Recent Advances in the Development of Rigid Polyurethane Foams of Improved Thermal Insulation Efficiency
Source abstract
Abstract
The fundamental mechanisms of heat transfer through rigid polyurethane (PUR) foam are reviewed in terms of three distinct elements, λ g , λ s and λ r , which represent heat transfer by thermal conductivity through the gas phase, solid phase and by radiation respectively. It is demonstrated that values for λ g and λ s can be estimated, and from the measured λ-value of the foam, an approximation of λ r obtained by difference. This shows that there is considerable scope for improving the thermal insulation efficiency of these materials. Small reductions in λ-value can be obtained by optimisation of λ g and λ s elements, but the main scope for improvement is by reduction of λ r This can be partially achieved by the production of foam with very fine cells. However there are strong indications that the cell windows are transparent to radiative heat transfer and several other factors need to be taken into account in reducing λ r to its minimum practical value. Combining all these factors, laboratory foams can be produced consistently with λ-values 20–30% lower than typical commercial material. Ageing of the λ-value, which results from air ingress into the cells of the foam, can be substantially eliminated by covering the foam with air-impermeable barriers. However recent developments have shown that by optimisation of foam formulations, the rate of ageing and the aged λ-value can also be significantly reduced in uncovered foams. The excellent insulation properties of PUR foams compared with competitive materials is a consequence of the low value of λ g , which results from the encapsulation of the Refrigerant 11 blowing agent inside the foam cells. Supplies of Refrigerant 11 may become limited in the future, with potential adverse effects on the insulation efficiency of PUR foam. In such a situation the indications are that any losses in insulation efficiency can be minimised and be more than compensated for by further optimisation of the approaches discussed in this paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Radiative Heat Transfer Studies · Aerogels and thermal insulation · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
ICI plc, Polyurethanes Group, Everslaan 45, B-3078 Kortenberg, Belgium
References (11)
Show source-provided references
1. 10.1177/02624893860050050110.1177/026248938600500501 ↗
2. Cunningham A., XVIII International Symposium, Heat and Mass Transfer in Cryoengineering and Refrigeration, Sept. 1–5, 1986.
3. 10.1016/0032-3861(81)90261-510.1016/0032-3861(81)90261-5 ↗
4. 10.1177/02624893840030020410.1177/026248938400300204 ↗
5. Schuetz M.A and Glicksman L.R., 6th International Polyurethane Conference, San Diego, California, November 1983.
6. 10.1177/0021955X840200020210.1177/0021955X8402000202 ↗
7. 10.1007/BF0050395610.1007/BF00503956 ↗
8. Brandreth D.A. and Ingersoll M.G., SPI Conference, Strasbourg, 1980, 107.
9. 10.1177/0021955X820180050310.1177/0021955X8201800503 ↗
10. Steinle H. · Kaltechniek - Klimatisierung · 1972 · 24 · 153
11. Jeffs G.M.F., Partington J.B. and Speroni E., 12th International Foamed Plastics Symposium, Dusseldorf, May 1983.