Cleaning organized single-walled carbon nanotube interconnect structures for reduced interfacial contact resistance
Source abstract
Abstract
A method is presented for significantly reducing the interfacial contact resistance of single-walled carbon nanotube (SWCNT) interconnects test-structures. Conventional lithographic cleaning steps are insufficient for complete removal of lithographic residues in SWCNT networks, leading to large interfacial contact resistance. Using improved purification procedures and controlled developing time, the interfacial contact resistance between SWCNTs and contact electrodes of Ti/Au were found to reach values below 2% of the overall resistance in two-probe test-structures of SWCNTs, demonstrating the importance of cleaning lithographic residues from the surface of SWCNTs before the fabrication of metal electrodes. These low-resistance contacts are quite stable over a large temperature range, and represent a step towards the implementation of SWCNTs as future interconnects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Carbon-based electronics10.1038/nnano.2007.300 ↗
2. Terahertz applications of carbon nanotubes10.1016/j.spmi.2007.07.026 ↗
3. Integrated three-dimensional microelectromechanical devices from processable carbon nanotube wafers10.1038/nnano.2008.98 ↗
4. Characterization of single-walled carbon nanotube mats and their performance as electromechanical actuators10.1016/j.carbon.2008.03.019 ↗
5. Nano electromechanical sensors based on carbon nanotubes10.1016/j.sna.2007.02.007 ↗
6. High-mobility nanotube transistor memory10.1021/nl025577o ↗
7. Reliability and current carrying capacity of carbon nanotubes10.1063/1.1396632 ↗
8. Building highly organized single-walled-carbon–nanotube networks using template-guided fluidic assembly10.1002/smll.200700292 ↗
9. Mechanism of very large scale assembly of SWNTs in template guided fluidic assembly process10.1021/ja8076523 ↗
10. Highly aligned scalable Platinum-decorated single-wall carbon nanotube arrays for nanoscale electrical interconnects10.1021/nn9007753 ↗
11. Quantum conductance of carbon nanotubes with defects10.1103/PhysRevB.54.2600 ↗
12. Carbon nanotube intramolecular junctions10.1038/46241 ↗
13. Molecular electronics with carbon nanotubes10.1021/ar010152e ↗
14. Carbon nanotube interconnection and its electrical properties for semiconductor applications10.1143/JJAP.48.125006 ↗
15. The effect of the geometry and material properties of a carbon joint produced by electron beam induced deposition on the electrical resistance of a multiwalled carbon nanotube-to-metal contact interface10.1088/0957-4484/21/3/035202 ↗
16. Contact resistance between metal and carbon nanotube interconnects: effect of work function and wettability10.1063/1.3255016 ↗
17. Electrical characterization of devices based on carbon nanotube films
18. Contact resistance modulation in carbon nanotube devices investigated by four-probe experiments
19. Contact resistance in carbon nanostructure via interconnects10.1063/1.3123164 ↗
20. Contacting carbon nanotubes selectively with low-ohmic contacts for four-probe electric measurements10.1063/1.121778 ↗
21. Effects of local Joule heating on the reduction of contact resistance between carbon nanotubes and metal electrodes10.1063/1.2430769 ↗
22. Textured network devices: overcoming fundamental limitations of nanotube/nanowire network-based devices10.1002/smll.200801500 ↗
23. Intrinsic response of graphene vapor sensors10.1021/nl8033637 ↗