journal article·2017-09

Mechanically ground softwood fines as a raw material for cellulosic applications

Hannes Orelma, Atsushi Tanaka, Hille Rautkoski, Ilkka Nurminen, Jarmo Kouko, Antti Koponen

Cellulose· Volume 24· Issue 9
Publisher page

Abstract

Utilization of mechanically manufactured lignocellulosic fines (LCNFs) was investigated in making filaments and films. The LCNFs particles were prepared by using a mechanical grinding method with a w-profile grinding stone that produces mostly fines with dimensions in the micrometer scale. The chemical and elemental composition of the w-stone ground LCNFs particles was investigated. It was found that the mechanically manufactured material exhibited the chemical structure of native wood. The LCNFs particles had an anionic surface charge making them colloidally semi-stable in water. The short length of the fines particles prevents their effective mechanical entanglement, which sets some limitations on preparation of filaments and films. Filament manufacturing required the use of a composite approach with carboxymethyl cellulose (CMC) as a binder polymer. The filament was manufactured by using dry-jet wet spinning with aluminium sulfate crosslinking. The chemical composition, crosslinking mechanism, and mechanical properties of the composite filaments were investigated. The composite approach with CMC was also used to prepare composite films with good mechanical performance. The investigated LCNFs material could be utilized in all-lignocomposite applications with cellulose derivatives, where biodegradability and biobased characteristics are desired properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Lignin and Wood Chemistry · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Adinugraha MP, Marseno DW, Haryadi (2005) Synthesis and characterization of sodium carboxymethylcellulose from cavendish banana pseudo stem (Musa cavendishii LAMBERT). Carbohydr Polym 62:164–169. doi: 10.1016/j.carbpol.2005.07.01910.1016/j.carbpol.2005.07.019 ↗
2. Borodulina S, Kulachenko A, Galland S, Nygårds M (2012) Stress–strain curve of paper revisited. Nord Pulp Pap Res J 27:31810.3183/NPPRJ-2012-27-02-p318-328 ↗
3. Braihi AJ, Salih SI, Hashem FA, Ahmed JK (2014) Proposed cross-linking model for carboxymethyl cellulose/starch superabsorbent polymer blend. Int J Mater Sci Appl 3:363–369
4. Chitprasert P, Sudsai P, Rodklongtan A (2012) Aluminum carboxymethyl cellulose–rice bran microcapsules: enhancing survival of Lactobacillus reuteri KUB-AC5. Carbohydr Polym 90:78–86. doi: 10.1016/j.carbpol.2012.04.06510.1016/j.carbpol.2012.04.065 ↗
5. Curvelo AAS, de Carvalho AJF, Agnelli JAM (2001) Thermoplastic starch–cellulosic fibers composites: preliminary results. Carbohydr Polym 45:183–188. doi: 10.1016/S0144-8617(00)00314-310.1016/S0144-8617(00)00314-3 ↗
6. de Souza Lima MM, Borsali R (2004) Rodlike cellulose microcrystals: structure, properties, and applications. Macromol Rapid Commun 25:771–78710.1002/marc.200300268 ↗
7. Ek M (2009) Pulping chemistry and technology. Walter de Gruyter, Berlin10.1515/9783110213423 ↗
8. Fernando D, Rosenberg P, Persson E, Daniel G (2007) Fibre development during stone grinding: ultrastructural characterisation for understanding derived properties. Holzforschung 61:532–53810.1515/HF.2007.094 ↗
9. Gardner D, Tajvidi M (2016) Hydrogen bonding in wood-based materials: an update. Wood Fiber Sci 48:234–244
10. Gardner DJ, Oporto GS, Mills R, Samir MASA (2008) Adhesion and surface issues in cellulose and nanocellulose. J Adhes Sci Technol 22:545–567. doi: 10.1163/156856108X29550910.1163/156856108X295509 ↗
11. George J, Sabapathi SN (2015) Cellulose nanocrystals: synthesis, functional properties, and applications. Nanotechnol Sci Appl 8:4510.2147/NSA.S64386 ↗
12. Ghanbarzadeh B, Almasi H (2011) Physical properties of edible emulsified films based on carboxymethyl cellulose and oleic acid. Int J Biol Macromol 48:44–49. doi: 10.1016/j.ijbiomac.2010.09.01410.1016/j.ijbiomac.2010.09.014 ↗
13. Håkansson KMO, Fall AB, Lundell F et al (2014) Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments. Nat Commun. doi: 10.1038/ncomms501810.1038/ncomms5018 ↗
14. Hauru LKJ, Hummel M, Michud A, Sixta H (2014) Dry jet-wet spinning of strong cellulose filaments from ionic liquid solution. Cellulose 21:4471–4481. doi: 10.1007/s10570-014-0414-010.1007/s10570-014-0414-0 ↗
15. Hausalo T (1995) Analysis of wood and pulp carbohydrates by anion exchange chromatography with pulsed amperometric detectiontle. In: Proceedings of the 8th ISWPC. Helsinki, Finland, pp 131–136
16. Heinze T, Koschella A (2005) Solvents applied in the field of cellulose chemistry: a mini review. Polimeros 15:84–9010.1590/S0104-14282005000200005 ↗
17. Hirn U, Schennach R (2015) Comprehensive analysis of individual pulp fiber bonds quantifies the mechanisms of fiber bonding in paper. Sci Rep 5:1050310.1038/srep10503 ↗
18. Jeffries TW, Schartman R (1999) Bioconversion of secondary fiber fines to ethanol using counter-current enzymatic saccharification and co-fermentation. In: Davison BH, Finkelstein M (eds) Twentieth symposium on biotechnology for fuels and chemicals: presented as volumes 77–79 of Applied biochemistry and biotechnology proceedings of the twentieth symposium on biotechnology for fuels and chemicals held May 3–7, 1998, Gatlinburg, Tennessee. Humana Press, Totowa, pp 435–44410.1007/978-1-4612-1604-9_40 ↗
19. John DR (1950) Preparation of fibers from carboxymethylcellulose. US Patent 2,495,767, 31 Jan 1950
20. Kammiovirta K, Jaaskelainen A-S, Kuutti L et al (2016) Keratin-reinforced cellulose filaments from ionic liquid solutions. RSC Adv 6:88797–88806. doi: 10.1039/C6RA20204G10.1039/C6RA20204G ↗
21. Kangas H, Kleen M (2004) Surface chemical and morphological properties of mechanical pulp fines. Nord Pulp Pap Res J 19:191–19910.3183/NPPRJ-2004-19-02-p191-199 ↗
22. Kilpeläinen I, Xie H, King A et al (2007) Dissolution of wood in ionic liquids. J Agric Food Chem 55:9142–9148. doi: 10.1021/jf071692e10.1021/jf071692e ↗
23. Klemm D (1998) Comprehensive cellulose chemistry. Fundamentals and analytical methods, vol 1. Wiley-VCH, Weinheim
24. Klemm D, Kramer F, Moritz S et al (2011) Nanocelluloses: a new family of nature-based materials. Angew Chemie Int Ed 50:5438–546610.1002/anie.201001273 ↗
25. Laine J, Lindstrom T, Nordmark GG, Risinger G (2002) Studies on topochemical modification of cellulosic fibres. Part 2. The effect of carboxymethyl cellulose attachment on fibre swelling and paper strength. Nord Pulp Pap Res J 17:5010.3183/NPPRJ-2002-17-01-p050-056 ↗
26. Landel RF, Nielsen LE (1993) Mechanical properties of polymers and composites. CRC Press, Boca Raton10.1201/b16929 ↗
27. Li Z, Liu X, Zhuang X et al (2002) Manufacture and properties of chitosan/N, O-carboxymethylated chitosan/viscose rayon antibacterial fibers. J Appl Polym Sci 84:2049–2059. doi: 10.1002/app.1050110.1002/app.10501 ↗
28. Madani A, Zeinoddini S, Varahmi S et al (2014) Ultra-lightweight paper foams: processing and properties. Cellulose 21:2023–203110.1007/s10570-014-0197-3 ↗
29. McDonald D, Miles K, Amiri R (2004) The nature of the mechanical pulping process. Pulp Pap Can 105:27–32
30. Michud A, Tanttu M, Asaadi S et al (2016) Ioncell-F: ionic liquid-based cellulosic textile fibers as an alternative to viscose and Lyocell. Text Res J 86:543–55210.1177/0040517515591774 ↗
31. Normark M, Winestrand S, Lestander TA, Jönsson LJ (2014) Analysis, pretreatment and enzymatic saccharification of different fractions of Scots pine. BMC Biotechnol 14:20. doi: 10.1186/1472-6750-14-2010.1186/1472-6750-14-20 ↗
32. Olszewska A, Eronen P, Johansson L-S et al (2011) The behaviour of cationic nanofibrillar cellulose in aqueous media. Cellulose 18:1213. doi: 10.1007/s10570-011-9577-010.1007/s10570-011-9577-0 ↗
33. Pääkkö M, Ankerfors M, Kosonen H et al (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromol 8:1934–194110.1021/bm061215p ↗
34. Page DH, El-Hosseiny F, Winkler K, Bain R (1972) The mechanical properties of single wood-pulp fibres. Part I: a new approach. Pulp Pap Mag Can 73:72–77
35. Pandey KK, Pitman AJ (2003) FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi. Int Biodeterior Biodegradation 52:151–160. doi: 10.1016/S0964-8305(03)00052-010.1016/S0964-8305(03)00052-0 ↗
36. Pelton RH, Jordan BD, Allen LH (1985) Particle size distributions of fines in mechanical pulps and some aspects of their retention in papermaking. Tappi J 68:91–94
37. Peng Y, Gardner D, Han Y et al (2013) Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity. Cellulose 20:2379–2392. doi: 10.1007/s10570-013-0019-z10.1007/s10570-013-0019-z ↗
38. Postek MT, Moon RJ, Rudie AW, Bilodeau MA (2013) Production and applications of cellulose. Tappi Press, Peachtree Corners
39. Qi H, Cai J, Zhang L et al (2008) Influence of finishing oil on structure and properties of multi-filament fibers from cellulose dope in NaOH/urea aqueous solution. Cellulose 15:81–89. doi: 10.1007/s10570-007-9142-z10.1007/s10570-007-9142-z ↗
40. Richardson TL, Lokensgard E (2004) Industrial plastics: theory and applications. Cengage Learning, Boston
41. Saharinen E, Nurminen I, Salminen L, Leino J (2016a) Method and apparatus for producing fine lignocellulosic material
42. Saharinen ET, Särkilahti A, Salminen LI, Heinemann S (2016b) The effect of wood alignment on wood grinding—part 1: properties of pulp and fines revealed in the grinding mechanism. BioResources 11:4201–421110.15376/biores.11.2.4201-4211 ↗
43. Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromol 8:2485–249110.1021/bm0703970 ↗
44. Sarkanen KV, Ludwig CH (1971) Liguins. Occurrence, formation, structure, and reactions. Wiley-Interscience, New York
45. Schlamadinger B, Marland G (1996) The role of forest and bioenergy strategies in the global carbon cycle. Biomass Bioenerg 10:275–300. doi: 10.1016/0961-9534(95)00113-110.1016/0961-9534(95)00113-1 ↗
46. Shen Y, Orelma H, Sneck A et al (2016) High velocity dry spinning of nanofibrillated cellulose (CNF) filaments on an adhesion controlled surface with low friction. Cellulose. doi: 10.1007/s10570-016-1044-510.1007/s10570-016-1044-5 ↗
47. Siracusa V, Rocculi P, Romani S, Rosa MD (2008) Biodegradable polymers for food packaging: a review. Trends Food Sci Technol 19:634–643. doi: 10.1016/j.tifs.2008.07.00310.1016/j.tifs.2008.07.003 ↗
48. Sluiter A, Hames B, Ruiz R et al (2012) Determination of structural carbohydrates and lignins in biomass. Laboratory analytical procedure (LAP). Issue Date: April 2008, Revision date: August 2012 (Version 08-03-2012). National Renewable Energy Laboratory, Colorado
49. Stark NM, Rowlands RE (2007) Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood Fiber Sci 35:167–174
50. Svagan AJ, Azizi Samir MAS, Berglund LA (2007) Biomimetic polysaccharide nanocomposites of high cellulose content and high toughness. Biomacromol 8:2556–256310.1021/bm0703160 ↗
51. Taipale T, Osterberg M, Nykanen A et al (2010) Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17:1005–102010.1007/s10570-010-9431-9 ↗
52. Tenhunen T-M, Hakalahti M, Kouko J et al (2016) Method for forming pulp fibre filaments developed by a design-driven process. BioResources 11:2492–2503
53. Vartiainen J, Vähä-Nissi M, Harlin A (2014) Biopolymer films and coatings in packaging applications—a review of recent developments. Mat Sci Appl 5:708–718. doi: 10.4236/msa.2014.51007210.4236/msa.2014.510072 ↗
54. Vieira MGA, da Silva MA, dos Santos LO, Beppu MM (2011) Natural-based plasticizers and biopolymer films: a review. Eur Polym J 47:254–263. doi: 10.1016/j.eurpolymj.2010.12.01110.1016/j.eurpolymj.2010.12.011 ↗
55. Walther A, Timonen JVI, Díez I et al (2011) Multifunctional high-performance biofibers based on wet-extrusion of renewable native cellulose nanofibrils. Adv Mater 23:2924–2928. doi: 10.1002/adma.20110058010.1002/adma.201100580 ↗
56. Zaman A, Alén R, Kotilainen R (2007) Thermal behavior of Scots pine (Pinus sylvestris) and silver birch (Betula pendula) at 200–230. Wood Fiber Sci 32:138–143
57. Zobel BJ, Van Buijtenen JP (1989) Wood variation-its causes and control, vol 363. Springer, Berlin, pp 439–44010.1007/978-3-642-74069-5 ↗