journal article·2017-09

The effect of filtered nanoparticles on gas filtration efficiency of granular activated carbons

Changhyuk Kim, Handol Lee, Adam Juelfs, Christy L. Haynes, David Y.H. Pui

Carbon· Volume 121
Publisher page

Abstract

Abstract Granular activated carbons (GACs) are widely used porous materials for removing gaseous contaminants in the air. In addition, GACs can work as pack-bed filters for removing particles. However, the filtered particles may block the pores of GACs, which are capture sites for gaseous contaminants, and reduce their gas filtration efficiency. In this study, the effect of the filtered particles on GAC gas filtration efficiency was investigated by measuring toluene penetration through GACs when nanoparticles were simultaneously introduced to the GACs. The nanoparticles were generated from toluene molecules through soft X-ray assisted gas-to-particle conversion and mixed in-situ with toluene molecules. The penetration of toluene through the GACs was determined by measuring the volume distribution of nanoparticles, which were converted from toluene molecules downstream of the GACs. By integrating the measured volume distribution of the nanoparticles, the total volume concentration of nanoparticles was calculated and plotted as a function of time. The time-resolved penetration of toluene remained the same regardless of the particle filtration by the GACs. Moreover, the GACs with different granule sizes had same time-resolved penetration of toluene. These experimental results showed that GACs can be used to remove nanoparticles and gas contaminants simultaneously without changing their gas filtration efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerosol Filtration and Electrostatic Precipitation · Membrane Separation Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. The role of surface acidity and pore size distribution in the adsorption of 2-methylisoborneol via powdered activated carbon10.1016/j.carbon.2006.11.009 ↗
2. Modification of activated carbon using sodium acetate and its regeneration using sodium hydroxide for the adsorption of copper from aqueous solution10.1016/j.carbon.2006.12.009 ↗
3. Bansal · 2005
4. Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review
5. A review of the effects of covapors on adsorption rate coefficients of organic vapors adsorbed onto activated carbon from flowing gases10.1016/S0008-6223(01)00185-3 ↗
6. Clay-iron oxide magnetic composites for the adsorption of contaminants in water10.1016/S0169-1317(02)00156-4 ↗
7. Development of KOH activated high surface area carbon and its application to drinking water purification10.1016/S0008-6223(97)00076-6 ↗
8. Adsorption of elemental mercury vapor by impregnated activated carbon from a commercial respirator cartridge10.1016/j.powtec.2008.11.012 ↗
9. Automobile adsorption air-conditioning system using oil palm biomass-based activated carbon: a review10.1016/j.rser.2011.01.012 ↗
10. Removal of micropollutants and reduction of biological activity in a full scale reclamation plant using ozonation and activated carbon filtration10.1016/j.watres.2009.09.048 ↗
11. Soft X-ray-assisted detection method for airborne molecular contaminations (AMCs)10.1007/s11051-015-2936-2 ↗
12. Surface modification and characterisation of a coal-based activated carbon10.1016/j.carbon.2005.06.021 ↗
13. Role of granular activated carbon surface chemistry on the adsorption of organic compounds. 1. Priority pollutants10.1021/es981016g ↗
14. A review on reactive adsorption for potential environmental applications10.1007/s10450-012-9436-9 ↗
15. Experimental study of nanoparticles penetration through commercial filter media10.1007/s11051-006-9176-4 ↗
16. Removal of nanoparticles from gas streams by fibrous filters: a review
17. Experimental study on the filtration efficiency of activated carbons for 3–30 nm particles10.1016/j.carbon.2015.05.048 ↗
18. Removal of airborne sub-3 nm particles using fibrous filters and granular activated carbons10.1016/j.carbon.2016.03.060 ↗
19. Breakthrough curves for toluene adsorption on different types of activated carbon fibers: application in respiratory protection
20. Real-time and on-line screening method for materials emitting volatile organic compounds10.1007/s11051-016-3598-4 ↗
21. Secondary organic aerosol formation during the photooxidation of toluene: NOx dependence of chemical composition10.1021/jp071419f ↗
22. Adsorption of toluene on carbon nanofibers prepared by electrospinning10.1016/j.scitotenv.2008.01.005 ↗
23. Simultaneous determination of toluene diffusion coefficient in air from thin tube evaporation and sessile drop evaporation on a solid surface10.1021/la011557a ↗
24. Hinds · 1998
25. Critical appraisal of classical methods for determination of mesopore size distributions of MCM-41 materials10.1016/S0169-4332(02)00060-0 ↗
26. Efficient metal-free oxygen reduction in alkaline medium on high-surface-area mesoporous nitrogen-doped carbons made from ionic liquids and nucleobases10.1021/ja108039j ↗
27. Catalytic oxidation of toluene and m-xylene by activated carbon fiber impregnated with transition metals10.1016/j.carbon.2005.06.039 ↗
28. Agricultural residues as precursors for activated carbon production-a review10.1016/j.rser.2006.03.013 ↗
29. Adsorption of organic molecules from aqueous solutions on carbon materials10.1016/j.carbon.2003.09.022 ↗