journal article·2021-05

Influences of dispersion media for chemically modified cellulose nanofibers on rheological and mechanical properties of cellulose nanofiber reinforced high-density polyethylene

Akihiro Sato, Tomoaki Yoshimura, Daisuke Kabusaki, Hiroaki Okumura, Yoko Homma, Hironari Sano, Fumiaki Nakatsubo, Takashi Kuboki, Hiroyuki Yano

Cellulose· Volume 28· Issue 8
Publisher page

Abstract

Cellulose nanofibers (CNFs) have exceptional mechanical and thermal properties, but the use of these materials to reinforce polyolefins is challenging. In the present study, ethanol, acetone, isopropyl alcohol (IPA) and water were used as dispersion media for alkenyl succinic anhydride-modified CNFs (ACNFs). Masterbatches were prepared from these ACNFs wetted in the various liquids and then melt-compounded with high-density polyethylene (HDPE) using a twin-screw extruder, followed by injection-molding. The morphologies of the resulting HDPE/ACNF composites were characterized using optical and electron microscopy, and the rheological and mechanical properties of these composites were also evaluated. The results showed that the storage and loss moduli as well as the tensile moduli and strength of the composites produced using the organic liquids were higher than those of the composite made using water, owing to the better dispersion of ACNFs in the HDPE matrix in the former. This improved dispersion would be expected to increase the contact area between the ACNFs and the matrix and to enhance the orientation of the HDPE molecules. IPA was found to give the highest tensile modulus and strength among the organic liquids used in this study. The tensile modulus and strength of the composite containing ACNFs produced from IPA were, respectively, four times and two times higher than those of the neat HDPE. IPA is a relatively non-toxic, inexpensive compound, and so could be readily adopted for industrial scale processing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Bashir Z, Odell JA, Keller A (1986) Stiff and strong polyethylene with shish kebab morphology by continuous melt extrusion. J Mater Sci 21:3993–400210.1007/PL00020271 ↗
2. Deng C, Gao X, Chen Z, Xue S, Shen K (2010) Study of the effect of organic clay on the shear-induced crystallization of high-density polyethylene through dynamic-packing injection molding. Polym Int 59:1660–166410.1002/pi.2899 ↗
3. Igarashi Y, Sato A, Okumura H, Nakatsubo F, Yano H (2018) Manufacturing process centered on dry-pulp direct kneading method opens a door for commercialization of cellulose nanofiber reinforced composites. Chem Eng J 354(15):563–56810.1016/j.cej.2018.08.020 ↗
4. Iwamoto S, Yamamoto S, Lee SH, Endo T (2014) Mechanical properties of polypropylene composites reinforced by surface-coated microfibrillated cellulose. Composites A 59:26–2910.1016/j.compositesa.2013.12.011 ↗
5. Kimata S, Sakurai T, Nozue Y, Kasahara T, Yamaguchi N, Karino T, Shibayama M, Kornfield JA (2007) Molecular basis of the shish-kebab morphology in polymer crystallization. Science 316:1014–101710.1126/science.1140132 ↗
6. Lindström T, Christian A (2014) Market and technical challenges and opportunities in the area of innovative new materials and composites based nanocellulosics. Scand J For Res 29(4):345–35110.1080/02827581.2014.928365 ↗
7. Miao C, Hamad WY (2013) Cellulose reinforced polymer composites and nanocomposites: a critical review. Cellulose 20(5):2221–226210.1007/s10570-013-0007-3 ↗
8. Moon RJ, Martini A (2011) Nairn J, Simonsen J, Youngblood J. Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–399410.1039/c0cs00108b ↗
9. Ning N, Fu S, Zang W, Chen F, Wang K, Deng H, Zhang Q, Fu Q (2012) Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallization. Prog Polym Sci 37(10):1425–145510.1016/j.progpolymsci.2011.12.005 ↗
10. Nishino T, Takano K, Nakamae K (1995) Elastic modulus of the crystalline regions of cellulose polymorphs. J Polym Sci Part B: Polym Phys 33(11):1647–165110.1002/polb.1995.090331110 ↗
11. Nishino T, Matsuda I, Hirao K (2004) All-cellulose composite. Macromolecules 37(20):7683–768710.1021/ma049300h ↗
12. Odell JA, Grubb DT, Keller A (1978) A new route to high modulus polyethylene by lamellar structures nucleated onto fibrous substrates with general implication for crystallization. Polymer 19(6):617–62610.1016/0032-3861(78)90113-1 ↗
13. Ogino Y, Fukushima H, Matusba G, Takahashi N, Nishida K, Kanaya T (2006) Effects of high molecular weight component on crystallization of polyethylene under shear flow. Polymer 47(15):5669–567710.1016/j.polymer.2005.08.102 ↗
14. Oksman K, Aitomäki Y, Mathew AP, Siqueira G, Zhou Q, Butylina S, Tanpichai S, Zhou X, Hooshmandet S (2016) Review of the recent developments in cellulose nanocomposite processing. Composites A 83:2–1810.1016/j.compositesa.2015.10.041 ↗
15. Saito T, Kuramae R, Wohlert J, Berglund LA, Isogai A (2012) An ultrastrong nanofibrillar biomaterial: the strength of single cellulose nanofibrils revealed via sonication-induced fragmentation. Biomacromol 14(1):248–25310.1021/bm301674e ↗
16. Sakakibara K, Yano H, Tsujii Y (2016) Surface engineering of cellulose nanofiber by adsorption of diblock copolymer dispersant for green nanocomposite materials. ACS Appl Mater Interfaces 8:24893–2490010.1021/acsami.6b07769 ↗
17. Sakakibara K, Moriki Y, Yano H, Tsujii Y (2017) Strategy for the improvement of the mechanical properties of cellulose nanofiber-reinforced high-density polyethylene nanocomposites using diblock copolymer dispersants. ACS Appl Mater Interfaces 9:44079–4408710.1021/acsami.7b13963 ↗
18. Sakurada I, Ito T, Nakamae K (1966) Elastic moduli of the crystal lattices of polymers. J Polym Sci Part C 15:75–9110.1002/polc.5070150107 ↗
19. Sano H, Yui H, Li H, Inoue T (1998) Regularly phase-separated structure in an injection-molded blend of isotactic polypropylene and high density polyethylene. Polymer 39:5265–526710.1016/S0032-3861(97)10242-7 ↗
20. Sato A, Kabusaki D, Okumura H, Nakatani T, Nakatsubo F, Yano H (2016) Surface modification of cellulose nanofibers with alkenyl succinic anhydride for high-density polyethylene reinforcement. Composites A 83:72–7910.1016/j.compositesa.2015.11.009 ↗
21. Sato A, Yoshimura T, Kabusaki D, Okumura H, Homma Y, Nakatsubo F, Yano H (2019) Multi-functional effect of alkenyl-succinic-anhydride-modified microfibrillated celluloses as reinforcement and a dispersant of CaCO3 in high-density polyethylene. Cellulose 26(11):6641–665110.1007/s10570-019-02544-4 ↗
22. Yang J, Wang C, Wang K, Zhang Q, Chen F, Du R, Fu Q (2009) Direct formation of nanohybrid shish-kebab in the injection molded bar of polyethylene/multiwalled carbon nanotubes composite. Macromolecules 42(18):7016–702310.1021/ma901266u ↗
23. Yano H, Omura H, Honma Y, Okumura H, Sano H, Nakatsubo F (2018) Designing cellulose nanofiber surface for high density polyethylene reinforcement. Cellulose 25(6):3351–336210.1007/s10570-018-1787-2 ↗
24. Zang S, Lin W, Wong CP, Bucknall DG, Kumar S (2010) Nanocomposites of carbon nanotube fibers prepared by polymer crystallization. ACS Appl Mater Interfaces 2(6):1642–164710.1021/am1001663 ↗
25. Zang K, Liu Z, Yang B, Yang W, Lu Y, Wng L, Sun N, Yang M (2011) Cylindritic structure of high-density Polyethylene molded by multi-melt multi-injection molding. Polymer 52:3871–387810.1016/j.polymer.2011.06.004 ↗