journal article·2016-06

Optimization of sulfuric acid hydrolysis conditions for preparation of nanocrystalline cellulose from enzymatically pretreated fibers

Facundo Beltramino, M. Blanca Roncero, Antonio L. Torres, Teresa Vidal, Cristina Valls

Cellulose· Volume 23· Issue 3
Publisher page

Abstract

NCC preparation using sulfuric acid hydrolysis from cellulase pretreated fibers was optimized in order to obtain the highest possible yield with 62% and 65% wt. sulfuric acid throughout two statistical plans. At optimal conditions (10U/g odp cellulase, 25 min hydrolysis, 47 ºC and 62 % wt. H2SO4) high yields were obtained (=80%) including an increase produced by enzyme of ~9 %. Optimal conditions produced nanosized particles of around ~200 nm with a reduced surface charge and sulfur content. The performed optimization allowed reducing the hydrolysis time in a 44%, and also increasing yield in more than 10% compared to results exposed in previous works. The effects of cellulase pretreatment were noticeable even under aggressive hydrolysis conditions, emphasizing its possibilities. Zeta potential and polydispersity indexes indicated that all studied conditions leaded to good quality final products, with values among -50 mV and 0.2, respectively. TEM analysis confirmed the presence of NCC and suggested morphological differences between samples. Finally FTIR analysis provided evidence that cellulase treatment increased crystallinity of both cellulose fibers and NCC, and also increased accessibility to fibers, supporting data obtained from NCC
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Biofuel production and bioconversion · Enzyme Production and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Abitbol T, Kloser E, Gray DG (2013) Estimation of the surface sulfur content of cellulose nanocrystals prepared by sulfuric acid hydrolysis. Cellulose 20:785–79410.1007/s10570-013-9871-0 ↗
2. Ahola S, Turon X, Osterberg M et al (2008) Enzymatic hydrolysis of native cellulose nanofibrils and other cellulose model films: effect of surface structure. Langmuir 24:11592–11599. doi: 10.1021/la801550j10.1021/la801550j ↗
3. Alves L, Medronho B, Antunes FE et al (2014) Unusual extraction and characterization of nanocrystalline cellulose from cellulose derivatives. J Mol Liq. doi: 10.1016/j.molliq.2014.12.010
4. Anderson SR, Esposito D, Gillette W et al (2014) Enzymatic preparation of nanocrystalline and microcrystalline cellulose. Tappi J 13:35–4210.32964/TJ13.5.35 ↗
5. Beltramino F, Roncero MB, Vidal T et al (2015a) Increasing yield of nanocrystalline cellulose preparation process by a cellulase pretreatment. Bioresour Technol 192:574–581. doi: 10.1016/j.biortech.2015.06.00710.1016/j.biortech.2015.06.007 ↗
6. Beltramino F, Valls C, Vidal T, Roncero MB (2015b) Exploring the effects of treatments with carbohydrases to obtain a high-cellulose content pulp from a non-wood alkaline pulp. Carbohydr Polym 133:302–312. doi: 10.1016/j.carbpol.2015.07.01610.1016/j.carbpol.2015.07.016 ↗
7. Brinchi L, Cotana F, Fortunati E, Kenny JM (2013) Production of nanocrystalline cellulose from lignocellulosic biomass: technology and applications. Carbohydr Polym 94:154–169. doi: 10.1016/j.carbpol.2013.01.03310.1016/j.carbpol.2013.01.033 ↗
8. Chen L, Wang Q, Hirth K et al (2015) Tailoring the yield and characteristics of wood cellulose nanocrystals (CNC) using concentrated acid hydrolysis. Cellulose. doi: 10.1007/s10570-015-0615-1
9. Dong XM, Revol J-F, Gray DG (1998) Effect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose. Cellulose 5:19–3210.1023/A:1009260511939 ↗
10. Fahma F, Iwamoto S, Hori N et al (2010) Isolation, preparation, and characterization of nanofibers from oil palm empty-fruit-bunch (OPEFB). Cellulose 17:977–985. doi: 10.1007/s10570-010-9436-410.1007/s10570-010-9436-4 ↗
11. Fan JS, Li YH (2012) Maximizing the yield of nanocrystalline cellulose from cotton pulp fiber. Carbohydr Polym 88:1184–1188. doi: 10.1016/j.carbpol.2012.01.08110.1016/j.carbpol.2012.01.081 ↗
12. Filson PB, Dawson-Andoh BE, Schwegler-Berry D (2009) Enzymatic-mediated production of cellulose nanocrystals from recycled pulp. Green Chem 11:1808. doi: 10.1039/b915746h10.1039/b915746h ↗
13. Fraschini C, Chauve G, Le Berre J-F et al (2014) Critical discussion of light scattering and microscopy techniques for CNC particle sizing. Nord Pulp Pap Res J 29:31–4010.3183/NPPRJ-2014-29-01-p031-040 ↗
14. French AD, Santiago Cintrón M (2013) Cellulose polymorphy, crystallite size, and the Segal Crystallinity Index. Cellulose 20:583–588. doi: 10.1007/s10570-012-9833-y10.1007/s10570-012-9833-y ↗
15. Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500. doi: 10.1021/cr900339w10.1021/cr900339w ↗
16. Hubbe MA, Rojas OJ, Lucia LA, Sain M (2008) Cellulosic nanocomposites: a review. BioResources 3:929–98010.15376/biores.3.3.929-980 ↗
17. Klemm D, Kramer F, Moritz S et al (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50:5438–5466. doi: 10.1002/anie.20100127310.1002/anie.201001273 ↗
18. Lin N, Dufresne A (2014) Nanocellulose in biomedicine: current status and future prospect. Eur Polym J 59:302–325. doi: 10.1016/j.eurpolymj.2014.07.02510.1016/j.eurpolymj.2014.07.025 ↗
19. Lu P, Hsieh Y-L (2010) Preparation and properties of cellulose nanocrystals: rods, spheres, and network. Carbohydr Polym 82:329–336. doi: 10.1016/j.carbpol.2010.04.07310.1016/j.carbpol.2010.04.073 ↗
20. Martínez-Sanz M, Vicente AA, Gontard N et al (2015) On the extraction of cellulose nanowhiskers from food by-products and their comparative reinforcing effect on a polyhydroxybutyrate-co-valerate polymer. Cellulose 22:535–551. doi: 10.1007/s10570-014-0509-710.1007/s10570-014-0509-7 ↗
21. Moon RJ, Martini A, Nairn J et al (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–3994. doi: 10.1039/c0cs00108b10.1039/c0cs00108b ↗
22. Nelson ML, O’Connor RT (1964) Relation of certain infrared bands to cellulose crystallinity and crystal lattice type. Part II. A new infrared ratio for estimation of crystallinity in celluloses I and II. J Appl Polym Sci 8:1325–1341. doi: 10.1002/app.1964.07008032310.1002/app.1964.070080323 ↗
23. Neto WPF, Silvério HA, Dantas NO, Pasquini D (2013) Extraction and characterization of cellulose nanocrystals from agro-industrial residue - Soy hulls. Ind Crops Prod 42:480–488. doi: 10.1016/j.indcrop.2012.06.04110.1016/j.indcrop.2012.06.041 ↗
24. O’Connor RT, DuPré EF, Mitcham D (1958) Applications of infrared absorption spectroscopy to investigations of cotton and modified cottons part I: physical and crystalline modifications and oxidation. Text Res J 28:382–392. doi: 10.1177/00405175580280050310.1177/004051755802800503 ↗
25. Quintana E, Valls C, Vidal T, Roncero MB (2015a) Comparative evaluation of the action of two different endoglucanases. Part II: on a biobleached acid sulphite pulp. Cellulose 22:2081–2093. doi: 10.1007/s10570-015-0631-110.1007/s10570-015-0631-1 ↗
26. Quintana E, Valls C, Vidal T, Roncero MB (2015b) Comparative evaluation of the action of two different endoglucanases. Part I: on a fully bleached, commercial acid sulfite dissolving pulp. Cellulose. doi: 10.1007/s10570-015-0623-1
27. Roman M, Winter WT (2004) Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose. Biomacromolecules 5:1671–1677. doi: 10.1021/bm034519+10.1021/bm034519+ ↗
28. Široký J, Blackburn RS, Bechtold T et al (2010) Attenuated total reflectance Fourier-transform infrared spectroscopy analysis of crystallinity changes in lyocell following continuous treatment with sodium hydroxide. Cellulose 17:103–115. doi: 10.1007/s10570-009-9378-x10.1007/s10570-009-9378-x ↗
29. Spiridon I, Teaca C-A, Bodîrlau R (2010) Structural changes evidenced by FTIR spectroscopy in cellulosic materials after pre-treatment with ionic liquid and enzymatic hydrolysis. BioResources 6:400–41310.15376/biores.6.1.400-413 ↗
30. Tanaka R, Saito T, Ishii D, Isogai A (2014) Determination of nanocellulose fibril length by shear viscosity measurement. Cellulose 21:1581–1589. doi: 10.1007/s10570-014-0196-410.1007/s10570-014-0196-4 ↗
31. Teixeira RSS, da Silva AS, Jang J-H et al (2015) Combining biomass wet disk milling and endoglucanase/β-glucosidase hydrolysis for the production of cellulose nanocrystals. Carbohydr Polym 128:75–81. doi: 10.1016/j.carbpol.2015.03.08710.1016/j.carbpol.2015.03.087 ↗
32. Thielemans W, Warbey CR, Walsh DA (2009) Permselective nanostructured membranes based on cellulose nanowhiskers. Green Chem 11:531–537. doi: 10.1039/b818056c10.1039/b818056c ↗
33. Valls C, Roncero MB (2009) Using both xylanase and laccase enzymes for pulp bleaching. Bioresour Technol 100:2032–2039. doi: 10.1016/j.biortech.2008.10.00910.1016/j.biortech.2008.10.009 ↗
34. Valls C, Colom JF, Baffert C et al (2010) Comparing the efficiency of the laccase–NHA and laccase–HBT systems in eucalyptus pulp bleaching. Biochem Eng J 49:401–407. doi: 10.1016/j.bej.2010.02.00210.1016/j.bej.2010.02.002 ↗
35. Wang QQ, Zhu JY, Reiner RS et al (2012) Approaching zero cellulose loss in cellulose nanocrystal (CNC) production: recovery and characterization of cellulosic solid residues (CSR) and CNC. Cellulose 19:2033–2047. doi: 10.1007/s10570-012-9765-610.1007/s10570-012-9765-6 ↗
36. Yanamala N, Farcas M (2014) In vivo evaluation of the pulmonary toxicity of cellulose nanocrystals: a renewable and sustainable nanomaterial of the future. ACS Sustain Chem Eng 2:1691–169810.1021/sc500153k ↗