Horizontally aligned surface segments enhancing the adhesion of carbon nanotube forests
Source abstract
Abstract
Abstract The excellent mechanical properties of carbon nanotube (CNT) and low effective modulus of its forest makes CNT forest (CNTF) promising in dry adhesives. However, the low contact efficiency of buckled nanotube segments on the surface of the CNTF weakened its adhesion strength, which is far below the theoretical value. To improve the orientation, density, and arrangement of these nanotube segments, a layer of patterned aluminum was added to the conventional catalyst. Thus, a CNTF with densely-packed, horizontally-aligned surface nanotube segments was obtained. Nanoindentation results showed that the adhesion force of this CNTF could reach up to 13.69 mN under optimized conditions, nearly 5.5 times the best results of similar works. The results of coarse-grained (CG) simulations revealed the lateral stretching of these nanotube segments induced bond energy variation made a major contribution to the superior adhesion performance. The formation mechanism of these surface nanotube segments was also thoroughly analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Nanohairs and nanotubes: efficient structural elements for gecko-inspired artificial dry adhesives10.1016/j.nantod.2009.06.004 ↗
2. Nanotubes and related nanomaterials: critical advances and challenges for synthesis toward mainstream commercial applications10.1021/acsnano.8b06511 ↗
3. Diameter control of vertically aligned carbon nanotubes using CoFe2O4 nanoparticle Langmuir-Blodgett films10.7567/JJAP.57.03EG15 ↗
4. Diameter control of single-walled carbon nanotube forests from 1.3-3.0 nm by arc plasma deposition
5. Increased carbon nanotube area density after catalyst generation from cobalt disilicide using a cyclic reactive ion etching approach10.1063/1.4870949 ↗
6. Hierarchical bioinspired adhesive surfaces-A review10.1088/1748-3190/11/5/051001 ↗
7. Cooperative adhesion and friction of compliant nanohairs10.1021/nl102398w ↗
8. Interfacial energy and strength of multiwalled-carbon-nanotube-based dry adhesive
9. Structural analysis of collapsed, and twisted and collapsed, multiwalled carbon nanotubes by atomic force microscopy10.1103/PhysRevLett.86.87 ↗
10. Critical role of gas phase diffusion and high efficiency in vertically aligned carbon nanotube forest growth10.1016/j.carbon.2013.04.007 ↗
11. Highly anisotropic adhesive film made from upside-down, flat, and uniform vertically aligned CNTs10.1021/acsami.6b10395 ↗
12. Real-time imaging of self-organization and mechanical competition in carbon nanotube forest growth10.1021/acsnano.6b07251 ↗
13. Alignment control of carbon nanotube forest from random to nearly perfectly aligned by utilizing the crowding effect10.1021/nn300142j ↗
14. Effects of surface morphology, size effect and wettability on interfacial adhesion of carbon nanotube arrays10.1016/j.tsf.2013.07.047 ↗
15. Influence of packing density and surface roughness of vertically-aligned carbon nanotubes on adhesive properties of gecko-inspired mimetics10.1021/am507822b ↗
16. Gecko-foot-mimetic aligned single-walled carbon nanotube dry adhesives with unique electrical and thermal properties10.1002/adma.200700023 ↗
17. Geckolike high shear strength by carbon nanotube fiber adhesives10.1063/1.3050450 ↗
18. Carbon nanotube dry adhesives with temperature-enhanced adhesion over a large temperature range10.1038/ncomms13450 ↗
19. Bio-inspired hierarchical polymer fiber-carbon nanotube adhesives10.1002/adma.201304601 ↗
20. Synthetic gecko foot-hairs from multiwalled carbon nanotubes10.1039/b506047h ↗
21. E-beam photoresist and carbon nanotubes as biomimetic dry adhesives10.1109/MEMSYS.2006.1627952 ↗
22. Carbon nanotube arrays with strong shear binding-on and easy normal lifting-off10.1126/science.1159503 ↗
23. Carbon nanotube-based synthetic gecko tapes10.1073/pnas.0703505104 ↗
24. Adhesive properties of gecko-inspired mimetic via micropatterned carbon nanotube forests10.1021/jp304650s ↗
25. Novel nonlinear coarse-grained potentials of carbon nanotubes10.1016/j.jmps.2019.03.023 ↗
26. Efficient growth of vertically-aligned single-walled carbon nanotubes with combining two unfavorable synthesis conditions10.1016/j.carbon.2019.01.109 ↗
27. Systematic periodicity in waviness of vertically aligned carbon nanotubes explained by helical buckling10.1088/1361-6528/aa7f6a ↗
28. Higher recovery and better energy dissipation at faster strain rates in carbon nanotube bundles: an in-situ study10.1021/nn300376j ↗
29. The coordinated buckling of carbon nanotube turfs under uniform compression10.1088/0957-4484/19/17/175704 ↗
30. Length dependent foam-like mechanical response of axially indented vertically oriented carbon nanotube arrays10.1016/j.carbon.2010.09.034 ↗
31. Effect of hydrogen concentration on the growth of carbon nanotube arrays for gecko-inspired adhesive applications10.3390/coatings7120221 ↗
32. Analysis of carbon nanotube Arrays for their potential use as adhesives under harsh conditions as in space technology10.1007/s11249-018-1121-z ↗
33. Adhesion properties of carbon nanotube arrays for an adhesive foot of a space crawling robot10.1088/1361-665X/ab5ad4 ↗
34. Adhesion, friction and wear on the nanoscale of MWNT tips and SWNT and MWNT arrays10.1088/0957-4484/19/12/125702 ↗
35. Synthetic gecko foot-hairs from multiwalled carbon nanotubes10.1039/b506047h ↗