Tailored crystalline width and wall thickness of an annealed 3D carbon foam composites and their mechanical properties
Source abstract
Abstract
Abstract Carbon nanostructures in form of 3D carbon foams are mainly popular in materials community because of their ultralow densities, variable morphologies, and remarkable properties, etc. One of these foams is Aerographite, which exhibits a tetrapodal interconnected morphology. Similar to other synthetic carbon structures, the lattice defects are formed during the synthesis of Aerographite, which can be healed by a post-thermal treatment. Aerographite shows a property dependency on wall thickness (number of graphitic layers), which affects both, the electrical and mechanical properties. In this study, the wall thickness is tailored by varying of the total reaction time during the replication process. The influence of the thermal treatment of Aerographite on its mechanical performance in an Aerographite-epoxy nanocomposite, by determining the fracture toughness (K1C) in three-point bending tests (SEN-3PB), is investigated. An increase of the fracture toughness with increasing wall thickness is observed for untreated Aerographite. The graphitization of Aerographite leads to a reduction of the mechanical properties, by increasing the crystalline width. Consequently, the measured fracture toughness is dependent on the graphitization, the calculated crystalline width and the wall thickness of tubes in the hollow Aerographite tetrapodal network. Finally, based on these relations, a phenomenological mechanical failure model is developed and briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Supercapacitor Materials and Fabrication · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. On the elastic properties of carbon nanotube-based composites: modelling and characterization10.1088/0022-3727/36/5/323 ↗
2. Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties10.1016/S0032-3861(99)00166-4 ↗
3. Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites10.1016/j.compositesa.2005.02.007 ↗
4. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - a comparative study10.1016/j.compscitech.2005.04.021 ↗
5. Enhanced mechanical properties of nanocomposites at low graphene content10.1021/nn9010472 ↗
6. Size and synergy effects of nanofiller hybrids includinggraphene nanoplatelets and carbon nanotubesin mechanical properties of epoxy composites10.1016/j.carbon.2012.07.021 ↗
7. Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite: mechanical, electrical and thermal properties10.1016/j.eurpolymj.2013.10.008 ↗
8. 3D carbon networks and their polymer composites, Fabrication and electromechanical investigations of under compressive load neat Aerographite and Aerographite-based PNCs10.1016/j.carbon.2016.09.046 ↗
9. Electro-mechanical piezoresistive properties of three dimensionally interconnected carbon aerogel (Aerographite)-epoxy composites10.1016/j.compscitech.2016.08.019 ↗
10. Mechanically strong and highly conductive graphene aerogel and its use as electrodes for electrochemical power sources10.1039/c1jm10239g ↗
11. Supercritical CO2-assisted preparation of 3D graphene-pyrrole/carbon nanotubes/polyaniline Nanoarchitectures for efficient supercapacitor electrodes10.1016/j.matlet.2014.10.086 ↗
12. Preparation of novel 3D graphene networks for supercapacitor applications10.1002/smll.201100990 ↗
13. Macroporous and monolithic anode based on polyaniline hybridized three-dimensional graphene for high-performance microbial fuel cells10.1021/nn204656d ↗
14. Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates10.1073/pnas.1210072109 ↗
15. Individual hollow and mesoporous aero-graphitic microtube based devices for gas sensing applications10.1063/1.4989841 ↗
16. Low powered, tunable and ultra-light aerographite sensor for climate relevant gas monitoring10.1039/C6TA05347E ↗
17. Lightweight and flexible graphene foam composites for high-performance electromagnetic interference shielding10.1002/adma.201204196 ↗
18. A tunable scaffold of microtubular graphite for 3D cell growth10.1021/acsami.6b00778 ↗
19. Mishra · 2017
20. Fabrication of macroscopically flexible and highly porous 3D semiconductor networks from interpenetrating nanostructures by a simple flame transport approach10.1002/ppsc.201300197 ↗
21. Marx · 2017
22. Aerographite: ultra lightweight, flexible nanowall, carbon microtube material with outstanding mechanical performance10.1002/adma.201200491 ↗
23. Structural evolution and growth mechanism of graphene domains on copper foil by ambient pressure chemical vapor deposition10.1016/j.cplett.2012.04.001 ↗
24. Growth model of carbon nanotubes10.1103/PhysRevLett.69.3100 ↗
25. Growth of carbon nanotubes10.1016/0921-5107(93)90184-O ↗
26. Evaluating the influence of defects on the young's modulus of carbon nanotubes using stochastic modeling
27. Mechanical properties of carbon nanotubes with vacancies and related defects10.1103/PhysRevB.70.245416 ↗
28. Influence of defects on Carrier injection in carbon nanotubes with defects10.7567/JJAP.54.065101 ↗
29. Fundamentals of the temperature-dependent electrical conductivity of a 3D carbon foam -Aerographite-10.1016/j.synthmet.2017.12.006 ↗
30. Interplay of wall number and diameter on the electrical conductivity of carbon nanotube thin films10.1016/j.carbon.2013.10.001 ↗
31. Dimensional crossover of thermal transport in few-layer graphene10.1038/nmat2753 ↗
32. Fracture, failure and compression behaviour of a 3D interconnected carbon aerogel (Aerographite) epoxy composite10.1016/j.compscitech.2015.11.002 ↗
33. Raman spectroscopy of carbon nanotubes10.1016/j.physrep.2004.10.006 ↗
34. Raman characterization of defects and dopants in graphene10.1088/0953-8984/27/8/083002 ↗
35. Annealing effect on disordered multi-wall carbon nanotubes10.1016/j.cplett.2003.09.027 ↗
36. Structural and surface modifications of carbon nanotubes when submitted to high temperature annealing treatments10.1016/j.jallcom.2011.11.007 ↗
37. Structural improvement of a bio-inspired 3D globular carbon foam by a continuously thermal treatment: a comprehensive study10.15761/AMS.1000132 ↗
38. Effect of thermal treatment on the structure of multi-walled carbon nanotubes10.1007/s11051-006-9113-6 ↗
39. Structural improvement of CVD multi-walled carbon nanotubes by a rapid annealing process10.1016/j.diamond.2012.01.029 ↗
40. PAN fiber diameter effect on the structure of PAN-based carbon fibers10.1007/s12221-014-2480-1 ↗
41. Raman spectrum of graphite10.1063/1.1674108 ↗
42. Characterization of diamond films by Raman spectroscopy10.1557/JMR.1989.0385 ↗
43. Fracture toughness and failure mechanism of graphene based epoxy composites10.1016/j.compscitech.2014.03.014 ↗
44. Structure–property relationships in thermally-annealed multi-walled carbon nanotubes10.1016/j.carbon.2013.08.061 ↗