journal article·1998-07

The Effect of Talc on Cell Nucleation in Extrusion Foam Processing of Polypropylene with CO2 and Isopentane

Chul B. Park, Lewis K. Cheung, Seung-Won Song

Cellular Polymers· Volume 17· Issue 4
Publisher page

Abstract

The effect of talc on cell nucleation of polypropylene (PP) foam was investigated. Branched high-melt-strength PP was used to reduce bubble coalescence during extrusion foam processing. When isopentane was used as a blowing agent, bubble nucleation was dominated by the talc concentration, and the isopentane content did not affect the cell density very much. By contrast, when CO2 was used as a blowing agent, both talc and CO2 concentrations determined the cell-population density. However, the effect of talc on nucleation was significant only when the CO2 content was low. In addition, the maximum achievable cell density was not improved by talc when CO2 was used whereas the maximum cell density was dramatically improved by talc when isopentane was used. The experimental results indicate that the heterogeneous bubble nucleation mechanisms in plastic foam processing with CO2 are fundamentally different from those in the processing with a long-chain blowing agent such as isopentane.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Foaming and Composites · Phase Equilibria and Thermodynamics · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Industrial Engineering University of Toronto Toronto, Ontario, Canada M5S 3G8

References (32)

Show source-provided references
1. Seeler K.A. · and Kumar V · 1993 · 12 · 359
2. 2. Collias D.I., Baird D.G. and Borggreve R.J.M., Polymer, 25, (1994), 397810.1016/0032-3861(94)90283-6 ↗
3. 10.1002/pen.76035140710.1002/pen.760351407 ↗
4. 10.1002/pen.76035140810.1002/pen.760351408 ↗
5. 10.1002/pen.1028910.1002/pen.10289 ↗
6. 10.1177/026248931998170100210.1177/0262489319981701002 ↗
7. 7. Klempner D. and Frisch K.C., Handbook of Polymeric Foams and Foam Technology, Hanser, New York (1991)
8. Yang H.H. · and Han C · 1984 · 29 · 4465
9. 10.1002/app.1976.07020061510.1002/app.1976.070200615 ↗
10. 10. Alteepping J. and Nebe J.P., U.S. Patent, 4,940,736 (1990)
11. 10.1002/pen.1064510.1002/pen.10645 ↗
12. Lee S.T. · and Ramesh N · 1996 · 15 · 297
13. 10.1002/pen.76034220610.1002/pen.760342206 ↗
14. 10.1002/pen.76034220710.1002/pen.760342207 ↗
15. Ma C.Y. · and Han C · 1983 · 28 · 2983
16. Han C.D. · and Ma C · 1983 · 28 · 2961
17. Jacob C. · and Dey S · 1995 · 31 · 38
18. 10.1002/pen.76033070710.1002/pen.760330707 ↗
19. 19. Myers D.W. and O'Brien D., U.S. Patent, 4,657,715 (1987)
20. Colton J.S. · and Suh N · 1987 · 27 · 500
21. Colton J.S. · and Suh N · 1987 · 27 · 485
22. Colton J.S. · and Suh N · 1987 · 27 · 493
23. 23. Cheung K.K., M.A.Sc. Thesis, University of Toronto (1996)
24. 24. Bradley M.B., Phillips E.M., SPE ANTEC Tech. Papers. 36, (1990), 717
25. 25. Park J.J., Katz L., Gaylord N.G., U.S. Patent, 5,116,881(1992)
26. 26.Panzer, U., SPO 98, Houston, Texas (1998).
27. 27.Behravesh, A.H., Park. C.B., and Cheung. L.K., J. of Vinyl and Additive Technology, 3, (1997), 265
28. Park C.B. · and Suh N · 1996 · 36 · 34
29. 10.1002/pen.76035050910.1002/pen.760350509 ↗
30. Park C.B. · and Cheung L · 1997 · 37 · 1
31. Park C.B. · Cellular and Microcellular Materials · 1994 · 53 · 109
32. 10.1002/pen.1175810.1002/pen.11758 ↗