journal article·2019-11

Direct growth of flexible carbon nanotube interconnects during polymer-ceramic conversion reaction for release of thermal stress

Jiahong Niu, Songhe Meng, Fajun Yi, Hua Jin, Jinping Li, Yaoqiang Zhou

Carbon· Volume 153
Publisher page

Abstract

Abstract Polymer-derived ceramics, which are a class of emerging ultrahigh-temperature semiconductor materials, face challenges when it comes to the semiconductor–metal interconnects. High thermal stress produced at the semiconductor–metal interface during ultrahigh-temperature applications (>1000 °C), owing to the mismatch in the coefficients of thermal expansion of the two materials, can readily lead to the mechanical failure of the semiconductor–metal interconnection. Herein, flexible carbon nanotube (CNT) interconnects were formed from Ni alloy (Ni95AlSiMn) wires to the SiCN semiconductor through the direct growth of CNT on the Ni alloy wires during the synthesis of SiCN itself by a polymer-ceramic conversion reaction. The catalytic Ni nanoparticles and the gaseous carbon sources needed for the growth of CNT were generated during the polymer-ceramic conversion reaction. Flexible CNT interconnects exhibited outstanding electrical characteristics and excellent interfacial strength. Further, the temperature dependence of the resistance of SiCN could be measured at temperatures of up to 1000 °C without significant mechanical failure or a decrease in the interfacial strength because the thermal stress was readily released by the flexible CNT interconnects. Thus, the fabricated CNT interconnects with excellent electrical, thermal, and thermo mechanical properties are highly suited for various ultrahigh-temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Carbon Nanotubes in Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Highly conductive, flexible, polyurethane-based adhesives for flexible and printed electronics10.1002/adfm.201202249 ↗
2. Low temperature synthesis of vertically aligned carbon nanotubes with electrical contact to metallic substrates enabled by thermal decomposition of the carbon feedstock10.1021/nl900675d ↗
3. Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates10.1038/nature07110 ↗
4. Three-dimensional SiCN ceramic microstructures via nano-stereolithography of inorganic polymer photoresists10.1002/adfm.200600009 ↗
5. Additive manufacturing of polymer-derived ceramics10.1126/science.aad2688 ↗
6. Synthesis of dense silicon-based ceramics at low temperatures10.1038/355714a0 ↗
7. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics10.1111/j.1551-2916.2010.03876.x ↗
8. Nanostructure and energetics of carbon-rich SiCN ceramics derived from polysilylcarbodiimides: role of the nanodomain interfaces10.1021/cm2038238 ↗
9. Ultrahigh-temperature semiconductors made from polymer-derived ceramics10.1111/j.1551-2916.2010.03623.x ↗
10. Piezoresistive effect in SiOC ceramics for integrated pressure sensors10.1111/j.1551-2916.2009.03496.x ↗
11. A Silicon carbonitride ceramic with anomalously high piezoresistivity10.1111/j.1551-2916.2008.02275.x ↗
12. Fabrication and electrical properties of polymer-derived ceramic (PDC) thin films for high-temperature heat flux sensors10.1016/j.sna.2010.11.013 ↗
13. A silicoboron carbonitride ceramic stable to 2000 °C10.1038/382796a0 ↗
14. Silicoaluminum carbonitride with anomalously high resistance to oxidation and hot corrosion10.1002/adem.200400010 ↗
15. Carbon-nanotube-reinforced polymer-derived ceramic composites10.1002/adma.200306241 ↗
16. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
17. Low-temperature sintered nanoscale silver as a novel semiconductor device-metallized substrate interconnect material10.1109/TCAPT.2005.853167 ↗
18. The thermal expansion of pure metals: copper, gold, aluminum, nickel, and iron10.1103/PhysRev.60.597 ↗
19. The thermal expansion of pure metals. II: molybdenum, palladium, silver, tantalum, tungsten, platinum, and lead10.1103/PhysRev.61.74 ↗
20. Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes10.1038/nmat1782 ↗
21. Flexible high-conductivity carbon-nanotube interconnects made by rolling and printing10.1002/smll.200900741 ↗
22. Flexible high-performance carbon nanotube integrated circuits10.1038/nnano.2011.1 ↗
23. Highly flexible and stretchable carbon nanotube network electrodes prepared by simple brush painting for cost-effective flexible organic solar cells10.1016/j.carbon.2013.09.035 ↗
24. Effect of nanotube functionalization on the coefficient of thermal expansion of nanocomposites10.1002/adfm.200600760 ↗
25. Shaping carbon nanotubes and the effects on their electrical and mechanical properties10.1002/adfm.200500706 ↗
26. Direct growth of aligned carbon nanotubes on bulk metals10.1038/nnano.2006.56 ↗
27. Direct growth of flexible carbon nanotube electrodes10.1002/adma.200701146 ↗
28. Maskless direct growth of carbon nanotube micropatterns on metallic substrates10.1016/j.carbon.2018.08.047 ↗
29. High quality carbon nanotubes on conductive substrates grown at low temperatures10.1002/adfm.201501214 ↗
30. Ultrafast transfer of metal-enhanced carbon nanotubes at low temperature for large-scale electronics assembly10.1002/adma.201002415 ↗
31. Spinnable carbon nanotube forests grown on thin, flexible metallic substrates10.1016/j.carbon.2010.06.016 ↗
32. Vertically aligned carbon nanotube electrodes directly grown on a glassy carbon electrode10.1021/nn2017815 ↗
33. Indirect involvement of amorphous carbon layer on convective heat transfer enhancement using carbon nanofibers10.1115/1.4030218 ↗
34. Carbon nanotube/carbon nanofiber growth from industrial by-product gases on low- and high-alloy steels10.1016/j.carbon.2012.05.064 ↗
35. The production of a homogeneous and well-attached layer of carbon nanofibers on metal foils10.1016/j.carbon.2010.04.018 ↗
36. Wet-etched Ni foils as active catalysts towards carbon nanofiber growth10.1016/j.carbon.2010.04.016 ↗
37. How carbon-nano-fibers attach to Ni foam10.1016/j.carbon.2008.07.002 ↗
38. Influence of hydrogen on the formation of a thin layer of carbon nanofibers on Ni foam10.1016/j.carbon.2009.07.025 ↗
39. Temperature sensor made of polymer-derived ceramics for high-temperature applications10.1016/j.sna.2014.08.012 ↗
40. Mechanical properties of a fully dense polymer derived ceramic made by a novel pressure casting process10.1016/S1359-6454(02)00206-9 ↗
41. Efficient and stable bifunctional electrocatalysts Ni/NixMy (M = P, S) for overall water splitting10.1002/adfm.201505626 ↗
42. Synthesis, pyrolysis of a novel liquid SiBCN ceramic precursor and its application in ceramic matrix composites10.1016/j.jeurceramsoc.2016.11.009 ↗
43. Catalytic formation of carbon phases in metal modified, porous polymer derived SiCN ceramics10.1016/j.carbon.2011.03.027 ↗
44. Synthesis of tall carpets of vertically aligned carbon nanotubes by in situ generation of water vapor through preheating of added oxygen10.1016/j.carbon.2012.04.043 ↗
45. Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes10.1126/science.1104962 ↗
46. Nitrogen-induced catalyst restructuring for epitaxial growth of multiwalled carbon nanotubes10.1021/nn301517g ↗
47. Carbon nanofibers as electrocatalyst support for fuel cells: effect of hydrogen on their properties in CH4 decomposition10.1016/j.jpowsour.2008.11.092 ↗
48. Growth of filamentous carbon by decomposition of ethanol on nickel foam: influence of synthesis conditions and catalytic nanoparticles on growth yield and mechanism10.1016/j.jcat.2008.10.006 ↗
49. Mechanistic aspects of the formation of carbon-nanofibers on the surface of Ni foam: a new microstructured catalyst support10.1016/j.jcat.2006.02.021 ↗
50. Catalyst-free growth of carbon nanotube arrays directly on Inconel® substrates for electrochemical carbon-based electrodes10.1039/C5TA03734D ↗
51. Immobilization of a layer of carbon nanofibres (CNFs) on Ni foam: a new structured catalyst support10.1039/b416977h ↗
52. Carbon nanotube growth mechanism switches from tip- to base-growth with decreasing catalyst particle size10.1016/j.carbon.2008.05.016 ↗
53. Highly transmissive carbon nanotube forests grown at low substrate temperature10.1002/adfm.201300400 ↗
54. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
55. 99.9% purity multi-walled carbon nanotubes by vacuum high-temperature annealing10.1016/S0008-6223(03)00330-0 ↗
56. Tire waste derived turbostratic carbon as an electrode for a vanadium redox flow battery10.1021/acssuschemeng.8b00113 ↗
57. Development of nickel wire bonding for high-temperature packaging of SiC devices10.1109/TADVP.2009.2015593 ↗