Desirable electrical and mechanical properties of continuous hybrid nano-scale carbon fibers containing highly aligned multi-walled carbon nanotubes
Source abstract
Abstract
Abstract The continuous highly aligned hybrid carbon nanofibers (CNFs) with different content of acid-oxidized multi-walled carbon nanotubes (MWCNTs) were fabricated through electrospinning of polyacrylonitrile (PAN) followed by a series of heat treatments under tensile force. The effects of MWCNTs on the micro-morphology, the degree of orientation and ordered crystalline structure of the resulting nanofibers were analyzed quantitatively by diversified structural characterization techniques. The orientation of PAN molecule chains and the graphitization degree in carbonized nanofibers were distinctly improved through the addition of MWCNTs. The electrical conductivity of the hybrid CNFs with 3 wt% MWCNTs reached 26 S/cm along the fiber direction due to the ordered alignment of MWCNTs and nanofibers. The reinforcing effect of hybrid CNFs in epoxy composites was also revealed. An enhancement of 46.3% in Young’s modulus of epoxy composites was manifested by adding 5 wt% hybrid CNFs mentioned above. At the same time, the storage modulus of hybrid CNF/epoxy composites was significantly higher than that of pristine epoxy and CNF/epoxy composites not containing MWCNTs, and the performance gap became greater under the high temperature regions. It is believed that such a continuous hybrid CNF can be used as effective multifunctional reinforcement in polymer matrix composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Fiber-reinforced polymer composites · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Morgan · 2005
2. Donnet · 1998
3. A review on polymer nanofibers by electrospinning and their applications in nanocomposites10.1016/S0266-3538(03)00178-7 ↗
4. Polyacrylonitrile-based nanofibers-A state-of-the-art review
5. Preparation and electrochemical characterization of ionicconducting lithium lanthanum titanate oxide/polyacrylonitrile submicron composite fiber-based lithium-ion battery separators10.1016/j.jpowsour.2010.06.088 ↗
6. Schildknecht · 1952
7. Experimental evaluation of man-made fibre brittleness10.1007/BF00545381 ↗
8. A review of heat treatment on polyacrylonitrile fiber10.1016/j.polymdegradstab.2007.03.023 ↗
9. Alkaline hydrolysis of polyacrylonitrile on the reaction mechanism10.1002/1521-3935(20001101)201:16<2176::AID-MACP2176>3.0.CO;2-5 ↗
10. Preparation, characterization, and performance of sulfated chitosan/polyacrylonitrile composite nanofiltration membranes10.1080/01932691.2012.662432 ↗
11. Carbon nanofibers: a new ultrahigh-strength material for chemical technology10.1023/A:1026082323244 ↗
12. The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption10.1016/j.jcis.2007.10.024 ↗
13. Continuous nanoscale carbon fibers with superior mechanical strength10.1002/smll.200801440 ↗
14. Strong electrospun nanometer-diameter polyacrylonitrile carbon fiber yarns10.1016/j.carbon.2009.06.027 ↗
15. Electrospun polyacrylonitrile nanofibers containing a high concentration of well-aligned multiwall carbon nanotubes10.1021/cm0484955 ↗
16. Carbon nanotube–polymer composites: chemistry, processing, mechanical and electrical properties10.1016/j.progpolymsci.2009.09.003 ↗
17. Aligned carbon nanotube arrays formed by cutting a polymer resin–nanotube composite10.1126/science.265.5176.1212 ↗
18. Small but strong: a review of the mechanical properties of carbon nanotube polymer composites10.1016/j.carbon.2006.02.038 ↗
19. Modifications of carbon nanotubes with polymers10.1016/j.eurpolymj.2005.05.017 ↗
20. Chemistry of carbon nanotubes10.1021/cr050569o ↗
21. Significant improvement of mechanical properties observed in highly aligned carbon-nanotube-reinforced nanofibers10.1021/jp8077198 ↗
22. Anisotropic electrical conductivity of MWCNT/PAN nanofiber paper10.1016/j.cplett.2005.07.061 ↗
23. Prescribed morphology and interface correlation of MWNTs-EP/PSF hybrid nanofibers reinforced and toughened epoxy matrix10.1016/j.matchemphys.2012.03.098 ↗
24. Effects of parameters on nanofiber diameter determined from electrospinning model10.1016/j.polymer.2007.09.017 ↗
25. Stabilization and carbonization of gel spun polyacrylonitrile/single wall carbon nanotube composite fibers10.1016/j.polymer.2007.04.072 ↗
26. PAN-based carbon fibers–present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parameters10.1016/0008-6223(89)90197-8 ↗
27. Hydrogen passivation induced dispersion of multi-walled carbon nanotubes10.1002/adma.201104337 ↗
28. Preparation of activated carbon fibres from acrylic textile fibres10.1016/S0008-6223(00)00271-2 ↗
29. A method for structural characterization of the range of cylindrical nanocarbons: nanotubes to nanofibers10.1016/j.carbon.2005.06.026 ↗
30. Improved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning10.1016/j.carbon.2011.12.021 ↗
31. Influence of heat treatment on physical–chemical properties of PAN-based carbon fiber10.1016/j.ceramint.2005.02.014 ↗