Reaction science of layer-by-layer thinning of graphene with oxygen neutrals at room temperature
Source abstract
Abstract
Abstract Controlling the layers and in-plane defects in multi-layer graphene is the key to exploiting the extraordinary properties of graphene. Layer-by-layer thinning under high-density oxygen neutrals was observed in situ during room-temperature reaction science using a remote oxygen plasma inside a high-voltage transmission electron microscopy. Even though the etching rate of graphene was higher at the edge than at the basal plane, etching started from both locations. Each etched layer was represented by the plasmon loss intensity in the electron energy loss spectrum. After exposure to the remote oxygen plasma, the electron diffraction pattern for the multi-layer graphene keep clear six-fold diffraction pattern. Raman spectroscopy revealed the formation of defects in multi-layer graphene. The nonthermal reaction of oxygen neutrals required for graphene etching was demonstrated by in situ transmission electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Semiconductor materials and devices · Surface and Thin Film Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Controlling the electronic structure of bilayer graphene10.1126/science.1130681 ↗
2. Direct observation of a widely tunable bandgap in bilayer graphene10.1038/nature08105 ↗
3. Optical transmittance of multilayer graphene10.1209/0295-5075/108/17007 ↗
4. Non-destructive measurement of photoexcited carrier transport in graphene with ultrafast grating imaging technique10.1016/j.carbon.2016.05.075 ↗
5. Mechanisms of graphene fabrication through plasma-induced layer-by-layer thinning10.1016/j.carbon.2016.04.072 ↗
6. Singular sheet etching of graphene with oxygen plasma10.1007/BF03353775 ↗
7. Atomic layer etching of graphene through controlled ion beam for graphene-based electronics10.1038/s41598-017-02430-8 ↗
8. Atomic layer etching of graphene for full graphene device fabrication10.1016/j.carbon.2011.08.058 ↗
9. Layer by layer etching of the highly oriented pyrolythic graphite by using atomic layer etching10.1149/2.061112jes ↗
10. Layer-controllable graphene by plasma thinning and post-annealing10.1016/j.apsusc.2018.02.100 ↗
11. Folding and stacking defects of graphene flakes probed by electron nanobeam10.1063/1.3615802 ↗
12. High-energy plasmon spectroscopy of freestanding multilayer graphene10.1103/PhysRevB.84.155416 ↗
13. Free-standing graphene at atomic resolution10.1038/nnano.2008.280 ↗
14. In situ transmission electron microscopy observation of silver oxidation in ionized/atomic gas10.1021/la202949c ↗
15. Electron microscopy of specimens in liquid10.1038/nnano.2011.161 ↗
16. In situ imaging of layer-by-layer sublimation of suspended graphene10.1007/s12274-010-1006-4 ↗
17. Revealing lattice disorder, oxygen incorporation and pore formation in laser induced two-photon oxidized graphene10.1016/j.carbon.2018.11.070 ↗
18. In-situ observation and atomic resolution imaging of the ion irradiation induced amorphisation of graphene10.1038/srep06334 ↗
19. Oxidation of suspended graphene: etch dynamics and stability beyond 1000 °c
20. Development of an environmental high-voltage electron microscope for reaction science10.1093/jmicro/dfs095 ↗
21. Direct observation of catalytic oxidation of particulate matter using in situ TEM10.1038/srep10161 ↗
22. Direct evaluation of grain boundary hydrogen embrittlement: a micro-mechanical approach10.1016/j.msea.2016.03.035 ↗
23. Electron knock-on cross section of carbon and boron nitride nanotubes10.1103/PhysRevB.75.245402 ↗
24. Accurate measurement of electron beam induced displacement cross sections for single-layer graphene10.1103/PhysRevLett.108.196102 ↗
25. EELS log-ratio technique for specimen-thickness measurement in the TEM10.1002/jemt.1060080206 ↗
26. Larsson · 2008
27. Measuring the energy of the graphite π + σ plasmon peak10.1002/sia.2221 ↗
28. Plasmon spectroscopy of free-standing graphene films10.1103/PhysRevB.77.233406 ↗
29. Reduced graphene oxide studied by X-ray photoelectron spectroscopy: evolution of plasmon mode10.1088/1742-6596/1121/1/012001 ↗
30. Atomic oxygen etching from the top edges of carbon nanowalls
31. Oxygen-driven unzipping of graphitic materials10.1103/PhysRevLett.96.176101 ↗
32. Oxidation of graphite by atomic oxygen: a first-principles approach10.1016/S0039-6028(03)00355-8 ↗
33. DFT and kinetics study of O/O2 mixtures reacting over a graphite (0001) basal surface10.1007/s00214-010-0798-3 ↗
34. Functionalization of graphene grown on metal substrate with atomic oxygen: enolate vs epoxide10.1021/ja503664k ↗
35. First-principles study of the atomic oxygen adsorption on the (0 0 0 1) graphite surface and dissolution10.1016/S0169-4332(01)00216-1 ↗
36. Adsorption of potassium and oxygen on graphite: a theoretical study10.1063/1.475732 ↗
37. Mechanisms for oxidative unzipping and cutting of graphene10.1021/nl202656c ↗
38. Kramida · 2019
39. Determination of negative ion density with optical emission spectroscopy in oxygen afterglow plasmas10.1063/1.121394 ↗
40. Lifetime of the metastable 5S0 state of atomic oxygen10.1103/PhysRevA.9.568 ↗
41. Stability of graphene edges under electron beam: equilibrium energetics versus dynamic effects10.1021/nn204148h ↗
42. Graphene at the edge: stability and dynamics10.1126/science.1166999 ↗
43. The coulomb scattering of relativistic electrons by nuclei10.1103/PhysRev.74.1759 ↗
44. Atomic-resolution imaging of lithium in Al3Li precipitates10.1103/PhysRevB.80.024110 ↗