journal article·2020-03Open access

Tuning residual metal in partially etched carbide-derived carbons for enhanced acid gas adsorption

Colton M. Moran, Robert M. Marti, Jayraj N. Joshi, Sophia E. Hayes, Krista S. Walton

Carbon· Volume 158

Abstract

Abstract An in-depth study on post-synthetic modification of residual metal in carbide-derived carbons (CDCs) from an Al4C3 starting material has been performed. Ambient temperature high humidity studies reveal the conversion of residual parent nanoparticles to poly(aluminum chloride) (PAC). Alkaline modification was employed resulting in the formation of amorphous Al(OH)3 nanoparticles within 24 h of reaction. After aging for up to 11 days, amorphous nanoparticles convert to well-crystallized α-Al(OH)3 (bayerite). Al4C3-CDCs with amorphous Al(OH)3 display significantly-enhanced interactions with SO2 and CO2 while X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance infrared (ATR-IR) spectroscopy indicated no significant change in the surface chemistry of the carbon. SO2 breakthrough results at 1000 ppm SO2 exhibit uptakes near 2 mmol g−1, displaying viability for these adsorbents in flue gas remediation applications. The results of this work provide detailed modification strategies for tuning the extent and type of residual metal embedded in the final CDC structure, along with further insights into the ramifications of oxygen functionalities and pore size distribution of CDCs for SO2 adsorption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Catalytic Processes in Materials Science · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Impact of oxygen-containing surface functional groups on activated carbon adsorption of phenols10.1021/es960474r ↗
2. Adsorption of CO2 on molecular sieves and activated carbon10.1021/ef000241s ↗
3. Comparative study of CO2 capture by carbon nanotubes, activated carbons, and zeolites10.1021/ef8000086 ↗
4. Adsorption and separation of N2/CH4/CO2/SO2 gases in disordered carbons obtained using hybrid reverse Monte Carlo simulations10.1021/acs.jpcc.7b01925 ↗
5. Adsorption of sulfur dioxide on ammonia-treated activated carbon fibers10.1016/S0008-6223(00)00300-6 ↗
6. Mechanism of SO2 removal by carbon10.1021/ef960197+ ↗
7. Adsorption characteristics of SO2 on activated carbon prepared from coconut shell with potassium hydroxide activation10.1021/es010916l ↗
8. Temperature impact on SO2 removal efficiency by ammonia gas scrubbing10.1016/S0196-8904(02)00230-3 ↗
9. Removal of SO2 by activated carbon fibers in the presence of O2 and H2O10.1016/j.carbon.2005.07.012 ↗
10. Characteristics of chemical modified activated carbons from bamboo scaffolding10.1016/S1004-9541(11)60213-9 ↗
11. The effect of the gradual thermal decomposition of surface oxygen species on the chemical and catalytic properties of oxidized activated carbon10.1016/S0008-6223(02)00188-4 ↗
12. A review on surface modification of activated carbon for carbon dioxide adsorption10.1016/j.jaap.2010.07.006 ↗
13. Contribution to the study of basic surface groups on carbons10.1016/0008-6223(87)90122-9 ↗
14. On the characterization of acidic and basic surface sites on carbons by various techniques10.1016/S0008-6223(98)00317-0 ↗
15. Chlorination of titanium carbide for the processing of nanoporous carbon: a kinetic study10.1016/j.cej.2010.02.011 ↗
16. Formation of sp3-bonded carbon upon hydrothermal treatment of SiC10.1016/0925-9635(95)00341-X ↗
17. Mesoporous carbide-derived carbon with porosity tuned for efficient adsorption of cytokines10.1016/j.biomaterials.2006.07.019 ↗
18. Porosity control in nanoporous carbide-derived carbon by oxidation in air and carbon dioxide10.1016/j.jssc.2009.04.017 ↗
19. Materials for electrochemical capacitors10.1038/nmat2297 ↗
20. Electrochemical properties of carbide-derived carbon electrodes in non-aqueous electrolytes based on different Li-salts10.1016/j.electacta.2011.05.126 ↗
21. Nanoporous carbide-derived carbon with tunable pore size10.1038/nmat957 ↗
22. Synthesis and characterization of aluminum carbide-derived carbon with residual aluminum-based nanoparticles10.1016/j.carbon.2016.11.083 ↗
23. Synthesis of embedded iron nanoparticles in Fe3C-derived carbons10.1016/j.carbon.2014.07.044 ↗
24. Effect of OH−/Al3+ ratio on the coagulation behavior and residual aluminum speciation of polyaluminum chloride (PAC) in surface water treatment10.1016/j.seppur.2011.04.007 ↗
25. Characterization and coagulation of a polyaluminum chloride (PAC) coagulant with high Al13 content
26. Pratt · 2007
27. Pratt · 2010
28. Heterogeneous uptake of sulfur dioxide on aluminum and magnesium oxide particles10.1021/jp004423z ↗
29. Carbon dioxide adsorption on oxide nanoparticle surfaces10.1016/j.cej.2010.12.041 ↗
30. Characterization, and adsorption studies of nanocrystalline aluminum oxide and a bimetallic nanocrystalline aluminum oxide/magnesium oxide10.1021/cm011590i ↗
31. Removal of phosphate by aluminum oxide hydroxide10.1016/S0021-9797(02)00008-5 ↗
32. Claus catalysis. 1. Adsorption of sulfur dioxide on the alumina catalyst studied by FTIR and EPR spectroscopy10.1021/j100249a014 ↗
33. Interactions of ammonia with the surface of microporous carbon impregnated with transition metal chlorides10.1021/jp072066n ↗
34. Impregnation of activated carbon with chromium and copper salts: effect of porosity and metal content10.1016/0008-6223(94)90111-2 ↗
35. Chemical vapour deposition: transition metal carbides go 2D10.1038/nmat4386 ↗
36. Fabrication of aluminum carbide nanowires by a nano-template reaction10.1016/j.carbon.2009.10.004 ↗
37. Evaluation of thermodynamic data for aluminum chloride hexahydrate and its dehydration10.1016/0040-6031(89)85104-4 ↗
38. Thermal decomposition of aluminum chloride hexahydrate10.1021/ie058005y ↗
39. Bench-scale decomposition of aluminum chloride hexahydrate to produce poly(aluminum chloride)10.1021/ie000029b ↗
40. Comparison of hydrolysis products of AlCl3 center dot 6H(2)O in different concentrations by electrospray ionization time of flight mass spectrometer (ESI TOF MS)10.1080/03067310600687583 ↗
41. Identification of hydrolysis products of AlCl3 center dot 6H(2)O in the presence of sulfate by electrospray ionization time-of-flight mass spectrometry and computational methods10.1039/B614814J ↗
42. Effect of SO42-/Al3+ ratio and OH−/Al3+ value on the characterization of coagulant poly-aluminum-chloride-sulfate (PACS) and its coagulation performance in water treatment10.1016/j.chemosphere.2005.03.013 ↗
43. Leygraf · 2016
44. Impact of synthesis conditions on surface chemistry and structure of carbide-derived carbons10.1016/j.tca.2009.09.002 ↗
45. Carbide-derived carbons – from porous networks to nanotubes and graphene10.1002/adfm.201002094 ↗
46. Structure and dynamics of the aluminum chlorohydrate polymer Al 13 O 4 (OH) 24 (H 2 O) 12 Cl 710.1039/b310882a ↗
47. Modeling small aluminum chlorohydrate polymers10.1021/jp0360422 ↗
48. Mechanisms of gibbsite crystallization from partially neutralized aluminum chloride solutions10.1346/CCMN.1988.0360104 ↗
49. Formation mechanism of aluminum hydroxide polymorphs10.1346/CCMN.1993.0410509 ↗
50. Studies of hydrolyzed aluminum chloride solutions. 1. Nature of aluminum species and composition of aqueous solutions10.1021/j100459a021 ↗
51. Surface modifications of carbonaceous materials for carbon dioxide adsorption: a review10.1016/j.jtice.2016.12.014 ↗
52. N-rich porous carbon with high CO2 capture capacity derived from polyamine-incorporated metal-organic framework materials10.1039/C6RA09472D ↗
53. A review on solid adsorbents for carbon dioxide capture10.1016/j.jiec.2014.09.001 ↗
54. CO2 adsorption on crab shell derived activated carbons: contribution of micropores and nitrogen-containing groups10.1039/C5RA04937G ↗
55. Chemisorption of catechol on gibbsite, boehmite, and noncrystalline alumina surfaces10.1021/es00171a014 ↗
56. Acid/base-treated activated carbons: characterization of functional groups and metal adsorptive properties10.1021/la0348463 ↗
57. On the nature of basic sites on carbon surfaces: an overview10.1016/j.carbon.2004.01.023 ↗
58. Selectivity and direct visualization of carbon dioxide and sulfur dioxide in a decorated porous host10.1038/nchem.1457 ↗
59. Characterization of surface oxygen complexes on carbon nanofibers by TPD, XPS and FT-IR10.1016/j.carbon.2006.11.019 ↗
60. Chloride ion interactions with oxide-covered aluminum leading to pitting corrosion: a review10.1149/2.1011409jes ↗
61. Discussion of “on the kinetics of the breakdown of passivity of preanodized aluminum by chloride ions” [Z. A. Foroulis and M. I. Thubrikar (pp. 1296–1301, Vol. 122, No. 10)]10.1149/1.2132949 ↗
62. Valence band x-ray photoelectron spectroscopic studies to distinguish between oxidized aluminum species10.1116/1.581779 ↗
63. Characterization of the oxide/hydroxide surface of aluminium using x-ray photoelectron spectroscopy: a procedure for curve fitting the O 1s core level10.1002/1096-9918(200007)29:7<468::AID-SIA890>3.0.CO;2-V ↗
64. Characterization and mechanisms of H2S and SO2 adsorption by activated carbon10.1021/acs.energyfuels.5b01696 ↗
65. On the nature of surface acid sites of chlorinated activated carbons10.1016/S0008-6223(02)00353-6 ↗
66. XPS studies of the oxygen 1s and 2s levels in a wide range of functional polymers10.1021/ac00059a006 ↗
67. X-ray photoelectron spectroscopy sulfur 2p study of organic thiol and disulfide binding interactions with gold surfaces10.1021/la960465w ↗
68. XPS study of basic aluminum sulphate and basic aluminium nitrate10.1016/j.matlet.2005.02.029 ↗
69. XPS Study of the Adsorption of SO2 and NH3 over Supported Tin Dioxide Catalysts Used in de-NOx Catalytic Reaction10.1021/jp0108869 ↗
70. Adsorption and desorption of SO2 on active carbon: the effect of surface basic groups10.1016/0008-6223(90)90054-3 ↗