Influence of carbon structure of the anode on the synthesis of single-walled carbon nanotubes in a carbon arc plasma
Source abstract
Abstract
Abstract Arc plasma evaporation of carbon electrodes doped with various catalysts is one of the most effective methods of single-walled carbon nanotube fabrication. It was found that the reaction yield is strongly influenced not only by the appropriate choice of the catalyst(s), but also by the type of carbon material used for electrode fabrication. Several different carbon powders i.e. graphite powders, glassy carbon and coke, have been tested in order to establish which parameters (primary particle size, granulation, density or conductivity of the electrode) affected the outcome of the reaction the most. The highest yield of single-walled nanotubes was found for anodes fabricated from graphite powders, whilst the electrodes made from glassy carbon or coke yielded significantly smaller amounts of nanotubes. The reaction zone where carbon radicals nucleate (close to the arc gap) was probed by optical absorption spectroscopy. The estimated temperature distributions and contents of C 2 radicals did not depend on the anode characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Diamond and Carbon-based Materials Research · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. High yield of single-wall carbon nanotubes by arc discharge using Rh–Pt mixed catalysts10.1016/S0009-2614(98)00921-X ↗
2. Macroscopic oriented web of single wall carbon nanotubes10.1016/S0009-2614(03)00610-9 ↗
3. Large-scale purification of single-wall carbon nanotubes prepared by electric arc discharge10.1016/j.diamond.2005.11.002 ↗
4. Huczko A, Lange H, Bystrzejewski M, Zhao X, Inoue S, Ando Y. Influence of Fe-doped graphite characteristics on Ar–H2 carbon arc plasma and SWCNT formation. In: Electronic properties of novel nanostructures AIP proceedings, vol. 786; 2005. p. 92–5.10.1063/1.2103828 ↗
5. Formation of SWCNTs in arc plasma: effect of graphitization of Fe-doped anode and optical emission studies10.1166/jnn.2006.317 ↗
6. Large scale production of single-walled carbon nanotubes by induction thermal plasma10.1088/0022-3727/40/8/S17 ↗
7. Influence of carbon structure on carbon nanotube formation and carbon arc plasma10.1016/j.diamond.2005.11.026 ↗
8. Development of Fe-doped carbon electrode for mass-producing high-yield single-wall carbon nanotubes10.1016/j.diamond.2006.11.012 ↗
9. A significant improvement of both yield and purity during SWCNT synthesis via the electric arc process10.1016/j.carbon.2007.03.044 ↗
10. The mechanistics of fullerene formation10.1016/0009-2614(92)85310-7 ↗
11. Optoelectronic control of arc gap during formation of fullerenes and carbon nanotubes10.1063/1.1148016 ↗
12. Temperatures and C2 column densities in a carbon arc plasma10.1088/0022-3727/32/9/313 ↗
13. Spectrum line profiles: the Voigt function10.1016/0022-4073(67)90057-X ↗
14. Large-scale production of single-walled carbon nanotubes by the electric-arc technique10.1038/41972 ↗
15. Double resonance Raman spectroscopy of single-wall carbon nanotubes
16. Optical transition energies for carbon nanotubes from resonant Raman spectroscopy: environment and temperature effects10.1103/PhysRevLett.93.147406 ↗