journal article·2018-07Open access

In-situ analysis of polyelectrolyte complexes by flow cytometry

Anders Strand, Lari Vähäsalo, Annika Ketola, Kristian Salminen, Elias Retulainen, Anna Sundberg

Cellulose· Volume 25· Issue 7

Abstract

Polyelectrolyte complexes (PECs) from common papermaking additives were prepared at different cation/anion ratios, resulting in colloidal light scattering particles. The polycations were cationic starches and polyDADMACs, while the polyanions were different carboxymethyl celluloses. The PECs were studied by turbidity measurements, as well as by flow cytometry (FCM). Turbidity maxima were detected close to the theoretical neutralization point of the polycation and polyanion. The turbidity response of the PEC mixtures varied with polyelectrolyte charge density. The PECs were in most cases quite stable over 24 h, but certain combinations resulted in unstable particles over time. Flow cytometry of PECs revealed clear populations of hydrophilic particles. The light scattering properties of PECs in side direction (SSC) and forward direction (FSC) were recorded for the different PEC combinations. The determined FSC and SSC offered information about very different PEC properties, and a new term was suggested for better understanding the mechanisms behind PEC formation; FSC/SSC. It was suggested that the determined FSC/SSC values were connected to the structural density of different particles. The premise was tested by analyses of solid, dense particles as well as swollen, soft particles. In addition to this, the hydrophobicity of PECs was determined by FCM. It was seen that the PECs were quite hydrophilic overall and that the measured hydrophobicities were lowest around the theoretical point of neutralization. Finally, the behavior of a coagulating PEC mixture as a function of contact time was studied with FCM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Surface Interaction Studies · Advanced Cellulose Research Studies · Microplastics and Plastic Pollution

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Abe K, Koide M, Tsuchida E (1977) Hydrophobicities in the domains of polyelectrolytes. J Polym Sci, Part A: Polym Chem 15:2469–2477. https://doi.org/10.1002/pol.1977.17015101610.1002/pol.1977.170151016 ↗
2. Ankerfors C, Wågberg L (2013) Polyelectrolyte complexes for tailoring of wood fibre surfaces. In: Müller M (ed) Polyelectrolyte complexes in the dispersed and solid state II. Springer, Berlin Heidelberg, pp 1–24. https://doi.org/10.1007/12_2012_20610.1007/12_2012_206 ↗
3. Beck-Candanedo S, Roman M, Gray D (2005) Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions. Biomacromol 6:1048–1054. https://doi.org/10.1021/bm049300p10.1021/bm049300p ↗
4. Beghello L, Long L, Eklund D (1997) Laboratory study on carboxymethylcellulose as a wet-end additive in paperboard making. Pap Puu 79:55–57
5. Buchhammer H-M, Kramer G, Lunkwitz K (1995) Interaction of colloidal dispersions of non-stoichiometric polyelectrolyte complexes and silica particles. Colloids Surf A 95:299–304. https://doi.org/10.1016/0927-7757(94)03036-Y10.1016/0927-7757(94)03036-Y ↗
6. Chen J, Heitmann A, Hubbe M (2003) Dependency of polyelectrolyte complex stoichiometry on the order of addition. 1. Effect of salt concentration during streaming current titrations with strong poly-acid and poly-base. Colloids Surf A 223:215–230. https://doi.org/10.1016/S0927-7757(03)00222-X10.1016/S0927-7757(03)00222-X ↗
7. Dautzenberg H (1997) Polyelectrolyte complex formation in highly aggregating systems. 1. Effect of salt: polyelectrolyte complex formation in the presence of NaCl. Macromolecules 30:7810–7815. https://doi.org/10.1021/ma970803f10.1021/ma970803f ↗
8. Dautzenberg H (2000) Polyelectrolyte complex formation: role of a double hydrophilic polymer. Macromol Chem Phys 201:1765–1773. https://doi.org/10.1002/1521-3935(20000901)201:14<1765:AID-MACP1765>3.0.CO;2-W10.1002/1521-3935(20000901)201:14<1765::AID-MACP1765>3.0.CO;2-W ↗
9. Dautzenberg H, Karibyants N (1999) Polyelectrolyte complex formation in highly aggregating systems. Effect of salt: response to subsequent addition of NaCl. Macromol Chem Phys 200:118–125. https://doi.org/10.1002/(SICI)1521-3935(19990101)200:1<118::AID-MACP118>3.0.CO;2-K10.1002/(SICI)1521-3935(19990101)200:1<118::AID-MACP118>3.0.CO;2-K ↗
10. De Vasconcelos C, Bezerril P, Dos Santos D, Dantas T, Pereira M, Fonseca J (2006) Effect of molecular weight and ionic strength on the formation of polyelectrolyte complexes based on poly(methacrylic acid) and chitosan. Biomacromol 7:1245–1252. https://doi.org/10.1021/bm050963w10.1021/bm050963w ↗
11. Decher G (1997) Fuzzy nanoassemblies: toward layered polymeric multicomposites. Science 277:1232–1237. https://doi.org/10.1126/science.277.5330.123210.1126/science.277.5330.1232 ↗
12. Dragan S, Cristea M (2001) Influence of low-molecular-weight salts on the formation of polyelectrolyte complexes based on polycations with quaternary ammonium salt groups in the main chain and poly(sodium acrylate). Eur Polym J 37:1571–1575. https://doi.org/10.1016/S0014-3057(01)00025-810.1016/S0014-3057(01)00025-8 ↗
13. Feng X, Leduc M, Pelton R (2008) Polyelectrolyte complex characterization with isothermal titration calorimetry and colloid titration. Colloids Surf A 317:535–542. https://doi.org/10.1016/j.colsurfa.2007.11.05310.1016/j.colsurfa.2007.11.053 ↗
14. Fleer G, Cohen Stuart M, Scheutjens J, Cosgrove T, Vincent B (1993) Electrostatic effects: charged surfaces and polyelectrolyte adsorption. In: Polymers at interfaces, 1st edn. Chapman & Hall, London, pp 343–375
15. Fornue E, Allan G, Quinones H, Gonzalez G, Saucedo J (2011) Fundamental aspects of adhesion between cellulosic surfaces in contact—a review. Papel 72:85–90
16. Fredriksson H, Silverio J, Andersson R, Eliasson A-C, Aman P (1998) The influence of amylose and amylopectin characteristics on gelatinization and retrogradation properties of different starches. Carbohydr Polym 35:119–13410.1016/S0144-8617(97)00247-6 ↗
17. Gärdlund L, Forsström J, Andreasson B, Wågberg L (2005) Influence of polyelectrolyte complexes on the strength properties of papers from unbleached kraft pulps with different yields. Nord Pulp Pap Res J 20:36–42. https://doi.org/10.3183/NPPRJ-2005-20-01-p036-04210.3183/NPPRJ-2005-20-01-p036-042 ↗
18. Gernandt R, Wågberg L, Gärdlund L, Dautzenberg H (2003) Polyelectrolyte complexes for surface modification of wood fibres: I. Preparation and characterisation of complexes for dry and wet strength improvement of paper. Colloids Surf A 213:15–25. https://doi.org/10.1016/S0927-7757(02)00335-710.1016/S0927-7757(02)00335-7 ↗
19. Granberg H, Coppel L, Eita M, de Mayolo A, Arwin H, Wågberg L (2012) Dynamics of moisture interaction with polyelectrolyte multilayers containing nanofibrillated cellulose. Nord Pulp Pap Res J 27:496–499. https://doi.org/10.3183/NPPRJ-2012-27-02-p496-49910.3183/NPPRJ-2012-27-02-p496-499 ↗
20. Greenspan P, Fowler S (1985) Spectrofluorometric studies of the lipid probe, nile red. J Lipid Res 26:781–78910.1016/S0022-2275(20)34307-8 ↗
21. Häärä M, Konn J, Vähäsalo L, Sundberg A, Willför S (2014) Flow cytometry as a tool to assess inhibitor performance for calcium oxalate scale control. Nord Pulp Pap Res J 29:663–672. https://doi.org/10.3183/NPPRJ-2014-29-04-p663-67210.3183/NPPRJ-2014-29-04-p663-672 ↗
22. Hubbe M (2006) Bonding between cellulosic fibers in the absence and presence of dry-strength agents—a review. BioResources 1:281–318. https://doi.org/10.15376/biores.1.2.281-31810.15376/biores.1.2.281-318 ↗
23. Hubbe M, Jackson T, Zhang M (2003) Fiber surface saturation as a strategy to optimize dual-polymer dry strength treatment. Tappi J 2:7–12
24. Hubbe M, Moore S, Lee SY (2005) Effects of charge ratios and cationic polymer nature on polyelectrolyte complex deposition onto cellulose. Ind Eng Chem Res 44:3068–3074. https://doi.org/10.1021/ie048902m10.1021/ie048902m ↗
25. Jose J, Burgess K (2006) Syntheses and properties of water-soluble nile red derivatives. J Org Chem 71:7835–7839. https://doi.org/10.1021/jo061369v10.1021/jo061369v ↗
26. Kekkonen J, Lattu H, Stenius P (2001) Adsorption kinetics of complexes formed by oppositely charged polyelectrolytes. J Colloid Interface Sci 234:384–392. https://doi.org/10.1006/jcis.2000.732610.1006/jcis.2000.7326 ↗
27. Kontturi K, Tammelin T, Johansson L-S, Stenius P (2008) Adsorption of cationic starch on cellulose studied by QCM-D. Langmuir 24:4743–4749. https://doi.org/10.1021/la703604j10.1021/la703604j ↗
28. Kötz J (1993) Phase behavior of polyanion-polycation aggregates and possibilities of utilization. Nord Pulp Pap Res J 8:11–1410.3183/NPPRJ-1993-08-01-p011-014 ↗
29. Lin Z, Renneckar S (2011) Nanocomposite-based lignocellulosic fibers 3: polyelectrolyte adsorption onto heterogeneous fiber surfaces. Cellulose 18:563–574. https://doi.org/10.1007/s10570-011-9502-610.1007/s10570-011-9502-6 ↗
30. Lindberg L, Vähäsalo L, Holmbom B (2004) Flow cytometry of bacteria and wood resin particles in paper production. Nord Pulp Pap Res J 19:412–416. https://doi.org/10.3183/NPPRJ-2004-19-04-p412-41610.3183/NPPRJ-2004-19-04-p412-416 ↗
31. Lofton M, Moore S, Hubbe M, Lee SY (2005) Deposition of polyelectrolyte complexes as a mechanism for developing paper dry strength. Tappi J 4:3–8
32. Marais A, Utsel S, Gustafsson E, Wågberg L (2014) Towards a super-strainable paper using the layer-by-layer technique. Carbohydr Polym 100:218–224. https://doi.org/10.1016/j.carbpol.2013.03.04910.1016/j.carbpol.2013.03.049 ↗
33. Mende M, Petzold G, Buchhammer H-M (2002) Polyelectrolyte complex formation between poly(diallyldimethyl-ammonium chloride) and copolymers of acrylamide and sodium-acrylate. Colloid Polym Sci 280:342–351. https://doi.org/10.1007/s00396-001-0614-710.1007/s00396-001-0614-7 ↗
34. Myllytie P, Yin J, Holappa S, Laine J (2009) The effect of different polysaccharides on the development of paper strength during drying. Nord Pulp Pap Res J 24:469–477. https://doi.org/10.3183/NPPRJ-2009-24-04-p469-47710.3183/NPPRJ-2009-24-04-p469-477 ↗
35. Petzold G, Lunkwitz K (1995) The interaction between polyelectrolyte complexes made from poly(dimethyldiallylammonium chloride) (PDMDAAC) and poly(maleic acid-co-α-methylstyrene) (P(MS-α-MeSty)) and cellulosic materials. Colloids Surf A 98:225–233. https://doi.org/10.1016/0927-7757(95)03133-X10.1016/0927-7757(95)03133-X ↗
36. Petzold G, Buchhammer H-M, Lunkwitz K (1996) The use of oppositely charged polyelectrolytes as flocculants and retention aids. Colloids Surf A 119:87–92. https://doi.org/10.1016/S0927-7757(96)03740-510.1016/S0927-7757(96)03740-5 ↗
37. Philipp B, Dautzenberg H, Linow K-J, Kötz J, Dawydoff W (1989) Polyelectrolyte complexes—recent developments and open problems. Prog Polym Sci 14:91–172. https://doi.org/10.1016/0079-6700(89)90018-X10.1016/0079-6700(89)90018-X ↗
38. Piculell L, Lindman B (1992) Association and segregation in aqueous polymer/polymer, polymer/surfactant, and surfactant/surfactant mixtures: similarities and differences. Adv Colloid Interface Sci 41:149–178. https://doi.org/10.1016/0001-8686(92)80011-L10.1016/0001-8686(92)80011-L ↗
39. Renneckar S, Zhou Y (2009) Nanoscale coatings on wood: polyelectrolyte adsorption and layer-by-layer assembled film formation. ACS Appl Mater Interfaces 1:559–566. https://doi.org/10.1021/am800119q10.1021/am800119q ↗
40. Shapiro H (2003) Practical flow cytometry, 4th edn. Wiley, Hoboken10.1002/0471722731 ↗
41. Shibata I, Isogai A (2003) Depolymerization of cellouronic acid during TEMPO-mediated oxidation. Cellulose 10:151–15810.1023/A:1024051514026 ↗
42. Strand A, Lindqvist H, Vähäsalo L, Blomquist M, Sundberg A (2013) Analysis of interactions between colloidal wood pitch and various mineral particles by flow cytometry. BioResources 8:3884–3900. https://doi.org/10.15376/biores.8.3.3884-390010.15376/biores.8.3.3884-3900 ↗
43. Strand A, Khakalo A, Kouko J, Oksanen A, Ketola A, Salminen K, Rojas O, Retulainen E, Sundberg A (2017) The effect of chemical additives on the strength, stiffness and elongation potential of paper. Nord Pulp Pap Res J 32:324–335. https://doi.org/10.3183/NPPRJ-2017-32-03-p324-33510.3183/NPPRJ-2017-32-03-p324-335 ↗
44. Stratton R (1989) Dependence of sheet properties on the location of adsorbed polymer. Nord Pulp Pap Res J 4:104–11210.3183/NPPRJ-1989-04-02-p104-112 ↗
45. Sundberg A, Pranovich A, Holmbom B (2000) Distribution of anionic groups in TMP suspensions. J Wood Chem Technol 20:71–92. https://doi.org/10.1080/0277381000934962510.1080/02773810009349625 ↗
46. Tammelin T, Merta J, Johansson L-S, Stenius P (2004) Viscoelastic properties of cationic starch adsorbed on quartz studied by QCM-D. Langmuir 20:10900–10909. https://doi.org/10.1021/la048769310.1021/la0487693 ↗
47. Torgnysdotter A, Wågberg L (2006) Tailoring of fibre/fibre joints in order to avoid the negative impacts of drying on paper properties. Nord Pulp Pap Res J 21:411–418. https://doi.org/10.3183/NPPRJ-2006-21-03-p411-41810.3183/NPPRJ-2006-21-03-p411-418 ↗
48. Vähäsalo L, Holmbom B (2005) Factors affecting white pitch deposition. Nord Pulp Pap Res J 20:164–168. https://doi.org/10.3183/NPPRJ-2005-20-02-p164-16810.3183/NPPRJ-2005-20-02-p164-168 ↗
49. Vähäsalo L, Degerth R, Holmbom B (2003) The use of flow cytometry in wet end research. Pap Technol 44:45–49
50. Van de Steeg H, Cohen Stuart M, De Keizer A, Bijsterbosch B (1992) Polyelectrolyte adsorption: a subtle balance of forces. Langmuir 8:2538–2546. https://doi.org/10.1021/la00046a03010.1021/la00046a030 ↗