journal article·2024-06Open access

Carbon nanocone mechanical behavior and their use as AFM tips for the characterization of polymers in Peak Force mode

G. Paredes, C. Villeneuve-Faure, M. Monthioux

Carbon· Volume 226

Abstract

Compared to carbon nanotube-based Atomic Force Microscopy probes, carbon nanocone-based probes appear as promising candidates for investigating topography and mechanical properties thanks to the reduced number of artefacts. In this paper, we intend to investigate some of the mechanical features of carbon nanocone (CnC) tips and to evaluate their performances as probes for investigating the mechanical properties of polymer films and composites. Using their force distance curve, the cantilever/CnC spring constant of several CnC probes is determined and the related bending force for each cone is extracted. The results demonstrate CnC bending forces ranging from 100 nN up to 3 μN, which is up to 2 orders of magnitude higher than values reported in the literature for carbon nanotubes. Moreover, the bending phenomenon occurred only when the CnC axis was not strictly perpendicular to the substrate surface. Using Peak-Force Quantitative NanoMechanical (PF-QNM) mode, we demonstrate that CnC probes are suitable to accurately probe polymer mechanical properties, provided the same targeted deformation is used for both the calibration and PF-QNM measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Carbon Nanotubes in Composites · Mechanical and Optical Resonators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Nanotubes as nanoprobes in scanning probe microscopy10.1038/384147a0 ↗
2. Fabrication and characterization of diamond AFM probe integrated with PZT thin film sensor and actuator10.1016/j.sna.2003.11.025 ↗
3. Carbon nanotubes as SPM tips: mechanical properties of nanotube tips and imaging
4. Carbon nanotube tips for scanning probe microscopy
5. Carbon nanotube tips for scanning probe microscopy: fabrication and high aspect ratio nanometrology10.1088/0957-0233/16/11/003 ↗
6. New carbon nanotube AFM probe technology10.1016/S1369-7021(09)70276-7 ↗
7. The attachment of carbon nanotubes to atomic force microscopy tips using the pick-up method10.3390/app10165575 ↗
8. Advancement in fabrication of carbon nanotube tip for atomic force microscope using multi-axis nanomanipulator in scanning electron microscope
9. Evaluation of carbon nanotube probes in critical dimension atomic force microscopes
10. Accurate thickness measurement of graphene10.1088/0957-4484/27/12/125704 ↗
11. Single-walled carbon nanotube AFM probes: optimal imaging resolution of nanoclusters and biomolecules in ambient and fluid environments10.1021/nl048986o ↗
12. Using carbon nanotube probes for high-resolution three-dimensional imaging of cells10.1016/j.ultramic.2011.01.030 ↗
13. Carbon nanotube tips for atomic force microscopy10.1038/nnano.2009.154 ↗
14. Efficient attachment of carbon nanotubes to conventional and high-frequency AFM probes enhanced by electron beam processes10.1088/0957-4484/24/23/235705 ↗
15. Solution-based methods for the fabrication of carbon nanotube-modified atomic force microscopy probes10.3390/nano7110346 ↗
16. Advances in assembled micro- and nanoscale mechanical contact probes10.3389/fmech.2022.983334 ↗
17. Wear-resistance comparison of carbon nanotubes and conventional silicon-probes for atomic force microscopy10.1016/j.wear.2004.12.046 ↗
18. Carbon nanotube modified probes for stable and high sensitivity conductive atomic force microscopy10.1088/0957-4484/27/47/475708 ↗
19. Electrical characteristics of a carbon nanotube-functionalized probe for Kelvin probe force microscopy10.1021/acs.jpcc.0c08640 ↗
20. Imaging artefects in atomic force microscopy with carbon nanotube tips10.1088/0957-4484/16/11/003 ↗
21. Identification of multiple oscillation states of carbon nanotube tipped cantilevers interacting with surfaces in dynamic atomic force microscopy10.1103/PhysRevB.80.224105 ↗
22. Carbon nanotube tip probes: stability and lateral resolution in scanning probe microscopy and application to surface science in semiconductors10.1088/0957-4484/12/3/326 ↗
23. Nonlinear tapping dynamics of multi-walled carbon nanotube tipped atomic force microcantilevers10.1088/0957-4484/15/5/002 ↗
24. Using carbon nanotube cantilevers in scanning probe metrology
25. A study of the mechanical properties of a carbon nanotube probe with a high aspect ratio10.1088/1361-6528/ab6239 ↗
26. Mechanisms of single-walled carbon nanotube probe-sample multistability in tapping mode AFM imaging10.1021/jp051363u ↗
27. Competition of elastic and adhesive properties of carbon nanotubes anchored to atomic force microscopy tips10.1088/0957-4484/19/03/035709 ↗
28. Length adjustment of carbon nanotube probe by electron bombardment10.1143/JJAP.41.4887 ↗
29. Molecular dynamics simulations of bending behavior of tubular graphite cones10.1063/1.1787894 ↗
30. Improved application of carbon nanotube atomic force microscopy probes using Peak Force Tapping mode10.3390/nano8100807 ↗
31. Amplitude response of conical multiwalled carbon nanotube probes for atomic force microscopy
32. Synthesis and (some) applications of carbon-nanotube-supported pyrolytic carbon nanocones
33. New probes based on carbon nano-cones for scanning probe microscopies10.1016/j.ultramic.2022.113667 ↗
34. The synthesis of conical carbon
35. Shaping carbon nanostructures by controlling the synthesis process10.1063/1.1395517 ↗
36. Sharpening of carbon nanocone tips during plasma-enhanced chemical vapor growth10.1016/S0009-2614(01)01312-4 ↗
37. Describing carbons10.1016/j.cartre.2024.100325 ↗
38. Extremely sharp carbon nanocone probes for atomic force microscopy imaging
39. Chemical vapour deposition of pyrolytic carbon on carbon nanotubes. Part 1: synthesis and morphology10.1016/S0008-6223(03)00329-4 ↗
40. Chemical vapor deposition of pyrolytic carbon on carbon nanotubes. Part 2. Texture and structure10.1016/j.carbon.2004.12.023 ↗
41. Texture, nanotexture, and structure of carbon nanotube-supported carbon cones10.1021/acsnano.2c01825 ↗
42. Theory of carbon nanocones: mechanical chiral inversion of a micron-scale three-dimensional object10.1103/PhysRevLett.93.255504 ↗
43. Carbon nanocones under compression: buckling and post-buckling behaviors10.1103/PhysRevB.75.195435 ↗
44. A molecular dynamics study of the nucleation, thermal stability and nanomechanics of carbon nanocones10.1088/0957-4484/18/10/105702 ↗
45. Tensile and compressive behaviors of open-tip carbon nanocones under axial strains10.1557/jmr.2011.160 ↗
46. Mechanical properties of carbon nanocones10.1063/1.2813017 ↗
47. Free transverse vibration of single-walled carbon nanocones10.1016/j.carbon.2012.04.072 ↗
48. Assessment of the resonance frequency of cantilever carbon nanocones using molecular dynamics simulation10.1063/1.4705423 ↗
49. A higher-order gradient theory for modeling of the vibration behavior of single-wall carbon nanocones10.1016/j.apm.2013.11.010 ↗
50. Three-dimensional modal analysis of carbon nanocones using molecular dynamics simulation10.1116/1.4929440 ↗
51. Instabilities in carbon nanocone stacks10.1016/j.carbon.2017.11.023 ↗
52. Elastic and failure properties of carbon nanocones using molecular dynamics simulation10.1080/1536383X.2018.1500462 ↗
53. Puech · 2019 · vol. 5 · 69
54. Asymptotic modeling of nonlinear bending and buckling behavior of carbon nanotubes
55. Force measurements with the atomic force microscope: technique, interpretation and applications10.1016/j.surfrep.2005.08.003 ↗
56. Nano-scale characterization of insulator-semicon contacts
57. Nanoscale mechanical and electrical characterization of the interphase in polyimide/silicon nitride nanocomposites10.1088/1361-6528/ac13ea ↗
58. Cross Kelvin force microscopy and conductive atomic force microscopy studies of organic bulk heterojunction blends for local morphology and electrical behavior analysis10.1063/1.4907213 ↗
59. The use of the Peak Force quantitative nanomechanical mapping AFM-based method for high-resolution Young's modulus measurement of polymers10.1088/0957-0233/22/12/125703 ↗
60. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
61. Elastic constants of tetrahedral amorphous carbon films by surface Brillouin scattering10.1063/1.124863 ↗
62. Mechanical measurements of ultra-thin amorphous carbon membranes using scanning atomic force microscopy10.1016/j.carbon.2012.01.037 ↗
63. A molecular dynamics study of Young's modulus of multilayer graphene10.1063/1.5091753 ↗
64. On Young's modulus of multi-walled carbon nanotubes10.1007/s12034-008-0032-2 ↗
65. Structural and elastic properties of amorphous carbon from simulated quenching at low rates10.1088/1361-651X/ab45da ↗
66. Atomistic studies of mechanical properties of graphene10.3390/polym6092404 ↗
67. On the measurements of rigidity modulus of soft materials in nanoindentation experiments at small depth10.1021/ma202600b ↗