journal article·2025-11

An overview of polymer foam technologies with a focus on polylactic acid, polypropylene, and polyamide 6-based materials

Sibel Tuna, Meral Akkoyun Kurtlu

Cellular Polymers· Volume 44· Issue 3-6
Publisher page

Abstract

Polymer-based composite materials are widely used in a number of engineering applications owing to their light weight, mechanical strength, chemical resistance and versatility in design. Using these materials in foam form offers several additional advantages, including reduced density, improved heat and sound insulation, and increased impact resistance. In the contemporary era, intensive research is being conducted into the evaluation of petrochemical-based polymers, such as polypropylene (PP) and polyamide 6 (PA6), and biopolymers, particularly polylactic acid (PLA), in foamed composite structures. Furthermore, hybrid systems formed by the combination of these different polymer types offer great potential for balancing environmental sustainability and performance. This review discusses the general structure, foam formation mechanisms, production techniques and basic properties of polymer-based foam composite materials. Prominent polymer-based systems, such as PP, PA6 and PLA, were examined comparatively. Additionally, contemporary methodologies concerning hybrid foam systems formed by PLA with PP and PA6, as presented in the existing literature, were evaluated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Foaming and Composites · biodegradable polymer synthesis and properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Bursa Technical University

References (100+)

Show source-provided references
1. 10.1007/978-981-10-5696-3_110.1007/978-981-10-5696-3_1 ↗
2. 10.1016/B978-1-78242-325-6.00001-310.1016/B978-1-78242-325-6.00001-3 ↗
3. 10.1016/j.compstruct.2021.11364010.1016/j.compstruct.2021.113640 ↗
4. 10.1142/S175882511850050310.1142/S1758825118500503 ↗
5. Lee S-T, Scholz DPK. Polymeric foams: technology and developments in regulation, process, and products. CRC Press, 2009.
6. Gum WF, Riese W. Reaction polymers: polyurethanes, epoxies, unsaturated polyesters, phenolics, special monomers, and additives: chemistry, technology, applications, markets. Hanser Publishers, 1992.
7. Beltrán AA, Boyacá LA. Production of rigid polyurethane foams from soy-based polyols. Lat Am Appl Res 2011; 41: 75–80.
8. Grünbauer HJM, Bicerano J, Clavel P, et al. Rigid polyurethane foams. Polymer Foams. CRC Press, 2004, pp. 253–310.
9. 10.1002/pen.1163910.1002/pen.11639 ↗
10. Dämmstoffe im Hochbau (Insulation Materials in Buildings) Information for builders architects and engineers wirschaftsministerium Baden-Würtenberg. 1999.
11. Steildachdämmung mit Polyurethan-Hartschaumstoff (Pitched Roof Insulation with Rigid Polyurethane Foam) IVPU. 1995.
12. European thermal insulation markets: the current and future prospects for polyurethane UTECH 2000 (urethanes technology) Crain Communications Ltd. 2000.
13. 10.1016/j.progpolymsci.2014.04.00110.1016/j.progpolymsci.2014.04.001 ↗
14. Yetgin SH, Ünal H. Polimer esaslı köpük malzemeler. Dumlupınar Üniversitesi Fen Bilim Enstitüsü Derg 2008; 17: 117–128.
15. Saçak M. Polimer Kimyası Ankara üniversitesi Fen Fakültesi Gazi Kitabevi 7.
16. 10.1016/j.compscitech.2005.06.01610.1016/j.compscitech.2005.06.016 ↗
17. 10.1016/j.radphyschem.2007.02.08910.1016/j.radphyschem.2007.02.089 ↗
18. Ebnesajjad S. Fluoroplastics: the definitive user’s guide and databook. Melt processible fluoroplastics. Plastics Design Library, 2003.
19. 10.1016/j.progpolymsci.2010.12.00410.1016/j.progpolymsci.2010.12.004 ↗
20. Pop-Iliev R. Processing of fine-cell polypropylene foams in compounding-based rotational foam molding. MSc thesis Department of Mechanical and Industrial Engineering University of Toronto Toronto Canada 1999.
21. 10.1016/j.supflu.2006.09.00710.1016/j.supflu.2006.09.007 ↗
22. 10.3390/polym1509205610.3390/polym15092056 ↗
23. 10.1021/acsomega.2c0628510.1021/acsomega.2c06285 ↗
24. 10.3390/polym1504086010.3390/polym15040860 ↗
25. 10.3390/molecules2515340810.3390/molecules25153408 ↗
26. Ravenstijn JTJ. The state-of-the-art on bioplastics: products, markets, trends, and technologies. Ravenstijn, 2010.
27. 10.1021/acs.iecr.5b0088210.1021/acs.iecr.5b00882 ↗
28. Niaounakis M. Biopolymers: processing and products. William Andrew, 2014.
29. Thomas S, Grohens Y, Jyotishkumar P. Characterization of polymer blends: miscibility, morphology and interfaces. John Wiley & Sons, 2015.
30. 10.1016/S0079-6700(97)00054-310.1016/S0079-6700(97)00054-3 ↗
31. Wypych G. Handbook of foaming and blowing agents, second edition. Elsevier, 2022.
32. 10.1080/03602559.2016.123328010.1080/03602559.2016.1233280 ↗
33. 10.1002/adem.20150038710.1002/adem.201500387 ↗
34. 10.1016/0032-3861(93)90758-310.1016/0032-3861(93)90758-3 ↗
35. Gnanavel G, Kanagamadhuran H, Prabhu N, et al. Review on manufacturing of cellular polymers and its applications. J Polym Text Eng 2019; 6: 9–22.
36. Eaves D. Polymer foams trends in use and technology - rapra industry analysis report series. Rapra Technology Limited Shawbury, 2001.
37. Nofar M Park CB. Introduction to plastic foams and their foaming. Polylactide Foams. 2018 pp. 1–16.10.1016/B978-0-12-813991-2.00001-9 ↗
38. Crank J, Park GS. Diffusion in polymers. Academic Press, 1968, pp. 3–9.
39. 10.1002/pen.76027070310.1002/pen.760270703 ↗
40. 10.1016/j.ces.2009.07.02510.1016/j.ces.2009.07.025 ↗
41. 10.1002/pen.76024130610.1002/pen.760241306 ↗
42. 10.1021/ie060295a10.1021/ie060295a ↗
43. 10.3390/polym1106095310.3390/polym11060953 ↗
44. Yetgin SH. Otomotiv sektörü için polimer köpük malzeme üretimi ve karakterizasyonu.
45. 10.1016/S0032-3861(02)00407-X10.1016/S0032-3861(02)00407-X ↗
46. Park HE. Effects of pressure and dissolved carbon dioxide on the rheological properties of molten polymers.
47. Suryanarayanan R. Development of low-density structural foams of nylon 6 for injection molding: influence of blowing agents, nucleating agents and processing variables. University of Massachusetts, 1997.
48. Harper CA. Modern plastics handbook. McGraw Hill Professional, 2000. https://accessengineeringlibrary.com/browse/modern-plastics-handbook#fullDetails
49. Landrock AH. Handbook of plastic foams: types, properties, manufacture and applications. Elsevier, 1995. https://www.sciencedirect.com/science/article/pii/B9780815513575500048
50. 10.1002/pen.1010210.1002/pen.10102 ↗
51. Yeung AK-F. Development of microcellular foam sheet extrusion systems. Canadian theses = Thèses canadiennes, 1998. https://hdl.handle.net/1807/15655
52. 10.1002/(SICI)1098-2329(200022)19:2<97::AID-ADV3>3.0.CO;2-B10.1002/(SICI)1098-2329(200022)19:2<97::AID-ADV3>3.0.CO;2-B ↗
53. 10.1177/0021955X0303921410.1177/0021955X03039214 ↗
54. 10.1177/0021955X0707904310.1177/0021955X07079043 ↗
55. Clariant 2026. Available from: https://www.clariant.com/en/Company/Clariant-at-a-glance/Locations#/Turkey.
56. 10.1177/073168440708254210.1177/0731684407082542 ↗
57. 10.1002/app.2168510.1002/app.21685 ↗
58. Trainer L. A study of the expansion of thermoplastic microballoons in an extruded syntactic foam. University of Massachusetts, 1989.
59. Clariant HYDROCEROL® CFA Masterbatches Cut Plastics Content in Packaging by 10%. Clariant 2019. Available from: https://www.clariant.com/en/Corporate/News/2019/09/Clariant-HYDROCEROLreg-CFA-Masterbatches-Cut-Plastics-Content-in-Packaging-by-10.10.1016/j.fos.2019.11.017 ↗
60. Yalcin B Amos SE Urquiola BM et al.Effect of processing conditions on the extent of glass bubble survival during twin screw compounding. 3M Technical Paper 2016. Available from: https://multimedia.3m.com/mws/media/800424O/3m-glass-bubbles-survivability-technical-paper.pdf
61. Ries S, Spoerrer A, Altstaedt V. Foam injection molding of thermoplastic elastomers: blowing agents, foaming process and characterization of structural foams. In: AIP conference proceedings. American Institute of Physics, 2014, pp. 401–410.
62. Akkoyun M, Badem İ, Öztoksoy ME, et al. Polypropylene/chemical blowing agent foams: effect of the injection speed and core back distance on microstructure and mechanical properties. Int J Eng Res Dev 2020; 12: 638–647.
63. 10.3390/polym1609128610.3390/polym16091286 ↗
64. 10.3390/polym1504089510.3390/polym15040895 ↗
65. Jacobs LJM. Carbon dioxide as a sustainable means to control polymer foam morphology.
66. Yetgin SH, Ünal H. Talk/EPDM/Polipropilen polimer kompozit köpük üretimi ve üretim şartlarının optimize edilmesi. Gümüşhane Üniversitesi Fen Bilim Derg 2022; 12: 864–876.
67. Çebişli HB. Modifiye Edilmiş Pet Köpük Üretimi Ve Karakterizasyonu.
68. Liu F. Processing of polyethylene and polypropylene foams in rotational molding. MSc thesis. Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Canada, 1998.
69. Nadeau A. A study of direct gas injection foam extrusion of polyolefins for a wire coating application. University of Massachusetts, 2006.
70. 10.1021/ie011022c10.1021/ie011022c ↗
71. Khare AA. The relationship between processing conditions and properties in chemically blown injection molded nylon foams. University of Massachusetts, 1996.
72. Dong N. Study of fundamental foaming mechanisms in chemical-blowing-agent based foaming process. National Library of Canada= Bibliothèque nationale du Canada, Ottawa, 2004.
73. Bradley MB, Phillips EM. Novel foamable polypropylene polymers. SPE ANTEC Tech Pap 1990; 36: 717–720.
74. Moore EP. Polypropylene handbook: polymerization, characterization, properties, processing, applications. Hanser Publishers, 1996.
75. Karger-Kocsis J, Bárány T. Polypropylene handbook. Choice Rev Online 2006; 43: 43-2825-43–2825.
76. Maier C, Calafut T. Polypropylene: the definitive user’s guide and databook. William Andrew, 1998.
77. McCallum TJ. Properties and foaming behaviour of thermoplastic olefin blends based on linear and branched polypropylene. MSc thesis Department of Chemical Engineering Queen’s University Kingston Canada 2007.
78. 10.1201/978020391180810.1201/9780203911808 ↗
79. Maddah HA. Polypropylene as a promising plastic: a review. Am J Polym Sci 2916; 6: 1–11.
80. 10.1002/app.3910710.1002/app.39107 ↗
81. 10.1002/1099-1581(200007)11:7<342::AID-PAT977>3.0.CO;2-M10.1002/1099-1581(200007)11:7<342::AID-PAT977>3.0.CO;2-M ↗
82. 10.1016/j.compscitech.2008.11.01010.1016/j.compscitech.2008.11.010 ↗
83. 10.1002/app.3756010.1002/app.37560 ↗
84. 10.1002/pen.2110610.1002/pen.21106 ↗
85. 10.1002/pen.1010810.1002/pen.10108 ↗
86. 10.1002/app.1370010.1002/app.13700 ↗
87. 10.1002/app.2227110.1002/app.22271 ↗
88. 10.1007/s10853-008-2930-510.1007/s10853-008-2930-5 ↗
89. 10.1002/pi.189410.1002/pi.1894 ↗
90. 10.1002/vnl.2139010.1002/vnl.21390 ↗
91. 10.1007/BF0037527110.1007/BF00375271 ↗
92. 10.1016/j.eurpolymj.2019.07.01610.1016/j.eurpolymj.2019.07.016 ↗
93. 10.1016/j.supflu.2016.01.01610.1016/j.supflu.2016.01.016 ↗
94. 10.1002/app.1986.07032042810.1002/app.1986.070320428 ↗
95. 10.1002/pen.2015210.1002/pen.20152 ↗
96. 10.1590/S0104-1428200600010001510.1590/S0104-14282006000100015 ↗
97. 10.1016/j.cej.2018.05.16110.1016/j.cej.2018.05.161 ↗
98. 10.1177/02624893150340040210.1177/026248931503400402 ↗
99. 10.1016/j.compositesa.2021.10642310.1016/j.compositesa.2021.106423 ↗
100. 10.1002/978111848079310.1002/9781118480793 ↗