carbon/carbon composites with interfacial carbon layers10.1016/S0008-6223(99)00074-3 ↗
26. Effect of pyrocarbon content in C/C preforms on microstructure and mechanical properties of the C/C–SiC composites10.1016/j.msea.2008.11.026 ↗
27. Mechanical properties and fracture behaviors of C/C composites with PyC/TaC/PyC, PyC/SiC/TaC/PyC multi-interlayers10.1016/j.solidstatesciences.2009.04.021 ↗
28. Residual thermal stresses in fibre reinforced composite materials – a review
29. Method to predict the effect of thermal residual stresses on the free-edge delamination behavior of fibre reinforced composite laminates10.1177/002199839803200502 ↗
30. Effect of fiber architecture and density on the ablation behavior of carbon/carbon composites modified by Zr–Ti–C10.1016/j.carbon.2013.06.043 ↗
31. Raman spectroscopic study of the stress distribution in continuous fibre-reinforced ceramic matrix composites10.1002/(SICI)1097-4555(199707)28:7<523::AID-JRS132>3.0.CO;2-G ↗
32. Development of a universal stress sensor for graphene and carbon fibres10.1038/ncomms1247 ↗
33. Internal stresses in ceramics10.1111/j.1151-2916.1961.tb15475.x ↗
34. Computer simulation of thermal residual stress of carbon fiber/PPESK composite10.1177/096369350701600104 ↗
35. Characterization of fibre/matrix interfaces in carbon/carbon composites10.1016/j.compscitech.2008.09.023 ↗