journal article·2025-03Open access

Enhanced O2 selectivity of carbon molecular sieves by electrochemical oxidation for air separation

Koki Urita, Takashi Ishida, Kaito Marubayashi, Hideki Tanaka, Miyu Hamasaki, Yasuyuki Yamane, Jin Miyawaki, Hiroo Notohara, Isamu Moriguchi

Carbon· Volume 235

Abstract

We propose a novel method for synthesizing carbon molecular sieves (CMS) with enhanced performance for O 2 separation from air using flow-type electrochemical oxidation (F-ECO). The F-ECO process introduces oxygen-containing functional groups (OCFGs) at pore entrances of activated carbon (AC), creating an ultrathin layer that works as an energy barrier for improving O 2 selectivity. The parameters for the F-ECO process were optimized using an experimental design method. The microstructure and surface species of the F-ECO-treated AC samples were characterized using X-ray photoelectron spectroscopy and gas adsorption measurements. The F-ECO treatment slightly reduced micropore volume but dramatically increased the O 2 dynamic selection coefficient of AC, indicating improved N 2 /O 2 separation. The optimal F-ECO conditions produced a CMS with O 2 selectivity comparable to the CMS provided by conventional methods in industry, along with a faster O 2 adsorption rate while minimizing the decrease in effective O 2 adsorbed amount. This performance was achieved by carefully controlling the surface oxidation proposed by the experimental design method based on Bayesian optimization. The results demonstrate the potential of this approach for developing energy-efficient O 2 enrichment technologies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Atomized air of oxygen-enriched combustion for a 450 000 kcal/h industrial furnace10.1021/acs.energyfuels.5b00233 ↗
2. Study of the post-combustion CO2 capture process by absorption-regeneration using amine solvents applied to cement plant flue gases with high CO2 contents10.1016/j.ijggc.2019.102799 ↗
3. Typical case of carbon capture and utilization in Chinese iron and steel enterprises: CO2 emission analysis10.1016/j.jclepro.2022.132528 ↗
4. Rice straw and rice husks as energy sources-comparison of direct combustion and biogas production10.1007/s13399-018-0321-y ↗
5. A review of air separation technologies and their integration with energy conversion processes10.1016/S0378-3820(01)00131-X ↗
6. Research progress and materials selection guidelines on mixed conducting perovskite-type ceramic membranes for oxygen production10.1039/c1ra00419k ↗
7. Numerical simulation of a pressure swing adsorption oxygen unit10.1016/0009-2509(89)85090-0 ↗
8. Production of oxygen enriched air by rapid pressure swing adsorption10.1007/BF00707354 ↗
9. Dynamics of high purity oxygen PSA10.1016/0950-4214(95)00022-4 ↗
10. Adsorption of CO2, N2, and O2 on natural zeolites10.1021/ef020135l ↗
11. Contamination of zeolites used in oxygen production by PSA: effects of water and carbon dioxide10.1021/ie800024c ↗
12. Evaluating metal-organic frameworks for post-combustion carbon dioxide capture via temperature swing adsorption10.1039/c1ee01720a ↗
13. Carbon capture by physical adsorption: materials, experimental investigations and numerical modeling and simulations – a review10.1016/j.apenergy.2015.10.011 ↗
14. Study of adsorption properties of zeolites NaX, CaA, and CaNaA in separation of air components10.1134/S0965544120080149 ↗
15. Zeolites in adsorption processes: state of the art and future prospects10.1021/acs.chemrev.2c00140 ↗
16. Temperature swing adsorption device for oxygen-enriched air10.1016/j.jclepro.2014.04.024 ↗
17. Zeolite–carbon composites prepared from industrial wastes: (I) Effects of processing parameters10.1016/j.msea.2005.04.008 ↗
18. Carbon molecular sieves for the concentration of oxygen from air10.1016/0016-2361(75)90006-X ↗
19. Carbon molecular sieves for gas separation processes10.1016/0950-4214(93)80025-R ↗
20. Air separation by carbon molecular sieves10.1023/A:1020486502889 ↗
21. Adsorption equilibria and kinetics of CO2, CO, and N2 on carbon molecular sieve10.1016/j.seppur.2018.11.069 ↗
22. Separation of CO2/CH4 using carbon molecular sieve (CMS) at low and high pressure10.1016/j.ces.2017.01.071 ↗
23. In silico synthesis of carbon molecular sieves for high-performance air separation10.1016/j.carbon.2018.10.021 ↗
24. Adsorption and diffusion of nitrogen and oxygen in a carbon molecular sieve10.1016/0009-2509(86)87105-6 ↗
25. High–performance carbon molecular sieves for the separation of propylene and propane10.1021/acsami.1c21305 ↗
26. Air separation with graphene mediated by nanowindow-rim concerted motion10.1038/s41467-018-04224-6 ↗
27. Electrochemical oxidation of carbon fibres in aqueous solutions and analysis of the surface oxides10.1007/BF01008872 ↗
28. Modification of the surface chemistry of activated carbons10.1016/S0008-6223(98)00333-9 ↗
29. Surface characterization of electrochemically oxidized carbon fibers10.1016/S0008-6223(99)00047-0 ↗
30. Effect of electrochemical treatments on the surface chemistry of activated carbon10.1016/j.carbon.2008.12.022 ↗
31. Electrochemical oxidation of highly oriented pyrolytic graphite during potential cycling in sulfuric acid solution10.1016/j.jpowsour.2008.07.086 ↗
32. Electrochemical oxidation of highly oriented pyrolytic graphite in sulphuric acid solution under potential pulse condition10.1002/fuce.200800077 ↗
33. The electrochemical flow capacitor: a new concept for rapid energy storage and recovery10.1002/aenm.201100768 ↗
34. Capacitive deionization concept based on suspension electrodes without ion exchange membranes10.1016/j.elecom.2014.03.003 ↗
35. Adaptive design of experiments based on Gaussian mixture regression
36. Irradiation effects in carbon nanostructures10.1088/0034-4885/62/8/201 ↗
37. HR-TEM study of atomic defects in carbon nanostructures10.1063/1.2103831 ↗
38. High-resolution X-ray photoemission spectrum of the valence bands of gold10.1103/PhysRevB.5.4709 ↗
39. Why does the linear driving force model for adsorption kinetics work?10.1023/A:1008965317983 ↗
40. Defect-induced atomic migration in carbon nanopeapod: tracking the single-atom dynamic behavior10.1021/nl048416o ↗
41. Defects in hard carbon: where are they located and how does the location affect alkaline metal storage?10.1002/smll.202007652 ↗
42. Direct evidence on C-C single bonding in single-wall carbon nanohorn aggregates10.1021/jp071273k ↗
43. Electrochemical surface oxidation of carbon nanofibers10.1016/j.carbon.2010.08.047 ↗