Direct solvent nanowelding of cellulose fibers to make all-cellulose nanocomposite
Source abstract
Abstract
Highly purified cellulose fibers were directly welded at nanoscale using dimethyl acetamide containing lithium chloride (DMAc/LiCl) solvent. For welding fibers directly at nanoscale, lignin and hemicelluloses were first removed from the nano-disconnection between laterally adjacent nanofibrils through proper bleaching; hence, nano-scale pores were created between lateral nanofibrils. The solvent penetrated deeply into these pores, making disordered chains to freely move onto the outer part of nanofibrils leaving the nanofibril core undissolved. During solvent rinsing and drying, the disordered chains entangled and re-solidified, acting as a weld layer joining undissolved nanofibril cores (averagely 38 nm in diameter): through which a nano-welded sheet (NWS-1) was prepared directly from the microscale cellulose fibers. The physical and mechanical properties of NWS-1 had dramatically improved compared to those of fiber sheets. For comparison, cellulose fibers were also indirectly welded at nanoscale; the highly purified cellulose fibers were first ground to nanofibers (averagely 32 nm in diameter), which were afterwards partially dissolved in DMAc/LiCl to indirectly prepare nano-welded sheet (NWS-2). The undissolved nanofiber cores of NWS-2 had a diameter of 26 nm on average. The NWS-1 and NWS-2, so-called all-cellulose nanocomposites, showed the same structures at macro-, micro- and nanoscales with the same functional properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Nanocomposite Films for Food Packaging · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Afra E, Yousefi H, Hadilam MM, Nishino T (2013) Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps. Carbohydr Polym 97:725–73010.1016/j.carbpol.2013.05.032 ↗
2. Ahmadi M, Latibari AJ, Faezipour M, Hedjazi S (2010) Neutral sulfite semi-chemical pulping of rapeseed residues. Turk J Agric For 34:11–16
3. Aulin C, Gällstedt M, Lindström T (2010) Oxygen and oil barrier properties of microfibrillated cellulose films and coatings. Cellulose 17:559–57410.1007/s10570-009-9393-y ↗
4. Changxin C, Yafei Z (2009) Nanowelded carbon nanotubes. Springer, New York
5. Ghaderi M, Mousavi M, Yousefi H, Labbafi M (2014) All-cellulose nanocomposite film made from bagasse cellulose nanofibers for food packaging application. Carbohydr Polym 104:59–6510.1016/j.carbpol.2014.01.013 ↗
6. Gindl W, Keckes J (2005) All-cellulose nanocomposite. Polymer 46:10221–1022510.1016/j.polymer.2005.08.040 ↗
7. Guo WK (2009) A review of micro/nano welding and its future developments. Recent Pat nanotechnol 3:53–6010.2174/187221009787003320 ↗
8. Haverhals LM, Reichert WM, Long HCD, Trulove PC (2010) Natural fiber welding. Macromol Mater Eng 295:425–43010.1002/mame.201090008 ↗
9. Henriksson M, Berglund L, Isaksson P, Lindstrom T, Nishino T (2008) Cellulose nanopaper structures of high toughness. Biomacromolecules 9:1579–158510.1021/bm800038n ↗
10. Isogai T, Saito T, Isogai A (2011) Wood cellulose nanofibrils prepared by TEMPO electro-mediated oxidation. Cellulose 18:421–43110.1007/s10570-010-9484-9 ↗
11. Jonoobi M, Harun J, Tahir PM, Ziani LH, Azry SS, Makinejad MD (2010) Characteristics of nanofibers extracted from kenaf core. Bioresources 5:2556–256610.15376/biores.5.4.2556-2566 ↗
12. Lewin M (2007) Handbook of fiber chemistry, 3rd edn. CRC, New York
13. Mashkour M, Tajvidi M, Kimura T, Kimura F, Ebrahimi G (2011) Fabricating unidirectional magnetic papers using permanent magnets to align magnetic nanoparticles covered natural cellulose fibers. Bioresources 6:4731–473810.15376/biores.6.4.4731-4738 ↗
14. Mashkour M, Kimura T, Kimura F, Mashkour M, Tajvidi M (2013) Tunable self-assembly of cellulose nanowhiskers and polyvinyl alcohol chains induced by surface tension torque (STT). Biomacromolecules. doi: 10.1021/bm401287s
15. Mashkour M, Tajvidi M, Kimura F, Yousefi H, Kimura T (2014) Strong Highly Anisotropic Magneto-cellulose Nanocomposite Films Made by Chemical Peeling and In-situ Welding at Interface using Ionic Liquid. ACS Appl Mater Interfaces. doi: 10.1021/am500709t
16. Matsumura H, Sugiyama J, Glasser WG (2000) Cellulosic nanocomposites I. Thermally deformable cellulose hexanoates from heterogeneous reaction. J Appl Polym Sci 78:2242–225310.1002/1097-4628(20001220)78:13<2242::AID-APP20>3.0.CO;2-5 ↗
17. Nishino T, Arimoto N (2007) All-cellulose composite prepared by selective dissolving of fiber surface. Biomacromolecules 8:2712–271610.1021/bm0703416 ↗
18. Nishino T, Matsuda I, Hirao K (2004) All-cellulose composite. Macromolecules 37:7683–768710.1021/ma049300h ↗
19. Nishiyama Y, Kim UJ, Kim DY, Katsumata KS, May RP, Langan P (2003) Periodic disorder along ramie cellulose microfibrils. Biomacromolecules 4:1013–101710.1021/bm025772x ↗
20. Nogi M, Iwamoto S, Nakagaito NA, Yano H (2009) Optically transparent nanofiber paper. Adv Mater 21:1595–159810.1002/adma.200803174 ↗
21. Rezayati Charani P, Dehghani-Firouzabadi M, Afra E, Shakeri A (2013) Rheological characterization of high concentrated MFC gel from Kenaf unbleached pulp. Cellulose 20:727–74010.1007/s10570-013-9862-1 ↗
22. Sehaqui H, Zhou Q, Ikkala O, Berglund LA (2011) Strong and tough cellulose nanopaper with high specific surface area and porosity. Biomacromolecules 12:3638–364410.1021/bm2008907 ↗
23. Siro I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459–49410.1007/s10570-010-9405-y ↗
24. Soykeabkaew N, Sian C, Gea S, Nishino T, Peijs T (2009) All-cellulose nanocomposites by surface selective dissolution of bacterial cellulose. Cellulose 16:435–44410.1007/s10570-009-9285-1 ↗
25. Swatloski RP, Spear SK, Holbrey JD, Rogers RD (2002) Dissolution of cellulose with ionic liquids. J Am Chem Soc 124:4974–497510.1021/ja025790m ↗
26. Syverud K, Stenius P (2009) Strength and barrier properties of MFC films. Cellulose 16:75–8510.1007/s10570-008-9244-2 ↗
27. Troughton MJ (2008) Handbook of plastics joining: a practical guide. William Andrew Inc., New York
28. Tsai SH, Shiu CT, Jong WJ, Shih HC (2000) The welding of carbon nanotubes. Carbon 38:1899–190210.1016/S0008-6223(00)00150-0 ↗
29. Yousefi H (2011a) Direct fabrication of nanocomposite using solvent nanowelding of cellulose fibers. PhD Dissertation, University of Tehran
30. Yousefi H, Faezipour M, Nishino T, Shakeri A, Ebrahimi G (2011a) All-cellulose composite and nanocomposite made from partially dissolved fibers and nanofibers of canola straw. Polym J 43:559–56410.1038/pj.2011.31 ↗
31. Yousefi H, Nishino T, Faezipour M, Ebrahimi G, Shakeri A (2011b) Direct fabrication of all-cellulose nanocomposite using ionic liquid based nanowelding. Biomacromolecules 12:4080–408510.1021/bm201147a ↗
32. Yousefi H, Nishino T, Faezipour M, Ebrahimi G (2012) Cellulose nanowelding. In: proceedings of the seventh international workshop on green composites (IWGC-7), August 28–30, Hamamatsu, Japan, pp 159–162
33. Yousefi H, Faezipour M, Hedjazi S, Mousavi MM, Azusa Y, Heidari AH (2013a) Comparative study of paper and nanopaper properties prepared from bacterial cellulose nanofibers and fibers/ground cellulose nanofibers of canola straw. Ind Crop Prod 43:732–73710.1016/j.indcrop.2012.08.030 ↗
34. Yousefi H, Nishino T, Shakeri A, Faezipour M, Ebrahimi G, Kotera M (2013b) Water-repellent all-cellulose nanocomposite using silane coupling treatment. J Adh, Sci Technol, pp 1324–1334