Tensile loading behavior of carbon nanotube wires
Source abstract
Abstract
Abstract The mechanical behavior of four carbon nanotube (CNT) wires, comprised of 1-yarn, 30-yarn, 60-yarn, and 100-yarn, was investigated under constant tension at two loading rates of 0.02 mm/s and 2 mm/s. Tests were conducted with both as-fabricated and pre-stressed wires. The ultimate tenacity or apparent ultimate tensile strength of all four wires was found to be independent of loading rate, with those for the single-yarn wire about twice those of the multiple-yarn wires. Strain at a given stress level and failure strain of the multiple-yarn wires before pre-stressing were almost an order of magnitude larger than those for the single-yarn wire, and this difference was reduced considerably after pre-stressing. The failure mechanisms of 1-yarn wire or twisted individual yarns in multiple-strand wires involved ductile (necking) deformation and fibrillar breakage. Inner yarns in multiple-yarn wires initially failed at the same location, followed by outer yarns failing at different locations. Additionally, sliding occurred between individual yarns, and twisting of the yarns accompanied by surface wear took place in the multiple-yarn wires, which contributed to their failure at a lower load compared to the single-yarn wire.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Carbon Nanotubes in Composites · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Helical micro-tubules of graphitic carbon10.1038/354056a0 ↗
2. Single-shell carbon nanotubes of 1-nm diameter10.1038/363603a0 ↗
3. Large-scale synthesis of carbon nanotubes10.1038/358220a0 ↗
4. Multifunctional carbon nanotube yarns and transparent sheets: fabrication, properties, and applications10.1016/j.physb.2006.12.061 ↗
5. Nanowires and nanotubes10.1016/S0928-4931(02)00240-0 ↗
6. Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties10.1103/PhysRevLett.84.5552 ↗
7. Strong carbon-nanotube fibers spun from long carbon-nanotube arrays10.1002/smll.200600368 ↗
8. Multifunctional carbon nanotube yarns by downsizing an ancient technology10.1126/science.1104276 ↗
9. Dorr J. Delivering on the promise in real-world applications nanotechnology magazine. IEEE 2010, p. 10–3.10.1109/MNANO.2010.936602 ↗
10. Hearle · 1998
11. The flex fatigue of polyamide and polyester fibres10.1007/BF00351594 ↗
12. Compressive strength analysis for high performance fibers with different modulus in tension and compression10.1177/0021998308088589 ↗
13. Flexural fatigue and surface abrasion of Kevlar-29 and other high-modulus fibres10.1007/BF00553932 ↗