journal article·2020-09

Preparation and oil adsorption properties of hydrophobic microcrystalline cellulose aerogel

Yifan Zhao, Kai Zhong, Wei Liu, Sheng Cui, Ya Zhong, Shengjun Jiang

Cellulose· Volume 27· Issue 13
Publisher page

Abstract

Hydrophobic microcrystalline cellulose (MCC) aerogel is synthesized using microcrystalline cellulose and NaOH/urea solution as precursors through the sol–gel route and alkylation hydrophobic coagulation bath. Especially, the effects of different drying modes and content of MCC on the physical chemistry properties are investigated. The results show that samples using nano-self-assembly method combined supercritical CO2 drying possess loose and uniform porous three-dimensional network structure. The specific surface areas before and after modification are 180.28 m2/g and 154.37 m2/g with average pore sizes at 22.58 nm and 25.71 nm. The hydrophobic angle is up to 154.3°, the maximum adsorption efficiency can reach 12 g/g, which is also of reusability after 5 adsorption tests. This hydrophobic MCC aerogel has excellent adsorption performance, and simple, rapid, effective oil contamination treatment which is of use in oil adsorption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Surface Modification and Superhydrophobicity · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Benner J et al (2013) Is biological treatment a viable alternative for micropollutant removal in drinking water treatment processes? Water Res 47:5955–5976. https://doi.org/10.1016/j.watres.2013.07.01510.1016/j.watres.2013.07.015 ↗
2. Bohn PW, Mariñas BJ, Georgiadis JG, Mayes AM, Shannon MA, Elimelech M (2008) Science and technology for water purification in the coming decades. Nature 452:301–310. https://doi.org/10.1038/nature0659910.1038/nature06599 ↗
3. Cai J, Zhang L (2005) Rapid dissolution of cellulose in LiOH/urea and NaOH/urea aqueous solutions. Macromol Biosci 5:539–548. https://doi.org/10.1002/mabi.20040022210.1002/mabi.200400222 ↗
4. Chaudhary JP, Vadodariya N, Nataraj SK, Meena R (2015) Chitosan-based aerogel membrane for robust oil-in-water emulsion separation. ACS Appl Mater Interfaces 7:24957–24962. https://doi.org/10.1021/acsami.5b0870510.1021/acsami.5b08705 ↗
5. Chu Z, Feng Y, Seeger S (2015) Oil/water separation with selective superantiwetting/superwetting surface materials. Angew Chem Int Ed 54:2328–2338. https://doi.org/10.1002/anie.20140578510.1002/anie.201405785 ↗
6. Cui S et al (2018) Preparation of magnetic MnFe2O4-Cellulose aerogel composite and its kinetics and thermodynamics of Cu(II) adsorption. Cellulose 25:735–751. https://doi.org/10.1007/s10570-017-1598-x10.1007/s10570-017-1598-x ↗
7. Dai J et al (2018) 3D macroscopic superhydrophobic magnetic porous carbon aerogel converted from biorenewable popcorn for selective oil-water separation. Mater Design 139:122–131. https://doi.org/10.1016/j.matdes.2017.11.00110.1016/j.matdes.2017.11.001 ↗
8. Fan P et al (2017) Facile and green fabrication of cellulosed based aerogels for lampblack filtration from waste newspaper. Carbohydr Polym 162:108–114. https://doi.org/10.1016/j.carbpol.2017.01.01510.1016/j.carbpol.2017.01.015 ↗
9. Ghanbari F, Moradi M (2017) Application of peroxymonosulfate and its activation methods for degradation of environmental organic pollutants: review. Chem Eng J 310:41–62. https://doi.org/10.1016/j.cej.2016.10.06410.1016/j.cej.2016.10.064 ↗
10. Gupta RK, Dunderdale GJ, England MW, Hozumi A (2017) Oil/water separation techniques: a review of recent progresses and future directions. J Mater Chem A 5:16025–16058. https://doi.org/10.1039/C7TA02070H10.1039/C7TA02070H ↗
11. Ibrahim S, Wang S, Ang HM (2010) Removal of emulsified oil from oily wastewater using agricultural waste barley straw. Biochem Eng J 49:78–83. https://doi.org/10.1016/j.bej.2009.11.01310.1016/j.bej.2009.11.013 ↗
12. Li H, Liu L, Yang F (2012) Hydrophobic modification of polyurethane foam for oil spill cleanup. Mar Pollut Bull 64:1648–1653. https://doi.org/10.1016/j.marpolbul.2012.05.03910.1016/j.marpolbul.2012.05.039 ↗
13. Li B, Liu X, Zhang X, Zou J, Chai W, Lou Y (2015) Rapid adsorption for oil using superhydrophobic and superoleophilic polyurethane sponge. J Chem Technol Biotechnol 90:2106–2112. https://doi.org/10.1002/jctb.464610.1002/jctb.4646 ↗
14. Loow Y, New EK, Yang GH, Ang LY, Foo LYW, Wu TY (2017) Potential use of deep eutectic solvents to facilitate lignocellulosic biomass utilization and conversion. Cellulose 24:3591–3618. https://doi.org/10.1007/s10570-017-1358-y10.1007/s10570-017-1358-y ↗
15. Maiti S, Mishra IM, Bhattacharya SD, Joshi JK (2011) Removal of oil from oil-in-water emulsion using a packed bed of commercial resin. Colloids Surf A 389:291–298. https://doi.org/10.1016/j.colsurfa.2011.07.04110.1016/j.colsurfa.2011.07.041 ↗
16. Misra P, Chitanda JM, Dalai AK, Adjaye J (2016) Selective removal of nitrogen compounds from gas oil using functionalized polymeric adsorbents: efficient approach towards improving denitrogenation of petroleum feedstock. Chem Eng J 295:109–118. https://doi.org/10.1016/j.cej.2016.03.02410.1016/j.cej.2016.03.024 ↗
17. Rafieian F, Hosseini M, Jonoobi M, Yu Q (2018) Development of hydrophobic nanocellulose-based aerogel via chemical vapor deposition for oil separation for water treatment. Cellulose 25:4695–4710. https://doi.org/10.1007/s10570-018-1867-310.1007/s10570-018-1867-3 ↗
18. Rajakovic V, Aleksic G, Radetic M, Rajakovic L (2007) Efficiency of oil removal from real wastewater with different sorbent materials. J Hazard Mater 143:494–499. https://doi.org/10.1016/j.jhazmat.2006.09.06010.1016/j.jhazmat.2006.09.060 ↗
19. Shah MS, Tsapatsis M, Siepmann JI, Energy FRCE (2017) Hydrogen sulfide capture: from absorption in polar liquids to oxide, zeolite, and metal-organic framework adsorbents and membranes. Chem Rev 117:9755–9803. https://doi.org/10.1021/acs.chemrev.7b0009510.1021/acs.chemrev.7b00095 ↗
20. Shakeri H, Arshadi M, Salvacion JWL (2016) Removal of BTEX by using a surfactant—Bio originated composite. J Colloid Interfaces Sci 466:186–197. https://doi.org/10.1016/j.jcis.2015.12.01910.1016/j.jcis.2015.12.019 ↗
21. Shavandi MA, Haddadian Z, Ismail MHS, Abdullah N, Abidin ZZ (2012) Removal of residual oils from palm oil mill effluent by adsorption on natural zeolite water. Air Soil Pollut 223:4017–4027. https://doi.org/10.1007/s11270-012-1169-610.1007/s11270-012-1169-6 ↗
22. Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459–494. https://doi.org/10.1007/s10570-010-9405-y10.1007/s10570-010-9405-y ↗
23. Srinivasan A, Viraraghavan T (2010) Oil removal from water using biomaterials. Bioresource Technol 101:6594–6600. https://doi.org/10.1016/j.biortech.2010.03.07910.1016/j.biortech.2010.03.079 ↗
24. Sun F, Liu W, Dong Z, Deng Y (2017) Underwater superoleophobicity cellulose nanofibril aerogel through regioselective sulfonation for oil/water separation. Chem Eng J 330:774–782. https://doi.org/10.1016/j.cej.2017.07.14210.1016/j.cej.2017.07.142 ↗
25. Teo N, Gu Z, Jana SC (2018) Polyimide-based aerogel foams, via emulsion-templating. Polymer 157:95–102. https://doi.org/10.1016/j.polymer.2018.10.03010.1016/j.polymer.2018.10.030 ↗
26. Wang J, Wang H (2018) Facile synthesis of flexible mesoporous aerogel with superhydrophobicity for efficient removal of layered and emulsified oil from water. J Colloid Interfaces Sci 530:372–382. https://doi.org/10.1016/j.jcis.2018.07.00210.1016/j.jcis.2018.07.002 ↗
27. Wang X, Jiang S, Cui S, Tang Y, Pei Z, Duan H (2019) Magnetic-controlled aerogels from carboxylated cellulose and MnFe2O4 as a novel adsorbent for removal of Cu(II). Cellulose 26:5051–5063. https://doi.org/10.1007/s10570-019-02444-710.1007/s10570-019-02444-7 ↗
28. Yan J, Hu J, Yang R, Zhao W (2018) A new nanofibrillated and hydrophobic grafted dietary fibre derived from bamboo leaves: enhanced physicochemical properties and real adsorption capacity of oil. Int J Food Sci Technol 53:2394–2404. https://doi.org/10.1111/ijfs.1383210.1111/ijfs.13832 ↗
29. Yang X, Cranston ED (2014) Chemically cross-linked cellulose nanocrystal aerogels with shape recovery and superabsorbent properties. Chem Mater 26:6016–6025. https://doi.org/10.1021/cm502873c10.1021/cm502873c ↗
30. Yang J, Xia Y, Xu P, Chen B (2018) Super-elastic and highly hydrophobic/superoleophilic sodium alginate/cellulose aerogel for oil/water separation. Cellulose 25:3533–3544. https://doi.org/10.1007/s10570-018-1801-810.1007/s10570-018-1801-8 ↗
31. Zadaka-Amir D, Bleiman N, Mishael YG (2013) Sepiolite as an effective natural porous adsorbent for surface oil-spill. Micropor Mesopor Mat 169:153–159. https://doi.org/10.1016/j.micromeso.2012.11.00210.1016/j.micromeso.2012.11.002 ↗