Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt
Source abstract
Abstract
Abstract In this paper, we report the effect of doping sodium iodide (NaI) salt into a polymer blend matrix of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA). Solution casting approach was used to prepare solid polymer electrolyte (SPE) films. The films were characterized by Fourier-transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), electrical impedance spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). XRD showed that NaI incorporation decreased the crystallinity of NaCMC/PVA-based SPE. FTIR technique confirmed the complexation of salt with polymer matrix due to the formation of the coordination bond between Na+ and –OH group and hydrogen bond between I− and –CH group. The sample with 30 wt% NaI showed the highest conductivity of 2.52 × 10–3 S cm−1, strongly influenced by the highest charge concentration $$(n)$$, not its mobility (μ). DSC analysis revealed an increase in glass transition temperature $$({T}g)$$ with increasing salt content. TGA studies showed a decrease in thermal stability with salt inclusion. The transference number was found to be 0.99 for the highest conducting sample showing the primary charge carriers are ions. The highest conducting sample exhibited a mechanical strength of 15.42 MPa at room temperature, and it has been used to fabricate a battery to evaluate its suitability in energy storage devices. Graphical abstract Graphical abstract created with https://biorender.com.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Conducting polymers and applications · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Abd El-Kader FH, Osman WH, Ragab HS et al (2004) Electrical and optical properties of polyvinyl alcohol thin films doped with metal salts. J Polym Mater 21:49–60
2. Abdullah AM, Aziz SB, Saeed SR (2021) Structural and electrical properties of polyvinyl alcohol (PVA): Methyl cellulose (MC) based solid polymer blend electrolytes inserted with sodium iodide (NaI) salt. Arab J Chem 14:103388. https://doi.org/10.1016/J.ARABJC.2021.10338810.1016/J.ARABJC.2021.103388 ↗
3. Ahmad NH, Isa MIN (2016) Characterization of un-plasticized and propylene carbonate plasticized carboxymethyl cellulose doped ammonium chloride solid biopolymer electrolytes. Carbohydr Polym 137:426–43210.1016/j.carbpol.2015.10.092 ↗
4. Arof AK, Amirudin S, Yusof SZ, Noor IM (2014) A method based on impedance spectroscopy to determine transport properties of polymer electrolytes. Phys Chem Chem Phys 16:1856–186710.1039/C3CP53830C ↗
5. Aziz SB, Brevik I, Hamsan MH et al (2020) Compatible solid polymer electrolyte based on methyl cellulose for energy storage application: structural, electrical, and electrochemical properties. Polym 12:2257. https://doi.org/10.3390/POLYM1210225710.3390/POLYM12102257 ↗
6. Baskaran R, Selvasekarapandian S, Hirankumar G (2004) Bhuvaneswari MS (2004) Dielectric and conductivity relaxations in PVAc based polymer electrolytes. Ionics 101(10):129–134. https://doi.org/10.1007/BF0241032110.1007/BF02410321 ↗
7. Bharati DC, Kumar H, Saroj AL (2020) Chitosan-PEG-NaI based bio-polymer electrolytes: structural, thermal and ion dynamics studies. Mater Res Express 6:125360. https://doi.org/10.1088/2053-1591/AB66A310.1088/2053-1591/AB66A3 ↗
8. Bharati DC, Rawat P, Saroj AL (2021) Structural, thermal, and ion dynamics studies of PVA-CS-NaI-based biopolymer electrolyte films. J Solid State Electrochem 25:1727–1741. https://doi.org/10.1007/S10008-021-04946-6/FIGURES/1610.1007/S10008-021-04946-6/FIGURES/16 ↗
9. Bondarenko AS, Ragoisha GA (2005) In: Pomerantsev AL (ed) Progress in chemometrics research. Nova Science Publishers, New York, pp 89–102.
10. Careem MA, Noor ISM, Arof AK (2020) Impedance spectroscopy in polymer electrolyte characterization. In: Winie T, Arof AK, Thomas S (eds) Polymer electrolytes. Wiley, New York, pp 23–64. https://doi.org/10.1002/9783527805457.ch210.1002/9783527805457.ch2 ↗
11. Chai KL, Noor IM, Aung MM et al (2020) Non-edible oil based polyurethane acrylate with tetrabutylammonium iodide gel polymer electrolytes for dye-sensitized solar cells. Sol Energy 208:457–468. https://doi.org/10.1016/J.SOLENER.2020.08.02010.1016/J.SOLENER.2020.08.020 ↗
12. Chitra R, Sathya P, Selvasekarapandian S et al (2019) Synthesis and characterization of iota-carrageenan solid biopolymer electrolytes for electrochemical applications. Ionics (kiel) 25:2147–2157. https://doi.org/10.1007/s11581-018-2687-z10.1007/s11581-018-2687-z ↗
13. Colò F, Bella F, Nair JR et al (2015) Cellulose-based novel hybrid polymer electrolytes for green and efficient Na-ion batteries. Electrochim Acta 174:185–190. https://doi.org/10.1016/j.electacta.2015.05.17810.1016/j.electacta.2015.05.178 ↗
14. De Melo EM, Clark JH, Matharu AS (2017) The Hy-MASS concept: Hydrothermal microwave assisted selective scissoring of cellulose for: In situ production of (meso)porous nanocellulose fibrils and crystals. Green Chem 19:3408–3417. https://doi.org/10.1039/c7gc01378g10.1039/c7gc01378g ↗
15. del Cerro DR, Koso TV, Kakko T et al (2020) (2020) Crystallinity reduction and enhancement in the chemical reactivity of cellulose by non-dissolving pre-treatment with tetrabutylphosphonium acetate. Cellul 2710(27):5545–5562. https://doi.org/10.1007/S10570-020-03044-610.1007/S10570-020-03044-6 ↗
16. El-Sayed S, Mahmoud KH, Fatah AA, Hassen A (2011) DSC, TGA and dielectric properties of carboxymethyl cellulose/polyvinyl alcohol blends. Phys B Condens Matter 406:4068–4076. https://doi.org/10.1016/j.physb.2011.07.05010.1016/j.physb.2011.07.050 ↗
17. Fergus JW (2010) Ceramic and polymeric solid electrolytes for lithium-ion batteries. J Power Sources 195:4554–4569. https://doi.org/10.1016/J.JPOWSOUR.2010.01.07610.1016/J.JPOWSOUR.2010.01.076 ↗
18. French AD (2013) (2013) Idealized powder diffraction patterns for cellulose polymorphs. Cellul 212(21):885–896. https://doi.org/10.1007/S10570-013-0030-410.1007/S10570-013-0030-4 ↗
19. Furtado CA, Silva GG, Machado JC, Pimenta MA, Silva RA (1999) Study of correlations between microstructure and conductivity in a thermoplastic polyurethane electrolyte. J Phys Chem B 103(34):7102–711010.1021/jp984601c ↗
20. He R, Kyu T (2016) Effect of plasticization on ionic conductivity enhancement in relation to glass transition temperature of crosslinked polymer electrolyte membranes. Macromolecules 49:5637–564810.1021/acs.macromol.6b00918 ↗
21. Hodge RM, Edward GH, Simon GP (1996) Water absorption and states of water in semicrystalline poly(vinyl alcohol) films. Polymer (guildf) 37:1371–1376. https://doi.org/10.1016/0032-3861(96)81134-710.1016/0032-3861(96)81134-7 ↗
22. Jiang C, Li H, Wang C (2017) Recent progress in solid-state electrolytes for alkali-ion batteries. Sci Bull 62:1473–1490. https://doi.org/10.1016/j.scib.2017.10.01110.1016/j.scib.2017.10.011 ↗
23. Jonscher AK (1999) Dielectric relaxation in solids. J Phys D Appl Phys 32:R57. https://doi.org/10.1088/0022-3727/32/14/20110.1088/0022-3727/32/14/201 ↗
24. Khoramabadi HN, Arefian M, Hojjati M et al (2020) A review of Polyvinyl alcohol/Carboxymethyl cellulose (PVA/CMC) composites for various applications. J Compos Compd 2:69–76
25. Klongkan S, Pumchusak J (2015) Effects of the addition of LiCF3SO3 Salt on the conductivity, thermal and mechanical properties of PEO-LiCF3SO3 solid polymer electrolyte. Int J Chem Eng Appl 6:165–168. https://doi.org/10.7763/ijcea.2015.v6.47410.7763/ijcea.2015.v6.474 ↗
26. Krishna Jyothi N, Vijaya Kumar K, Sunita Sundari G, Narayana Murthy P (2016) Ionic conductivity and battery characteristic studies of a new PAN-based Na+ ion conducting gel polymer electrolyte system. Indian J Phys 90:289–296. https://doi.org/10.1007/s12648-015-0758-910.1007/s12648-015-0758-9 ↗
27. Kumar M, Tiwari T, Chauhan JK, Srivastava N (2014) Understanding the ion dynamics and relaxation behavior from impedance spectroscopy of NaI doped Zwitterionic polymer system. Mater Res Express 1:045003. https://doi.org/10.1088/2053-1591/1/4/04500310.1088/2053-1591/1/4/045003 ↗
28. Landel RF, Nielsen LE (1993) Mechanical properties of polymers and composites. CRC Press, Boca Raton10.1201/b16929 ↗
29. Li X-F, Li F, Shi Y et al (2005) Nature of proton dynamics in a polymer electrolyte membrane, nafion: a first-principles molecular dynamics study. Solid State Ionics 176:3673–3680. https://doi.org/10.1063/1.219277710.1063/1.2192777 ↗
30. MacGlashan GS, Andreev YG, Bruce PG (1999) Structure of the polymer electrolyte poly(ethylene oxide)6:LiAsF6. Nature 398:792–794. https://doi.org/10.1038/1973010.1038/19730 ↗
31. Mazuki NF, Rasali NMJ, Saadiah MA, Samsudin AS (2018) Irregularities trend in electrical conductivity of CMC/PVA-NH4Cl based solid biopolymer electrolytes. AIP Conf Proc 2030:020221. https://doi.org/10.1063/1.506686210.1063/1.5066862 ↗
32. Mazuki NF, Fuzlin AF, Saadiah MA, Samsudin AS (2019) An investigation on the abnormal trend of the conductivity properties of CMC/PVA-doped NH4Cl-based solid biopolymer electrolyte system. Ionics (kiel) 25:2657–2667. https://doi.org/10.1007/s11581-018-2734-910.1007/s11581-018-2734-9 ↗
33. Mishra K, Arif T, Kumar R, Kumar D (2019) Effect of Al2O3 nanoparticles on ionic conductivity of PVdF-HFP/PMMA blend-based Na+-ion conducting nanocomposite gel polymer electrolyte. J Solid State Electrochem 23:2401–2409. https://doi.org/10.1007/s10008-019-04348-910.1007/s10008-019-04348-9 ↗
34. Mohamed NS, Zakaria MZ, Ali AMM, Arof AK (1997) Characteristics of poly(ethylene oxide)-NaI polymer electrolyte and electrochemical cell performances. J Power Sources 66:169–172. https://doi.org/10.1016/S0378-7753(96)02541-410.1016/S0378-7753(96)02541-4 ↗
35. Mohd Ali NS, Nagao Y, Samsudin AS (2020) Ethylene carbonate and polyethylene glycol as efficient plasticizers in CMC-PVA-NH4NO3-based polymer electrolyte. Makara J Technol 24(1):1310.7454/mst.v24i1.3833 ↗
36. Muthuvinayagam M, Gopinathan C (2015) Characterization of proton conducting polymer blend electrolytes based on PVdF-PVA. Polymer (guildf) 68:122–130. https://doi.org/10.1016/J.POLYMER.2015.05.00810.1016/J.POLYMER.2015.05.008 ↗
37. Ngai KS, Ramesh S, Ramesh K, Juan JC (2016) A review of polymer electrolytes: fundamental, approaches and applications. Ionics (kiel) 22:1259–1279. https://doi.org/10.1007/s11581-016-1756-410.1007/s11581-016-1756-4 ↗
38. Noor I (2020) Determination of charge carrier transport properties of gellan gum–lithium triflate solid polymer electrolyte from vibrational spectroscopy. High Perform Polym 32:168–174. https://doi.org/10.1177/095400831989001610.1177/0954008319890016 ↗
39. Noor NAM, Isa MIN (2019) Investigation on transport and thermal studies of solid polymer electrolyte based on carboxymethyl cellulose doped ammonium thiocyanate for potential application in electrochemical devices. Int J Hydrogen Energy 44:8298–830610.1016/j.ijhydene.2019.02.062 ↗
40. Noor IS, Majid SR, Arof AK (2013) Poly(vinyl alcohol)–LiBOB complexes for lithium–air cells. Electrochim Acta 102:149–160. https://doi.org/10.1016/J.ELECTACTA.2013.04.01010.1016/J.ELECTACTA.2013.04.010 ↗
41. Pawlicka A, Danczuk M, Wieczorek W, Zygadło-Monikowska E (2008) Influence of plasticizer type on the properties of polymer electrolytes based on Chitosan†. J Phys Chem A 112:8888–8895. https://doi.org/10.1021/JP801573H10.1021/JP801573H ↗
42. Pritam AA, Sharma AL (2020) Selection of best composition of Na+ ion conducting PEO-PEI blend solid polymer electrolyte based on structural, electrical, and dielectric spectroscopic analysis. Ionics (kiel) 26:745–766. https://doi.org/10.1007/s11581-019-03245-510.1007/s11581-019-03245-5 ↗
43. Pritam Arya A, Sharma AL (2021) Conductivity and dielectric spectroscopy of Na+ ion conducting blended solid polymer nanocomposites. In: Sharma Yogesh, Varma Ghanshyam Das, Mukhopadhyay Amartya, Thangadurai Venkataraman (eds) Recent research trends in energy storage devices. Springer, Singapore
44. Ramesh S, Arof AK (2001) Structural, thermal and electrochemical cell characteristics of poly(vinyl chloride)-based polymer electrolytes. J Power Sources 99:41–47. https://doi.org/10.1016/S0378-7753(00)00690-X10.1016/S0378-7753(00)00690-X ↗
45. Ramlli MA, Isa MIN (2016) Structural and ionic transport properties of protonic conducting solid biopolymer electrolytes based on carboxymethyl cellulose doped with ammonium fluoride. J Phys Chem B 120:11567–11573. https://doi.org/10.1021/acs.jpcb.6b0606810.1021/acs.jpcb.6b06068 ↗
46. Rani NS, Sannappa J, Demappa T (2014a) Structural, thermal, and electrical studies of sodium iodide (NaI)-doped hydroxypropyl methylcellulose (HPMC) polymer electrolyte films. Ionics (kiel) 20:201–207. https://doi.org/10.1007/S11581-013-0952-8/TABLES/410.1007/S11581-013-0952-8/TABLES/4 ↗
47. Rani NS, Sannappa J, Demappa T (2014b) Effects of CdCl2 concentration on the structural, thermal and ionic conductivity properties of HPMC polymer electrolyte films. Ionics 211(21):133–140. https://doi.org/10.1007/S11581-014-1151-Y10.1007/S11581-014-1151-Y ↗
48. Saadiah MA, Zhang D, Nagao Y et al (2019) Reducing crystallinity on thin film based CMC/PVA hybrid polymer for application as a host in polymer electrolytes. J Non Cryst Solids 511:201–211. https://doi.org/10.1016/j.jnoncrysol.2018.11.03210.1016/j.jnoncrysol.2018.11.032 ↗
49. Saadiah MA, Nagao Y, Samsudin AS (2020) Proton (H+) transport properties of CMC–PVA blended polymer solid electrolyte doped with NH4NO3. Int J Hydrogen Energy 45:14880–1489610.1016/j.ijhydene.2020.03.213 ↗
50. Saidi NM, Ming Ng H, Omar FS et al (2019) Polyacrylonitrile–poly(1-vinyl pyrrolidone-co-vinyl acetate) blend based gel polymer electrolytes incorporated with sodium iodide salt for dye-sensitized solar cell applications. J Appl Polym Sci 136:47810. https://doi.org/10.1002/APP.4781010.1002/APP.47810 ↗
51. Saminatha Kumaran V, Ng HM, Ramesh S et al (2018) The conductivity and dielectric studies of solid polymer electrolytes based on poly (acrylamide-co-acrylic acid) doped with sodium iodide. Ionics (kiel) 24:1947–1953. https://doi.org/10.1007/S11581-018-2448-Z/FIGURES/510.1007/S11581-018-2448-Z/FIGURES/5 ↗
52. Selvanathan V, Halim MNA, Azzahari AD et al (2018) Effect of polar aprotic solvents on hydroxyethyl cellulose-based gel polymer electrolyte. Ionics 247(24):1955–1964. https://doi.org/10.1007/S11581-018-2455-010.1007/S11581-018-2455-0 ↗
53. Shanmuga Priya S, Karthika M, Selvasekarapandian S, Manjuladevi R (2018) Preparation and characterization of polymer electrolyte based on biopolymer I-Carrageenan with magnesium nitrate. Solid State Ionics 327:136–149. https://doi.org/10.1016/J.SSI.2018.10.03110.1016/J.SSI.2018.10.031 ↗
54. Shetty SK, Ismayil HS et al (2021a) Dielectric relaxations and ion transport study of NaCMC:NaNO3 solid polymer electrolyte films. Ionics (kiel) 27:2509–2525. https://doi.org/10.1007/s11581-021-04023-y10.1007/s11581-021-04023-y ↗
55. Shetty SK, Ismayil Nasreen, Swathi Mahesha MG, Rashmitha K (2021b) Sodium ion conducting PVA/NaCMC bio poly-blend electrolyte films for energy storage device applications. International Journal of Polymer Analysis and Characterization 26:411–424. https://doi.org/10.1080/1023666X.2021.189968510.1080/1023666X.2021.1899685 ↗
56. Singh R, Polu AR, Bhattacharya B et al (2016) Perspectives for solid biopolymer electrolytes in dye sensitized solar cell and battery application. Renew Sustain Energy Rev 65:1098–1117. https://doi.org/10.1016/J.RSER.2016.06.02610.1016/J.RSER.2016.06.026 ↗
57. Singh P, Bharati DC, Gupta PN, Saroj AL (2018) Vibrational, thermal and ion transport properties of PVA-PVP-PEG-MeSO4Na based polymer blend electrolyte films. J Non Cryst Solids 494:21–30. https://doi.org/10.1016/j.jnoncrysol.2018.04.05210.1016/j.jnoncrysol.2018.04.052 ↗
58. Singh P, Gupta PN, Saroj AL (2020) Ion dynamics and dielectric relaxation behavior of PVA-PVP-NaI-SiO2 based nano-composites polymer blend electrolytes. Phys B Condens Matter 578:411850. https://doi.org/10.1016/J.PHYSB.2019.41185010.1016/J.PHYSB.2019.411850 ↗
59. Steiner T (2002) The hydrogen bond in the solid state. Angew Chem Int Ed Engl 41:49–76
60. Su’ait MS, Ahmad A, Hamzah H, Rahman MYA (2011) Effect of lithium salt concentrations on blended 49% poly(methyl methacrylate) grafted natural rubber and poly(methyl methacrylate) based solid polymer electrolyte. Electrochim Acta 57:123–131. https://doi.org/10.1016/J.ELECTACTA.2011.06.01510.1016/J.ELECTACTA.2011.06.015 ↗
61. Subban RHY, Arof AK (1996) Sodium iodide added chitosan electrolyte film for polymer batteries. Phys Scr 53:382. https://doi.org/10.1088/0031-8949/53/3/02110.1088/0031-8949/53/3/021 ↗
62. Subban RHY, Arof AK, Radhakrishna S (1996) Polymer batteries with chitosan electrolyte mixed with sodium perchlorate. Mater Sci Eng B 38:156–160. https://doi.org/10.1016/0921-5107(95)01508-610.1016/0921-5107(95)01508-6 ↗
63. Tang R, Jiang C, Qian W et al (2015) Dielectric relaxation, resonance and scaling behaviors in Sr3Co2Fe24O41 hexaferrite. Sci Rep 5:1–11. https://doi.org/10.1038/srep1364510.1038/srep13645 ↗
64. Tellamekala S, Ojha P, Gopal NO et al (2020) Effect of K+ ion doping on structural and physical properties of PVA/MAA:EA polymer blend electrolytes. Mater Res Innov 25:287–29910.1080/14328917.2020.1795336 ↗
65. Vahini M, Muthuvinayagam M, Isa MIN (2019) Preparation and characterization of biopolymer electrolytes based on pectin and NaNO3 for battery applications. Polym Sci Ser A 61:823–831. https://doi.org/10.1134/S0965545X1906012910.1134/S0965545X19060129 ↗
66. Wang K, Ju S, Gao Q et al (2021) Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries. J Alloys Compd 860:158445. https://doi.org/10.1016/J.JALLCOM.2020.15844510.1016/J.JALLCOM.2020.158445 ↗
67. Wojdyr M, Gierlotka S, Palosz B (2004) FITYK – peak-fitting software with support for powder patterns analysis. Acta Crystallogr Sect A Found Crystallogr 60:s246–s246. https://doi.org/10.1107/S010876730409511X10.1107/S010876730409511X ↗
68. Yadav M, Kumar M, Tiwari T, Srivastava N (2017) Wheat starch + NaI: a high conducting environment friendly electrolyte system for energy devices. Ionics (kiel) 23:2871–2880. https://doi.org/10.1007/s11581-016-1930-810.1007/s11581-016-1930-8 ↗
69. Yao W, Weng Y, Catchmark JM (2020) Improved cellulose X-ray diffraction analysis using Fourier series modeling. Cellul 27:5563–5579. https://doi.org/10.1007/S10570-020-03177-810.1007/S10570-020-03177-8 ↗
70. Yue L, Ma J, Zhang J et al (2016) All solid-state polymer electrolytes for high-performance lithium ion batteries. Elsevier, Amsterdam10.1016/j.ensm.2016.07.003 ↗
71. Zhang X, Daigle J-C, Zaghib K (2020) Comprehensive review of polymer architecture for all-solid-state lithium rechargeable batteries. Mater 13:2488. https://doi.org/10.3390/MA1311248810.3390/MA13112488 ↗
72. Zulkifli A, Saadiah MA, Mazuki NF, Samsudin AS (2020) Characterization of an amorphous materials hybrid polymer electrolyte based on a LiNO3-doped, CMC-PVA blend for application in an electrical double layer capacitor. Mater Chem Phys 253:123312. https://doi.org/10.1016/j.matchemphys.2020.12331210.1016/j.matchemphys.2020.123312 ↗