journal article·2015-08Open access

Synthesis and characterization of boron substituted carbon deposits on PFA-derived carbon substrates for hydrogen adsorption

Ali Qajar, BillyPaul M. Holbrook, Maryam Peer, Ramakrishnan Rajagopalan, Henry C. Foley, Michael Davis, Karl T. Mueller

Carbon· Volume 89

Abstract

Abstract The effect of boron substituted carbon (BC x , x ∼ 3–5) coatings on the hydrogen adsorption properties of porous carbons was investigated via spectroscopic characterization and hydrogen adsorption measurements. Thin films of BC x were synthesized by reacting BCl 3 and benzene in a chemical vapor and then depositing the product as a solid (CVD). The BC x deposits were collected on microporous carbon substrates and mesoporous silica aerogel. High-resolution solid-state boron NMR, 11 B HR-NMR, detected boron atoms in a symmetric chemical environment with trigonal coplanar coordination. Results from analyses based on NMR, X-ray photoelectron spectroscopy (XPS), and d-spacings, calculated from electron diffraction and X-ray diffraction (XRD) patterns, indicated that 17 at.% boron was substitutionally incorporated into the carbon framework. Thus the material has an empirical formula of BC 4.9 . Hydrogen adsorption data were collected at 100 bar and 25 °C. The BC x coatings reduced the surface area of the porous substrates by 30–50%. However, at the same time, they increased the heat of adsorption and the adsorption capacities per unit area by as much as a factor of five. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTs) revealed wagging energies at 1190 cm −1 attributable to hydrogen interactions with C–B–C bonds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Boron and Carbon Nanomaterials Research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Hydrogen storage on carbon-based adsorbents and storage at ambient temperature by hydrogen spillover10.1080/01614940.2010.520265 ↗
2. Optimum conditions for adsorptive storage10.1021/la0523816 ↗
3. Determination of the adsorption isotherms of hydrogen on activated carbons above the critical temperature of the adsorbate over wide temperature and pressure ranges10.1021/la001381x ↗
4. A review of boron enhanced nanoporous carbons for hydrogen adsorption: numerical perspective10.1007/s10450-010-9235-0 ↗
5. Enhanced hydrogen adsorption in boron substituted carbon nanospaces10.1063/1.3251788 ↗
6. Enhancement of H2 adsorption on a boron-doped carbon system for hydrogen storage10.1016/j.ssc.2010.08.028 ↗
7. DFT study of hydrogen storage by spillover on graphene with boron substitution10.1021/jp200038b ↗
8. Manipulation of hydrogen binding energy and desorption kinetics by boron doping of high surface area carbon10.1021/jp3066037 ↗
9. Synthesis of microporous boron-substituted carbon (B/C) materials using polymeric precursors for hydrogen physisorption10.1021/ja800071y ↗
10. The synthesis and characterization of super-activated carbon containing substitutional boron (BCx) and its applications in hydrogen storage10.1016/j.carbon.2010.03.029 ↗
11. Enhanced binding energy and slow kinetics of H2 in boron-substituted graphitic carbon10.1021/jp102972c ↗
12. Hydrogen storage in boron substituted carbon nanotubes10.1016/j.carbon.2007.04.011 ↗
13. A novel graphite-like material of composition BC3 and nitrogen–carbon graphites10.1039/C39860001758 ↗
14. Boron-carbon-nitrogen materials of graphite-like structure10.1016/0025-5408(87)90058-4 ↗
15. Crystal structures and metastability of carbon–boron compounds C3B and C5B10.1103/PhysRevB.87.094103 ↗
16. First-principles studies of structural and electronic properties of hexagonal BC510.1103/PhysRevB.73.214116 ↗
17. Ultraviolet and visible Raman spectroscopic of the graphitic BCx phases10.1016/j.diamond.2009.02.025 ↗
18. Raman scattering from boron-substituted carbon films10.1103/PhysRevB.54.144 ↗
19. Microstructure and thermophysical properties of B4C/graphite composites containing substitutional boron10.1016/j.carbon.2012.08.066 ↗
20. Silicon-carbide/boron-containing coatings for the oxidation protection of graphite10.1016/0008-6223(94)00178-3 ↗
21. Solid solution of boron in graphite10.1111/j.1151-2916.1967.tb15064.x ↗
22. The formation and oxidation of BC3. A new graphite like material10.1016/0008-6223(93)90119-U ↗
23. Influence of boron on carbon fiber microstructure, physical properties, and oxidation behavior10.1016/0008-6223(91)90076-U ↗
24. An investigation of vapor deposited boron rich carbon – novel graphite-like material – part I: the structure of BCx (C6B) thin films10.1016/S0008-6223(98)00166-3 ↗
25. The role of substitutional boron in carbon oxidation10.1016/S0008-6223(98)00156-0 ↗
26. Effect of boron on graphite oxidation – a theoretical study10.1016/S0008-6223(97)85361-4 ↗
27. Semi-empirical studies on electronic structures of a boron-doped graphite layer – implications on the oxidation mechanism10.1016/S0008-6223(97)00102-4 ↗
28. Synthesis and characterization of boron-doped carbons10.1016/0008-6223(94)00160-2 ↗
29. Synthesis and characterization of boron-substituted carbons10.1016/S0008-6223(99)00279-1 ↗
30. Effect of deposition temperature on boron-doped carbon coatings deposited from a BCl3–C3H6–H2 mixture using low pressure chemical vapor deposition10.1016/j.apsusc.2009.06.030 ↗
31. Decomposition reaction rate of BCl3–C3H6(propene)–H2 in the gas phase10.1021/jp3022503 ↗
32. Preparation and characterization of novel “sea-cucumber”-like structures containing carbon and boron10.1016/j.carbon.2004.04.029 ↗
33. Boron doped carbon powders formed at 1000°C and one atmosphere10.1016/j.carbon.2008.07.022 ↗
34. Production of boron carbides by IR laser-induced gas phase reactions10.1016/0925-9635(94)00249-5 ↗
35. Fabrication and microstructure of boron-doped isotropic pyrolytic carbon10.1016/j.carbon.2012.05.062 ↗
36. Templated pyrolytic carbon: the effect of poly(ethylene glycol) molecular weight on the pore size distribution of poly(furfuryl alcohol)-derived carbon10.1016/S0008-6223(03)00326-9 ↗
37. Characterization of micro and mesoporous materials using accelerated dynamics adsorption10.1021/la400999j ↗
38. Control of the pore size distribution and its spatial homogeneity in particulate activated carbon10.1016/j.carbon.2014.06.054 ↗
39. On the effects of emulsion polymerization of furfuryl alcohol on the formation of carbon spheres and other structures derived by pyrolysis of polyfurfuryl alcohol10.1016/j.carbon.2012.08.015 ↗
40. High pressure hydrogen adsorption apparatus: design and error analysis10.1016/j.ijhydene.2012.03.002 ↗
41. Review: phenomena of catalytic graphitization10.1007/BF00591464 ↗
42. Multinuclear NMR
43. Solid · 1983
44. Boron-11 NMR spectra of boranes, main-group heteroboranes, and substituted derivatives. Factors influencing chemical shifts of skeletal atoms10.1021/cr00010a007 ↗
45. Characterization of tricoordinate boron chemical shift tensors: definitive high-field solid-state nmr evidence for anisotropic boron shielding10.1021/jp004068c ↗
46. Properties of graphite prepared from boron-doped pitch as an anode for a rechargeable Li ion battery10.1016/S0008-6223(01)00152-X ↗
47. Effect of nanopore size distributions on trichloroethylene adsorption and desorption on carbogenic adsorbents10.1021/ie970745m ↗
48. Importance of pore size in high pressure hydrogen storage by porous carbons10.1016/j.ijhydene.2009.05.073 ↗
49. Tetrahydrofuran-induced K and Li doping onto poly(furfuryl alcohol)-derived activated carbon (PFAC): influence on microstructure and H2 sorption properties10.1021/la3002948 ↗
50. Hydrogen storage in a microporous metal−organic framework with exposed Mn2+ coordination sites10.1021/ja0656853 ↗
51. Hydrogen storage in metal-organic frameworks: a review10.1016/j.electacta.2013.10.190 ↗
52. Nanostructured adsorbents for hydrogen storage at ambient temperature: high-pressure measurements and factors influencing hydrogen spillover10.1039/c3ra44216k ↗