Magnetized Tectona grandis sawdust as a novel adsorbent: preparation, characterization, and utilization for the removal of methylene blue from aqueous solution
Source abstract
Abstract
In the submitted research work, adsorption characteristic of magnetized Tectona grandis sawdust for methylene blue from aqueous media was explored. The prepared adsorbent was characterized by SEM/EDXS, TEM, BET, XRD, FTIR, TGA-DTG/DTA, VSM, and point of zero charge. To investigate the adsorption capacity and mechanisms prevailing for the adsorption of methylene blue, batch adsorption studies were performed by changing adsorbate/adsorbent contact time, pH, initial dye concentration, and temperature. The removal efficiency was found to be 90.8% under the optimized adsorption conditions. The optimal process parameters were 1 g/L of magnetized adsorbent, 60 min contact time, pH 8, and temperature of 30 °C for 100 mg/L MB solution. The laboratory generated adsorption data was best conformed by pseudo-second-order kinetics and Langmuir adsorption isotherm models. The maximum monolayer adsorption capacity was determined to be 172.41 mg/g. The adsorption process was established to be thermodynamically feasible and accompanying with the absorption of heat and escalation of entropy. Regeneration study revealed that magnetized Tectona grandis sawdust could be reused efficaciously up to four repeated adsorption–desorption cycles using HCl as the best desorbing agent. The magnetized Tectona grandis sawdust has been proved to be novel, efficient, and cost-effective adsorbent. The combined advantages of easy preparation, good affinity towards dyes, excellent separability, reusability, and cost-effectiveness of magnetized Tectona grandis sawdust make it a novel adsorbent.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Ai L, Zhou Y, Jiang J (2011) Removal of methylene blue from aqueous solution by montmorillonite/CoFe2O4 composite with magnetic separation performance. Desalination 266:72–77. https://doi.org/10.1016/j.desal.2010.08.00410.1016/j.desal.2010.08.004 ↗
2. Ali I, Peng C, Ye T, Naz I (2018) Sorption of cationic malachite green dye on phytogenic magnetic nanoparticles functionalized by 3-marcaptopropanic acid. RSC Adv 8:8878–8897. https://doi.org/10.1039/C8RA00245B10.1039/C8RA00245B ↗
3. Altıntıg E, Altundag H, Tuzen M, Sarı A (2017) Effective removal of methylene blue from aqueous solutions using magnetic loaded activated carbon as novel adsorbent. Chem Eng Res Des 122:151–163. https://doi.org/10.1016/j.cherd.2017.03.03510.1016/j.cherd.2017.03.035 ↗
4. Angelova R, Baldikova E, Pospiskova K et al (2016) Magnetically modified Sargassum horneri biomass as an adsorbent for organic dye removal. J Clean Prod 137:189–194. https://doi.org/10.1016/j.jclepro.2016.07.06810.1016/j.jclepro.2016.07.068 ↗
5. Bahnemann D (2004) Photocatalytic water treatment: solar energy applications. Sol Energy 77:445–459. https://doi.org/10.1016/j.solener.2004.03.03110.1016/j.solener.2004.03.031 ↗
6. Baldikova E, Safarikova M, Safarik I (2015) Organic dyes removal using magnetically modified rye straw. J Magn Magn Mater 380:181–185. https://doi.org/10.1016/j.jmmm.2014.09.00310.1016/j.jmmm.2014.09.003 ↗
7. Barrett EP, Joyner LG, Halenda PP (1951) The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms. J Am Chem Soc 73:373–380. https://doi.org/10.1021/ja01145a12610.1021/ja01145a126 ↗
8. Bhatnagar A, Sillanpää M, Witek-Krowiak A (2015) Agricultural waste peels as versatile biomass for water purification: a review. Chem Eng J 270:244–271. https://doi.org/10.1016/j.cej.2015.01.13510.1016/j.cej.2015.01.135 ↗
9. Bishnoi S, Kumar A, Selvaraj R (2018) Facile synthesis of magnetic iron oxide nanoparticles using inedible Cynometra ramiflora fruit extract waste and their photocatalytic degradation of methylene blue dye. Mater Res Bull 97:121–127. https://doi.org/10.1016/j.materresbull.2017.08.04010.1016/j.materresbull.2017.08.040 ↗
10. Chakraborty S, Purkait MK, DasGupta S et al (2003) Nanofiltration of textile plant effluent for color removal and reduction in COD. Sep Purif Technol 31:141–151. https://doi.org/10.1016/S1383-5866(02)00177-610.1016/S1383-5866(02)00177-6 ↗
11. Chang J, Ma J, Ma Q et al (2016) Adsorption of methylene blue onto Fe3O4/activated montmorillonite nanocomposite. Appl Clay Sci 119:132–140. https://doi.org/10.1016/j.clay.2015.06.03810.1016/j.clay.2015.06.038 ↗
12. Chen X, Chen G, Yue PL (2002) Novel electrode system for electroflotation of wastewater. Environ Sci & Technol 36:778–783. https://doi.org/10.1021/es011003u10.1021/es011003u ↗
13. Cheng S, Zhang L, Ma A et al (2018) Comparison of activated carbon and iron/cerium modified activated carbon to remove methylene blue from wastewater. J Environ Sci 65:92–102. https://doi.org/10.1016/j.jes.2016.12.02710.1016/j.jes.2016.12.027 ↗
14. Cherniwchan J (2012) Economic growth, industrialization, and the environment. Resour Energy Econ 34:442–467. https://doi.org/10.1016/j.reseneeco.2012.04.00410.1016/j.reseneeco.2012.04.004 ↗
15. Chizari Fard G, Mirjalili M, Najafi F (2017) Hydroxylated α-Fe2O3 nanofiber: optimization of synthesis conditions, anionic dyes adsorption kinetic, isotherm and error analysis. J Taiwan Inst Chem Eng 70:188–199. https://doi.org/10.1016/j.jtice.2016.10.04510.1016/j.jtice.2016.10.045 ↗
16. Cottet L, Almeida CAP, Naidek N et al (2014) Adsorption characteristics of montmorillonite clay modified with iron oxide with respect to methylene blue in aqueous media. Appl Clay Sci 95:25–31. https://doi.org/10.1016/j.clay.2014.03.02310.1016/j.clay.2014.03.023 ↗
17. Daneshvar E, Vazirzadeh A, Niazi A et al (2017) Desorption of Methylene blue dye from brown macroalga: effects of operating parameters, isotherm study and kinetic modeling. J Clean Prod 152:443–453. https://doi.org/10.1016/j.jclepro.2017.03.11910.1016/j.jclepro.2017.03.119 ↗
18. Foo KY, Hameed BH (2010) Insights into the modeling of adsorption isotherm systems. Chem Eng J 156:2–10. https://doi.org/10.1016/j.cej.2009.09.01310.1016/j.cej.2009.09.013 ↗
19. Fu R, Liu Y, Lou Z et al (2016) Adsorptive removal of Pb(II) by magnetic activated carbon incorporated with amino groups from aqueous solutions. J Taiwan Inst Chem Eng 62:247–258. https://doi.org/10.1016/j.jtice.2016.02.01210.1016/j.jtice.2016.02.012 ↗
20. Ge H, Wang C, Liu S, Huang Z (2016) Synthesis of citric acid functionalized magnetic graphene oxide coated corn straw for methylene blue adsorption. Bioresour Technol 221:419–429. https://doi.org/10.1016/j.biortech.2016.09.06010.1016/j.biortech.2016.09.060 ↗
21. George G, Saravanakumar MP (2018) Facile synthesis of carbon-coated layered double hydroxide and its comparative characterisation with Zn–Al LDH: application on crystal violet and malachite green dye adsorption—isotherm, kinetics and Box-Behnken design. Environ Sci Pollut Res 25:30236–30254. https://doi.org/10.1007/s11356-018-3001-310.1007/s11356-018-3001-3 ↗
22. Guo W, Wang S, Wang Y et al (2018) Sorptive removal of phenanthrene from aqueous solutions using magnetic and non-magnetic rice husk-derived biochars. R Soc Open Sci 5:172382. https://doi.org/10.1098/rsos.17238210.1098/rsos.172382 ↗
23. Gupta VK, Nayak A (2012) Cadmium removal and recovery from aqueous solutions by novel adsorbents prepared from orange peel and Fe2O3 nanoparticles. Chem Eng J 180:81–90. https://doi.org/10.1016/j.cej.2011.11.00610.1016/j.cej.2011.11.006 ↗
24. Gupta VK, Ali I, Saleh TA et al (2012) Chemical treatment technologies for waste-water recycling—an overview. RSC Adv 2:6380. https://doi.org/10.1039/c2ra20340e10.1039/c2ra20340e ↗
25. Hasan R, Chong CC, Setiabudi HD et al (2019) Process optimization of methylene blue adsorption onto eggshell–treated palm oil fuel ash. Environ Technol Innov 13:62–73. https://doi.org/10.1016/j.eti.2018.10.00410.1016/j.eti.2018.10.004 ↗
26. Jafari S, Zhao F, Zhao D et al (2015) A comparative study for the removal of methylene blue dye by N and S modified TiO2 adsorbents. J Mol Liq 207:90–98. https://doi.org/10.1016/j.molliq.2015.03.02610.1016/j.molliq.2015.03.026 ↗
27. Jamshaid A, Hamid A, Muhammad N et al (2017) Cellulose-based materials for the removal of heavy metals from wastewater: an overview. ChemBioEng Rev 4:240–256. https://doi.org/10.1002/cben.20170000210.1002/cben.201700002 ↗
28. Karimifard S, Alavi Moghaddam MR (2018) Application of response surface methodology in physicochemical removal of dyes from wastewater: a critical review. Sci Total Environ 640–641:772–797. https://doi.org/10.1016/j.scitotenv.2018.05.35510.1016/j.scitotenv.2018.05.355 ↗
29. Kataria N, Garg VK (2018) Green synthesis of Fe3O4 nanoparticles loaded sawdust carbon for cadmium(II) removal from water: regeneration and mechanism. Chemosphere 208:818–828. https://doi.org/10.1016/j.chemosphere.2018.06.02210.1016/j.chemosphere.2018.06.022 ↗
30. Kataria N, Garg VK (2019) Application of EDTA modified Fe3O4/sawdust carbon nanocomposites to ameliorate methylene blue and brilliant green dye laden water. Environ Res 172:43–54. https://doi.org/10.1016/j.envres.2019.02.00210.1016/j.envres.2019.02.002 ↗
31. Khan TA, Nazir M (2015) Enhanced adsorptive removal of a model acid dye bromothymol blue from aqueous solution using magnetic chitosan-bamboo sawdust composite: batch and column studies. Environ Prog Sustain Energy 34:1444–1454. https://doi.org/10.1002/ep.1214710.1002/ep.12147 ↗
32. Leng L, Yuan X, Zeng G et al (2015) Surface characterization of rice husk bio-char produced by liquefaction and application for cationic dye (Malachite green) adsorption. Fuel 155:77–85. https://doi.org/10.1016/j.fuel.2015.04.01910.1016/j.fuel.2015.04.019 ↗
33. Li C, Wang X, Meng D, Zhou L (2018a) Facile synthesis of low-cost magnetic biosorbent from peach gum polysaccharide for selective and efficient removal of cationic dyes. Int J Biol Macromol 107:1871–1878. https://doi.org/10.1016/j.ijbiomac.2017.10.05810.1016/j.ijbiomac.2017.10.058 ↗
34. Li Y, Zhang Y, Zhang Y et al (2018b) Reed biochar supported hydroxyapatite nanocomposite: characterization and reactivity for methylene blue removal from aqueous media. J Mol Liq 263:53–63. https://doi.org/10.1016/j.molliq.2018.04.13210.1016/j.molliq.2018.04.132 ↗
35. Ma H, Li J-B, Liu W-W et al (2015) Novel synthesis of a versatile magnetic adsorbent derived from corncob for dye removal. Bioresour Technol 190:13–20. https://doi.org/10.1016/j.biortech.2015.04.04810.1016/j.biortech.2015.04.048 ↗
36. Mane VS, Vijay Babu PV (2013) Kinetic and equilibrium studies on the removal of Congo red from aqueous solution using Eucalyptus wood (Eucalyptus globulus) saw dust. J Taiwan Inst Chem Eng 44:81–88. https://doi.org/10.1016/j.jtice.2012.09.01310.1016/j.jtice.2012.09.013 ↗
37. Mashkoor F, Nasar A (2019a) Preparation, characterization and adsorption studies of the chemically modified Luffa aegyptica peel as a potential adsorbent for the removal of malachite green from aqueous solution. J Mol Liq 274:315–327. https://doi.org/10.1016/j.molliq.2018.10.11910.1016/j.molliq.2018.10.119 ↗
38. Mashkoor F, Nasar A (2019b) Polyaniline/Tectona grandis sawdust: a novel composite for efficient decontamination of synthetically polluted water containing crystal violet dye. Groundw Sustain Dev 8:390–401. https://doi.org/10.1016/j.gsd.2018.12.00810.1016/j.gsd.2018.12.008 ↗
39. Mashkoor F, Nasar A, Inamuddin AA (2018) Exploring the reusability of synthetically contaminated wastewater containing crystal violet dye using Tectona grandis sawdust as a very low-cost adsorbent. Sci Rep 8:8314. https://doi.org/10.1038/s41598-018-26655-310.1038/s41598-018-26655-3 ↗
40. Mehta D, Mazumdar S, Singh SK (2015) Magnetic adsorbents for the treatment of water/wastewater—a review. J Water Process Eng 7:244–265. https://doi.org/10.1016/j.jwpe.2015.07.00110.1016/j.jwpe.2015.07.001 ↗
41. Muralikrishna IV, Manickam V (2017) Wastewater treatment technologies. In: Environmental management. Elsevier, pp 249–293
42. Murugesan A, Vidhyadevi T, Kalaivani SS et al (2012) Kinetic and thermodynamic studies on the removal of Zn2+ and Ni2+ from their aqueous solution using poly(phenylthiourea)imine. Chem Eng J 197:368–378. https://doi.org/10.1016/j.cej.2012.05.02710.1016/j.cej.2012.05.027 ↗
43. Myers RH, Montgomery DC, Anderson-Cook CM (2016) Response surface methodology: process and product optimization using designed experiments, 4th edn. Wiley
44. Nair V, Panigrahy A, Vinu R (2014) Development of novel chitosan–lignin composites for adsorption of dyes and metal ions from wastewater. Chem Eng J 254:491–502. https://doi.org/10.1016/j.cej.2014.05.04510.1016/j.cej.2014.05.045 ↗
45. Nasar A, Mashkoor F (2019) Application of polyaniline-based adsorbents for dye removal from water and wastewater—a review. Environ Sci Pollut Res 26:5333–535610.1007/s11356-018-3990-y ↗
46. Othman NH, Alias NH, Shahruddin MZ et al (2018) Adsorption kinetics of methylene blue dyes onto magnetic graphene oxide. J Environ Chem Eng 6:2803–2811. https://doi.org/10.1016/j.jece.2018.04.02410.1016/j.jece.2018.04.024 ↗
47. Qamruzzaman, Nasar A (2014) Treatment of acetamiprid insecticide from artificially contaminated water by colloidal manganese dioxide in the absence and presence of surfactants. RSC Adv 4:62844–62850. https://doi.org/10.1039/c4ra09685a10.1039/c4ra09685a ↗
48. Qamruzzaman, Nasar A (2015) Degradation of acephate by colloidal manganese dioxide in the absence and presence of surfactants. Desalin Water Treat 55:2155–2164. https://doi.org/10.1080/19443994.2014.93775210.1080/19443994.2014.937752 ↗
49. Qamruzzaman, Nasar A (2019) Degradative treatment of bispyribac sodium herbicide from synthetically contaminated water by colloidal MnO2 dioxide in the absence and presence of surfactants. Environ Technol 40:451–457. https://doi.org/10.1080/09593330.2017.139650010.1080/09593330.2017.1396500 ↗
50. Rafatullah M, Sulaiman O, Hashim R, Ahmad A (2010) Adsorption of methylene blue on low-cost adsorbents: a review. J Hazard Mater 177:70–80. https://doi.org/10.1016/j.jhazmat.2009.12.04710.1016/j.jhazmat.2009.12.047 ↗
51. Reza RA, Ahmaruzzaman M (2015) A novel synthesis of Fe2O3 @activated carbon composite and its exploitation for the elimination of carcinogenic textile dye from an aqueous phase. RSC Adv 5:10575–10586. https://doi.org/10.1039/C4RA13601B10.1039/C4RA13601B ↗
52. Ruthiraan M, Abdullah EC, Mubarak NM, Noraini MN (2017) A promising route of magnetic based materials for removal of cadmium and methylene blue from waste water. J Environ Chem Eng 5:1447–1455. https://doi.org/10.1016/j.jece.2017.02.03810.1016/j.jece.2017.02.038 ↗
53. Saleh TA, Al-Absi AA (2017) Kinetics, isotherms and thermodynamic evaluation of amine functionalized magnetic carbon for methyl red removal from aqueous solutions. J Mol Liq 248:577–585. https://doi.org/10.1016/j.molliq.2017.10.06410.1016/j.molliq.2017.10.064 ↗
54. Schwarzenbach RP, Egli T, Hofstetter TB et al (2010) Toxic characterization of textile dyes and effluents in relation to human health hazards. Annu Rev Environ Resour 35:109–136. https://doi.org/10.1146/annurev-environ-100809-12534210.1146/annurev-environ-100809-125342 ↗
55. Shakoor S, Nasar A (2016) Removal of methylene blue dye from artificially contaminated water using citrus limetta peel waste as a very low cost adsorbent. J Taiwan Inst Chem Eng 66:154–163. https://doi.org/10.1016/j.jtice.2016.06.00910.1016/j.jtice.2016.06.009 ↗
56. Shakoor S, Nasar A (2017) Adsorptive treatment of hazardous methylene blue dye from artificially contaminated water using cucumis sativus peel waste as a low-cost adsorbent. Groundw Sustain Dev 5:152–159. https://doi.org/10.1016/j.gsd.2017.06.00510.1016/j.gsd.2017.06.005 ↗
57. Shakoor S, Nasar A (2018a) Adsorptive decontamination of synthetic wastewater containing crystal violet dye by employing Terminalia arjuna sawdust waste. Groundw Sustain Dev 7:30–38. https://doi.org/10.1016/j.gsd.2018.03.00410.1016/j.gsd.2018.03.004 ↗
58. Shakoor S, Nasar A (2018b) Utilization of Punica granatum peel as an eco-friendly biosorbent for the removal of methylene blue dye from aqueous solution. J Appl Biotechnol Bioeng 5:242–249. https://doi.org/10.15406/jabb.2018.05.0014510.15406/jabb.2018.05.00145 ↗
59. Singh DK, Mohan S, Kumar V, Hasan SH (2016) Kinetic, isotherm and thermodynamic studies of adsorption behaviour of CNT/CuO nanocomposite for the removal of As(iii) and As(v) from water. RSC Adv 6:1218–1230. https://doi.org/10.1039/C5RA20601D10.1039/C5RA20601D ↗
60. Sivashankar R, Sathya AB, Vasantharaj K, Sivasubramanian V (2014) Magnetic composite an environmental super adsorbent for dye sequestration: a review. Environ Nanotechnol Monit Manag 1–2:36–49. https://doi.org/10.1016/j.enmm.2014.06.00110.1016/j.enmm.2014.06.001 ↗
61. Taha NA, El-maghraby A (2016) Cationic dye removal using prepared magnetic peanut hulls: isotherm and kinetic study. Glob NEST J 18:25–37
62. Tan KL, Hameed BH (2017) Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions. J Taiwan Inst Chem Eng 74:25–48. https://doi.org/10.1016/j.jtice.2017.01.02410.1016/j.jtice.2017.01.024 ↗
63. Thommes M, Kaneko K, Neimark AV et al (2015) Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report). Pure Appl Chem 87:1051–1069. https://doi.org/10.1515/pac-2014-111710.1515/pac-2014-1117 ↗
64. Tong DS, Wu CW, Adebajo MO et al (2018) Adsorption of methylene blue from aqueous solution onto porous cellulose-derived carbon/montmorillonite nanocomposites. Appl Clay Sci 161:256–264. https://doi.org/10.1016/j.clay.2018.02.01710.1016/j.clay.2018.02.017 ↗
65. Tural B, Ertaş E, Enez B et al (2017) Preparation and characterization of a novel magnetic biosorbent functionalized with biomass of Bacillus Subtilis: kinetic and isotherm studies of biosorption processes in the removal of Methylene Blue. J Environ Chem Eng 5:4795–4802. https://doi.org/10.1016/j.jece.2017.09.01910.1016/j.jece.2017.09.019 ↗
66. Uddin MK (2017) A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chem Eng J 308:438–462. https://doi.org/10.1016/j.cej.2016.09.02910.1016/j.cej.2016.09.029 ↗
67. Uddin MK, Rao RAK, Chandra Mouli KVV (2018) The artificial neural network and Box-Behnken design for Cu2+ removal by the pottery sludge from water samples: equilibrium, kinetic and thermodynamic studies. J Mol Liq 266:617–627. https://doi.org/10.1016/j.molliq.2018.06.09810.1016/j.molliq.2018.06.098 ↗
68. Wahab MA, Jellali S, Jedidi N (2010) Ammonium biosorption onto sawdust: FTIR analysis, kinetics and adsorption isotherms modeling. Bioresour Technol 101:5070–5075. https://doi.org/10.1016/j.biortech.2010.01.12110.1016/j.biortech.2010.01.121 ↗
69. Wang A, Qu J, Liu H, Ge J (2004) Degradation of azo dye Acid Red 14 in aqueous solution by electrokinetic and electrooxidation process. Chemosphere 55:1189–1196. https://doi.org/10.1016/j.chemosphere.2004.01.02410.1016/j.chemosphere.2004.01.024 ↗
70. Wiklund MA (2010) Methylene blue, an old drug with new indications? Jurnalul Român Anestezie Ter intensivã 17:35–41
71. Xia Y, Yao Q, Zhang W et al (2015) Comparative adsorption of methylene blue by magnetic baker’s yeast and EDTAD-modified magnetic baker’s yeast: equilibrium and kinetic study. Arab J Chem. https://doi.org/10.1016/j.arabjc.2015.03.01010.1016/j.arabjc.2015.03.010 ↗
72. Yadav AK (2016) Toxic characterizationn of textile dyes and effluents in relation to human health hazards. J Sustain Environ Res 3: 95–102
73. Zargar B, Parham H, Rezazade M (2011) Fast removal and recovery of methylene blue by activated carbon modified with magnetic iron oxide nanoparticles. J Chinese Chem Soc 58:694–699. https://doi.org/10.1002/jccs.20119010810.1002/jccs.201190108 ↗
74. Zeng S, Duan S, Tang R et al (2014) Magnetically separable Ni0.6Fe2.4O4 nanoparticles as an effective adsorbent for dye removal: synthesis and study on the kinetic and thermodynamic behaviors for dye adsorption. Chem Eng J 258:218–228. https://doi.org/10.1016/j.cej.2014.07.09310.1016/j.cej.2014.07.093 ↗
75. Zhao J, Liu J, Li N et al (2016) Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: adsorption behavior and process study. Chem Eng J 304:737–746. https://doi.org/10.1016/j.cej.2016.07.00310.1016/j.cej.2016.07.003 ↗
76. Zhu H-Y, Fu Y-Q, Jiang R et al (2011) Adsorption removal of congo red onto magnetic cellulose/Fe3O4/activated carbon composite: equilibrium, kinetic and thermodynamic studies. Chem Eng J 173:494–502. https://doi.org/10.1016/j.cej.2011.08.02010.1016/j.cej.2011.08.020 ↗