The effect of iron catalysts on the microstructure and tribological properties of carbide-derived carbon
Source abstract
Abstract
Abstract Carbide-derived carbon (CDC) films were synthesized on sintered SiC by selective etching at high temperatures. Iron particles were used as a catalyst during the high temperature chlorination process to examine the effect of the catalytic particles on the structure and tribological behavior of CDC films. Chlorination was carried out at temperatures ranging from 1000 to 1200 °C. The structure of the synthesized CDC was characterized and examined by Raman spectroscopy, transmission and scanning electron microscopy. The surface features of the films were analyzed using Auger electron spectroscopy. The results showed that the thickness did not change but the crystallinity was increased by adding the iron catalyst. No significant changes in the coefficient of friction were observed. The wear rate was reduced by adding the catalyst but the decrease was minimized by increasing the processing temperature up to 1150 °C. The observed improvement in the wear resistance was attributed to the increase in hardness as a result of the increase in crystalline phases, such as carbon nanotubes and onion like carbon, due to the presence of the iron catalyst.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Formation of carbon films on carbides under hydrothermal conditions10.1038/367628a0 ↗
2. Tribological properties of carbon coatings produced by high temperature chlorination of silicon carbide10.1080/10402000008982412 ↗
3. Carbon coatings produced by high temperature chlorination of silicon carbide ceramics10.1007/s100190100136 ↗
4. Synthesis and tribology of carbide-derived carbon films10.1111/j.1744-7402.2006.02083.x ↗
5. Effect of humidity on the tribological properties of carbide-derived carbon (CDC) films on silicon carbide10.1023/A:1023508006745 ↗
6. Nano-structured carbide-derived carbon films and their tribology10.1016/S1007-0214(05)70138-3 ↗
7. Effects of high-temperature hydrogenation treatment on sliding friction and wear behavior of carbide-derived carbon films10.1016/j.surfcoat.2004.07.052 ↗
8. Sliding wear of silicon carbide modified by etching with chlorine at various temperatures10.1016/j.wear.2008.06.021 ↗
9. Nanostructured carbide-derived carbon
10. Tribological behavior of carbon nanotube composite coatings on C/C composite
11. Catalytic effects of metals of the iron subgroup on the chlorination of titanium carbide to form nanostructural carbon10.1016/S0008-6223(02)00019-2 ↗
12. Effect of transition metal catalysts on the microstructure of carbide-derived carbon10.1016/j.carbon.2009.04.018 ↗
13. Carbon coatings on silicon carbide by reaction with chlorine-containing gases10.1039/a701126a ↗
14. Kinetics of conversion of silicon carbide to carbide derived carbon
15. The effect of graphitization catalyst on the structure and porosity of SiC derived carbons10.1016/j.carbon.2008.07.003 ↗
16. Investigation of structural properties of amorphous carbon nitride thin films prepared by xenon chloride pulsed laser deposition of camphoric carbon precursor
17. Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites10.1016/S0043-1648(02)00012-1 ↗