Hard-templating of carbon using porous SiO2 monoliths revisited - Quantitative impact of spatial confinement on the microstructure evolution
Source abstract
Abstract
Abstract Hard-templating of porous SiO2 is one of the major approaches for the synthesis of porous carbons, frequently utilized in separation/adsorption as well as in energy storage applications. A high degree of structural order on the atomic scale, i.e. size and the disorder of the carbon microstructure is desirable, which is closely related to physical and chemical properties such as the electrical/thermal conductivity and the corrosion resistance. Usually, the evolution of the carbon microstructure is known to be foremost dominated by the chemical nature of the precursor and the applied heat-treatment. This work for the first time quantitatively examines the influence of spatial confinement on the microstructural development experienced throughout the nanocasting process in monolithic meso-macroporous SiO2, by employing an advanced evaluation approach for wide-angle X-ray scattering data of non-graphitic carbons. The hard-templating process was characterized by SEM, mercury intrusion porosimetry and N2-physisorption, revealing that the carbon precursor is exclusively located within the mesopores of the templates. The structural characterization of the obtained porous carbons showed that the size and disorder of the graphene stacks is massively influenced by the spatial confinement during the nanocasting process, proving that spatial restrictions are an important synthesis parameter and need to be carefully considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Pores in carbon materials-importance of their control10.1016/S1872-5805(08)60048-7 ↗
2. Templated nanoscale porous carbons10.1039/b9nr00207c ↗
3. Morphology and pore control in carbon materials via templating10.1039/c1ra00608h ↗
4. Templated mesoporous carbons: synthesis and applications10.1016/j.carbon.2016.06.003 ↗
5. Porous graphitized carbon for adsorptive removal of benzene and the electrothermal regeneration10.1021/es303069j ↗
6. Synthesis of nitrogen doped mesoporous carbons for carbon dioxide capture10.1039/C5RA05684E ↗
7. Synthesis of carbon monolith with bimodal meso/macroscopic pore structure and its application in asymmetric catalysis10.1016/j.cattod.2009.09.005 ↗
8. Facile synthesis of hierarchically ordered porous carbon via in situ self-assembly of colloidal polymer and silica spheres and its use as a catalyst support10.1021/cm1002274 ↗
9. Templated nanocarbons for energy storage10.1002/adma.201201715 ↗
10. Negative electrodes for Na-ion batteries10.1039/c4cp00826j ↗
11. Interconnected mesoporous carbon sheet for supercapacitors from low-cost resources10.1016/j.matlet.2015.05.157 ↗
12. Carbon materials for electrochemical capacitors10.1016/j.jpowsour.2010.06.036 ↗
13. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
14. The role of ferrocene on the enhancement of the mechanical and electrochemical properties of coal tar pitch-based carbon foams10.1007/s10853-013-7518-z ↗
15. Cystallite growth in graphitizing and non-graphitizing carbons
16. X-Ray diffraction in random layer lattices10.1103/PhysRev.59.693 ↗
17. High surface area graphitized carbon with uniform mesopores synthesised by a colloidal imprinting method10.1039/b200702a ↗
18. A synthetic route to ordered mesoporous carbon materials with graphitic pore walls10.1002/anie.200352224 ↗
19. Template synthesis of a new type of ordered carbon structure from pitch10.1039/b305295h ↗
20. Control of crystalline structure of porous carbons10.1039/C4RA06730D ↗
21. Carbonization and graphitization10.1016/0008-6223(84)90086-1 ↗
22. Microtexture and structure of semi-cokes and cokes10.1016/0016-2361(86)90323-6 ↗
23. Investigation of the microstructure of disordered, non-graphitic carbons by an advanced analysis method for Wide-Angle X-ray Scattering
24. Analysis of thermally induced changes in the structure of coal tar pitches by an advanced evaluation method of X-ray scattering data10.1016/j.carbon.2016.08.031 ↗
25. The graphitization temperature threshold analyzed through a second-order structural transformation10.1016/j.carbon.2016.08.041 ↗
26. Graphitization of carbons synthesized in a confined geometry10.1016/j.carbon.2006.09.010 ↗
27. Synthesis of hierarchically porous carbon monoliths with highly ordered microstructure and their application in rechargeable lithium batteries with high-rate capability10.1002/adfm.200601152 ↗
28. X-ray scattering of non-graphitic carbon: an improved method of evaluation10.1107/S0021889802011007 ↗
29. Colloidal and supramolecular aspects of carbon
30. Fractionation of a coal tar pitch by ultra-filtration, and characterization by size exclusion chromatography, UV-fluorescence and laser desorption-mass spectroscopy10.1016/j.fuel.2010.04.011 ↗
31. Morphological analysis of physically reconstructed silica monoliths with submicrometer macropores: effect of decreasing domain size on structural homogeneity10.1021/la5046018 ↗
32. Sol-gel with phase separation hierarchically porous materials optimized for high-performance liquid chromatography separations10.1021/ar600034p ↗
33. Hierarchically porous monolithic LiFePO4/carbon composite electrode materials for high power lithium ion batteries10.1021/cm9024167 ↗
34. Pore structure control of silica gels based on phase separation10.1023/A:1009627216939 ↗
35. The effect of hydrothermal treatment on column performance for monolithic silica capillary columns10.1016/j.chroma.2011.04.008 ↗
36. In-Depth investigation of the carbon microstructure of silicon carbide-derived carbons by Wide-Angle X-ray Scattering10.1021/jp502832x ↗
37. A reconsideration of the relationship between the crystallite size La of carbons determined by X-ray diffraction and Raman spectroscopy10.1016/j.carbon.2006.06.029 ↗
38. On the use of mesophase pitch for the preparation of hierarchical porous carbon monoliths by nanocasting10.1088/1468-6996/13/1/015010 ↗
39. A Simple melt impregnation method to synthesize ordered mesoporous carbon and carbon nanofiber bundles with graphitized structure from pitches10.1021/jp046948n ↗
40. Morphological analysis of disordered macroporous-mesoporous solids based on physical reconstruction by nanoscale tomography10.1021/la502381m ↗
41. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
42. Graphitization of soft carbons
43. Microtexture of Mesophase spheres as studied by high resolution conventional transmission electron microscopy (CTEM)10.1016/0008-6223(80)90005-6 ↗
44. Carbonization of various precursors. Effect of heating rate Part II : transmission electron microscopy and physicochemical studies10.1016/S0008-6223(99)00044-5 ↗