Comparison of the characteristics of cellulose microfibril aggregates isolated from fiber and parenchyma cells of Moso bamboo (Phyllostachys pubescens)
Source abstract
Abstract
This study examined the relationship between the functions of plant cells and the characteristics of cellulose microfibril aggregates in the cell walls. For this purpose, the mature bamboo (Phyllostachys pubescens) culm was separated into fiber and parenchyma cells, and then the morphological and physical properties of the cellulose microfibril aggregates isolated from both cells were compared. SEM observations revealed that both fiber and parenchyma cells consist of similar microfibril aggregates approximately 15–20 nm in width. Moreover, X-ray analysis and the tensile tests of the sheets prepared from the microfibril aggregates showed that the cellulose microfibrils isolated from fiber and parenchyma cells had almost the same cellulose crystallinity and longitudinal Young’s modulus in the dry state. These results suggest that all the cellulose microfibrils synthesized in the same individual exhibit the same characteristics in the dry state regardless of cell function.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Bamboo properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Abe K, Yano H (2009) Comparison of the characteristics of cellulose microfibril aggregates of wood, rice straw and potato. Cellulose doi: 10.1007/s10570-009-9334-910.1007/s10570-009-9334-9 ↗
2. Abe K, Iwamoto S, Yano H (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules 8:3276–327810.1021/bm700624p ↗
3. Bhuiyan MTR, Hirai N, Sobue N (2000) Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. J Wood Sci 46:431–43610.1007/BF00765800 ↗
4. Crow E, Murphy RJ (2000) Microfibril orientation in differentiating and maturing fibre and parenchyma cell walls in culrns of bamboo (Phy ZZostachys viridiglaucescens (Cam.) Riv. & Riv.). Bot J Linnean Society 134:339–359
5. Donaldson L (2007) Cellulose microfibril aggregates and their size variation with cell wall type. Wood Sci Technol 41:443–46010.1007/s00226-006-0121-6 ↗
6. Fahlén J, Salmén L (2005) Pore and matrix distribution in the fiber wall revealed by atomic force microscopy and image analysis. Biomacromolecules 6:433–43810.1021/bm040068x ↗
7. Fratzl P, Burgert I, Gupta HS (2004) On the role of interface polymers for the mechanics of natural polymeric composites. Phys Chem Chem Phys 6:5575–557910.1039/b411986j ↗
8. Iwamoto S, Nakagaito AN, Yano H (2007) Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appl Phys A 89:461–46610.1007/s00339-007-4175-6 ↗
9. Iwamoto S, Abe K, Yano H (2008) The effect of hemicelluloses on wood pulp nanofibrillation and nanofiber network characteristics. Biomacromolecules 9:1022–102610.1021/bm701157n ↗
10. Rayirath P, Avramidis S, Mansfield SD (2008) The effect of wood drying on crystallinity and microfibril angle in black spruce (Picea mariana). J Wood Chem Technol 28:167–17910.1080/02773810802346950 ↗
11. Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Textile Res J 29:786–79410.1177/004051755902901003 ↗
12. Wise LE, Murphy M, D’Addieco AA (1946) Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses. Paper Trade J 122:35–43
13. Yamamoto H, Abe K, Arakawa Y, Okuyama T, Gril J (2005) Role of the gelatinous layer (G-layer) on the origin of the physical properties of the tension wood of Acer sieboldianum. J Wood Sci 51:222–23310.1007/s10086-004-0639-x ↗