Fabrication and characterization of polyurethane and zirconium carbide coated cotton yarn
Source abstract
Abstract
In this work, polyurethane/zirconium carbide was coated on the surface of cotton ply yarn by sizing method. The effects of ZrC and PU concentration on the photothermal efficiency were studied. The results showed that when the concentration of zirconium carbide and polyurethane was 4 wt% and 6 wt% respectively, the infrared photothermal conversion performance of the composite yarn was the best, and its surface temperature increased from 22.1 °C to 77.3 °C after 5 min irradiation of IR lamp. The obtained composite yarn was examined by using scanning electron microscopy and X-ray diffraction. The thermal stability, mechanical property and ultraviolet protection factor were also evaluated. The results showed that PU/ZrC coated on cotton fiber surface, improved tensile strength and elongation of the cotton yarn and rendered the cotton yarn excellent UV protection without deterioration to thermal stability. The durability evaluation showed the washing resistance and cycling stability of the cotton/PU/ZrC yarn were pretty good, which suggested a promising route for fabricating novel multifunctional yarns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Alva G, Lin YX, Fang GY et al (2018) An overview of thermal energy storage systems. Energy 144:341–378. https://doi.org/10.1016/j.energy.2017.12.03710.1016/j.energy.2017.12.037 ↗
2. Bisoyi HK, Urbas AM, Quan L et al (2018) Soft materials driven by photothermal effect and their applications. Adv Opt Mater 6:1800458. https://doi.org/10.1002/adom.20180045810.1002/adom.201800458 ↗
3. Chattopadhyay R, Shukla A, Basak S, Ali SW (2017) Development of fire retardant sisal yarn. Cellulose 24(1):423–434. https://doi.org/10.1007/s10570-016-1115-710.1007/s10570-016-1115-7 ↗
4. Dou J, Rissanen M, Ilina P, Mkkyl H, Tammela P, Haslinger S, Vuorinen T (2021) Separation of fiber bundles from willow bark using sodium bicarbonate and their novel use in yarns for superior UV protection and antibacterial performance. Ind Crop Prod 164:113387. https://doi.org/10.1016/j.indcrop.2021.11338710.1016/j.indcrop.2021.113387 ↗
5. Farooq AS, Zhang P (2021) Fundamentals, materials and strategies for personal thermal management by next-generation textiles. Compos A. https://doi.org/10.1016/J.compositesa.2020.10624910.1016/J.compositesa.2020.106249 ↗
6. Guo Z, Sun C, Wang J et al (2021) High-performance laminated fabric with enhanced photothermal conversion and joule heating effect for personal thermal management. ACS Appl Mater Interfaces 13:8851–8862. https://doi.org/10.1021/ACSAMI.0C2312310.1021/ACSAMI.0C23123 ↗
7. Han M-W, Kim M-S, A S-H, et al (2020) Shape memory textile composites with multi-mode actuations for soft morphing skins. Compos B 198:108170. https://doi.org/10.1016/j.compositesb.2020.10817010.1016/j.compositesb.2020.108170 ↗
8. Heo JS, Eom J, Kim Y-H et al (2018) Recent progress of textile-based wearable electronics: A comprehensive review of materials, devices, and applications. Small 14:1703034. https://doi.org/10.1002/smll.20170303410.1002/smll.201703034 ↗
9. Ke G, Jin X, Cai G, Li W, Xu A (2021) A novel composite cotton yarn with phase change and electrical conductivity functions. J Ind Text. https://doi.org/10.1177/1528083721100316610.1177/15280837211003166 ↗
10. Kim HA, Kim SJ (2019) Heat storage and release characteristics of ceramic-Imbedded woven fabric for emotional clothing. Autex Res J 19:165–172. https://doi.org/10.1515/aut-2018-003910.1515/aut-2018-0039 ↗
11. Li K, Chang T-H, Li Z et al (2019b) Biomimetic MXene textures with enhanced light-to-heat conversion for solar steam generation and wearable thermal management. Adv Energy Mater 9:1901687. https://doi.org/10.1002/aenm.20190168710.1002/aenm.201901687 ↗
12. Li M, Chen J, Luo M et al (2021a) Wearable thermoelectric 3D spacer fabric containing a photothermal ZrC layer with improved power generation efficiency. Energy Convers Manage 243:114432. https://doi.org/10.1016/J.ENCONMAN.2021.11443210.1016/J.ENCONMAN.2021.114432 ↗
13. Li H, Du Z (2019) Preparation of a highly sensitive and stretchable strain sensor of MXene/silver nanocomposite-based yarn and wearable applications. ACS Appl Mater Interfaces 11(49):45930–45938. https://doi.org/10.1021/acsami.9b1924210.1021/acsami.9b19242 ↗
14. Li CL, Li LF, Li JC et al (2019a) Fabrication and characterisation of viscose fibre with photoinduced heat-generating properties. Cellulose 26:1631–164010.1007/s10570-018-2207-3 ↗
15. Li Z, Lin Z, Han M et al (2021b) Flexible electrospun carbon nanofibers/silicone composite films for electromagnetic interference shielding, electrothermal and photothermal applications. Chem Eng J 420:129826. https://doi.org/10.1016/J.CEJ.2021.12982610.1016/J.CEJ.2021.129826 ↗
16. Liu W, Liu S, Liu T et al (2019) Eco-friendly post-consumer cotton waste recycling for regenerated cellulose fibers. Carbohydr Polym 206:141–148. https://doi.org/10.1016/j.carbpol.2018.10.04610.1016/j.carbpol.2018.10.046 ↗
17. Muzaffar S, Abbas M, Siddiqua UH et al (2021) Enhanced mechanical, UV protection and antimicrobial properties of cotton fabric employing nanochitosan and polyurethane based finishing. J Mater Res Technol 11:946–956. https://doi.org/10.1016/J.JMRT.2021.01.01810.1016/J.JMRT.2021.01.018 ↗
18. Park J (2020) Functional fibers, composites and textiles utilizing photothermal and joule heating. Polymers 12:189. https://doi.org/10.3390/polym1201018910.3390/polym12010189 ↗
19. Peng Y, Cui Y (2020) Advanced textiles for personal thermal management and energy. Joule 4:724–742. https://doi.org/10.1016/j.joule.2020.02.01110.1016/j.joule.2020.02.011 ↗
20. Strauss T (2013) Permanently self-cleaning yarns. Advances in Textiles Technology 2013:5
21. Sun H, Zhou Q, Zhao Q et al (2019) Fabrication of ZrC/PVA-co-PE NF composite membrane with photothermal conversion for solar desalination. Compos Commun 13:151–155. https://doi.org/10.1016/j.coco.2019.05.00110.1016/j.coco.2019.05.001 ↗
22. Wang W-Y, Chiou J-C, Chen W-X et al (2021) Biosafety evaluation and quantitative determination of poly(hexamethylene biguanide) (PHMB) coated on cellulosic fabrics by Kubelka-Munk equation. Cellulose 28:6651–6661. https://doi.org/10.1007/s10570-021-03939-y10.1007/s10570-021-03939-y ↗
23. Xu J, Jiang S, Wang Y et al (2017) Photo-thermal conversion and thermal insulation properties of ZrC coated polyester fabric. Fibers Polym 18:1938–1944. https://doi.org/10.1007/s12221-017-1237-z10.1007/s12221-017-1237-z ↗
24. Yang L, Jin X, Zhang Y et al (2021) Recent development on heat transfer and various applications of phase-change materials. J Cleaner Prod. https://doi.org/10.1016/j.jclepro.2020.12443210.1016/j.jclepro.2020.124432 ↗
25. Zhang H, She Y, Zheng X et al (2014) Optical and mechanical properties of polyurethane/surface-modified nanocrystalline cellulose composites. Chin J Polym Sci 32:1363–1372. https://doi.org/10.1007/s10118-014-1526-610.1007/s10118-014-1526-6 ↗
26. Zheng Y, Panatdasirisuk W, Liu J et al (2020) Patterned, Wearable UV indicators from electrospun photochromic fibers and yarns. Adv Mater Techn 5(11):1–8. https://doi.org/10.1002/admt.20200056410.1002/admt.202000564 ↗
27. Zhukovskyi M, Sanchez-Botero L, McDonald MP et al (2014) Nanowire- functionalized cotton textiles. ACS Appl Mater Interfaces 6:2262–2269. https://doi.org/10.1021/am405260210.1021/am4052602 ↗