Effect of the graft density of cellulose diacetate-modified layered perovskite nanosheets on mechanical properties of the transparent organic–inorganic hybrids bearing covalent bonds at the interface
Source abstract
Abstract
Transparent organic–inorganic hybrids with a whitish colour were prepared from cellulose diacetate (CDA) nanosheets derived from Dion–Jacobson-type ion-exchangeable layered perovskite HLaNb2O7·xH2O (HLaNb) to prepare CDA-based hybrids bearing covalent bonds between HLaNb nanosheets and CDA matrices for improved mechanical properties. An n-decoxy derivative of HLaNb (C10_HLaNb) was exfoliated in acetonitrile by ultrasonication. TEM and AFM images revealed that C10_HLaNb was exfoliated into individual nanosheets. In order to explore the local environment around HLaNb nanosheets, a very small amount of CDA was reacted with a C10_HLaNb nanosheet dispersion [molar ratio COH:(NbOH+NbOC10H21) = 4:1] at 80°C, and solid-state 13C NMR with cross polarization and magic angle spinning techniques showed that an alcohol-exchange-type reaction was proceeded to graft the CDA chains to the HLaNb nanosheets via new Nb–O–C covalent linkages. The CDA-based hybrids were prepared by dispersing 5 mass% of HLaNb nanosheets in CDA and subsequent heating at 80 °C for 1–7 days to cause a grafting reaction, and the product prepared by a 1-day grafting reaction exhibited improved mechanical properties compared to neat CDA; the Young’s modulus, tensile strength and toughness increased by 18, 34 and 78%, respectively. The mechanical properties deteriorated with further extension of the reaction period, however. In addition, a hybrid film prepared by mixing CDA and a C10_HLaNb nanosheet dispersion exhibited only a slight improvement in mechanical properties. These results clearly indicate that formation of an appropriate number of Nb–O–C bonds at the nanosheet/CDA interfaces is effective for improving mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Layered Double Hydroxides Synthesis and Applications · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Althues H, Henle J, Kaskel S (2007) Functional inorganic nanofillers for transparent polymers. Chem Soc Rev 36:1454. doi: 10.1039/b608177k10.1039/b608177k ↗
2. Asai Y, Ariake Y, Saito H, Idota N, Matsukawa K, Nishino T, Sugahara Y (2014) Layered perovskite nanosheets bearing fluoroalkoxy groups: their preparation and application in epoxy-based hybrids. RSC Adv 4:26932. doi: 10.1039/c4ra01777c10.1039/c4ra01777c ↗
3. Barud HS et al (2008) Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose. Thermochim Acta 471:61–69. doi: 10.1016/j.tca.2008.02.00910.1016/j.tca.2008.02.009 ↗
4. Campos JM, Ferraria AM, Botelho do Rego AM, Ribeiro MR, Barros-Timmons A (2015) Studies on PLA grafting onto graphene oxide and its effect on the ensuing composite films. Mater Chem Phys 166:122–132. doi: 10.1016/j.matchemphys.2015.09.03610.1016/j.matchemphys.2015.09.036 ↗
5. Edgar KJ, Buchanan CM, Debenham JS, Rundquist PA, Seiler BD, Shelton MC, Tindall D (2001) Advances in cellulose ester performance and application. Prog Polym Sci 26:1605–1688. doi: 10.1016/s0079-6700(01)00027-210.1016/s0079-6700(01)00027-2 ↗
6. Fang M, Zhang Z, Li J, Zhang H, Lu H, Yang Y (2010) Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces. J Mater Chem 20:9635. doi: 10.1039/c0jm01620a10.1039/c0jm01620a ↗
7. Glasser WG (2004) 6. Prospects for future applications of cellulose acetate. Macromol Symp 208:371–394. doi: 10.1002/masy.20045041610.1002/masy.200450416 ↗
8. Gopalakrishnan J, Bhat V, Raveau B (1987) AILaNb2O7: a new series of layered perovskites exhibiting ion exchange and intercalation behaviour. Mater Res Bull 22:413–417. doi: 10.1016/0025-5408(87)90060-210.1016/0025-5408(87)90060-2 ↗
9. Huang HD, Liu CY, Li D, Chen YH, Zhong GJ, Li ZM (2014) Ultra-low gas permeability and efficient reinforcement of cellulose nanocomposite films by well-aligned graphene oxide nanosheets. J Mater Chem A 2:15853–15863. doi: 10.1039/c4ta03305a10.1039/c4ta03305a ↗
10. Huber T, Müssig J, Curnow O, Pang S, Bickerton S, Staiger MP (2012) A critical review of all-cellulose composites. J Mater Sci 47:1171–1186. doi: 10.1007/s10853-011-5774-310.1007/s10853-011-5774-3 ↗
11. Hussain F, Hojjati M, Okamoto M, Gorga RE (2006) Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 40:1511–1575. doi: 10.1177/002199830606732110.1177/0021998306067321 ↗
12. Jin H et al (2013) Ionically interacting nanoclay and nanofibrillated cellulose lead to tough bulk nanocomposites in compression by forced self-assembly. J Mater Chem B 1:835–840. doi: 10.1039/c2tb00370h10.1039/c2tb00370h ↗
13. Kabiri R, Namazi H (2014) Nanocrystalline cellulose acetate (NCCA)/graphene oxide (GO) nanocomposites with enhanced mechanical properties and barrier against water vapor. Cellulose 21:3527–3539. doi: 10.1007/s10570-014-0366-410.1007/s10570-014-0366-4 ↗
14. Liu J, Yang W, Tao L, Li D, Boyer C, Davis TP (2010) Thermosensitive graphene nanocomposites formed using pyrene-terminal polymers made by RAFT polymerization. J Polym Sci Part A Polym Chem 48:425–433. doi: 10.1002/pola.2380210.1002/pola.23802 ↗
15. Liu J, Tang J, Gooding JJ (2012) Strategies for chemical modification of graphene and applications of chemically modified graphene. J Mater Chem 22:12435. doi: 10.1039/c2jm31218b10.1039/c2jm31218b ↗
16. Liu L, Shen Z, Liang S, Yi M, Zhang X, Ma S (2014) Graphene for reducing bubble defects and enhancing mechanical properties of graphene/cellulose acetate composite films. J Mater Sci 49:321–328. doi: 10.1007/s10853-013-7708-810.1007/s10853-013-7708-8 ↗
17. Lonkar SP, Deshmukh YS, Abdala AA (2014) Recent advances in chemical modifications of graphene. Nano Res 8:1039–1074. doi: 10.1007/s12274-014-0622-910.1007/s12274-014-0622-9 ↗
18. Marsh K, Bugusu B (2007) Food packaging-roles, materials, and environmental issues. J Food Sci 72:R39–R55. doi: 10.1111/j.1750-3841.2007.00301.x10.1111/j.1750-3841.2007.00301.x ↗
19. Mittal V, Chaudhry AU, Luckachan GE (2014) Biopolymer—thermally reduced graphene nanocomposites: structural characterization and properties. Mater Chem Phys 147:319–332. doi: 10.1016/j.matchemphys.2014.05.00710.1016/j.matchemphys.2014.05.007 ↗
20. Morimune S, Nishino T, Goto T (2012) Poly(vinyl alcohol)/graphene oxide nanocomposites prepared by a simple eco-process. Polym J 44:1056–1063. doi: 10.1038/pj.2012.5810.1038/pj.2012.58 ↗
21. Morita R, Khan FZ, Sakaguchi T, Shiotsuki M, Nishio Y, Masuda T (2007) Synthesis, characterization, and gas permeation properties of the silyl derivatives of cellulose acetate. J Membr Sci 305:136–145. doi: 10.1016/j.memsci.2007.07.04510.1016/j.memsci.2007.07.045 ↗
22. Ojijo V, Sinha Ray S (2013) Processing strategies in bionanocomposites. Prog Polym Sci 38:1543–1589. doi: 10.1016/j.progpolymsci.2013.05.01110.1016/j.progpolymsci.2013.05.011 ↗
23. Park H-M, Liang X, Mohanty AK, Misra M, Drzal LT (2004) Effect of compatibilizer on nanostructure of the biodegradable cellulose acetate/organoclay nanocomposites. Macromolecules 37:9076–9082. doi: 10.1021/ma048958s10.1021/ma048958s ↗
24. Podsiadlo P et al (2007) Ultrastrong and stiff layered polymer nanocomposites. Science 318:80–83. doi: 10.1126/science.114317610.1126/science.1143176 ↗
25. Rodríguez FJ, Coloma A, Galotto MJ, Guarda A, Bruna JE (2012) Effect of organoclay content and molecular weight on cellulose acetate nanocomposites properties. Polym Degrad Stab 97:1996–2001. doi: 10.1016/j.polymdegradstab.2012.06.00310.1016/j.polymdegradstab.2012.06.003 ↗
26. Rohini R, Katti P, Bose S (2015) Tailoring the interface in graphene/thermoset polymer composites: a critical review. Polymer 70:A17–A34. doi: 10.1016/j.polymer.2015.06.01610.1016/j.polymer.2015.06.016 ↗
27. Salavagione HJ, Martínez G (2011) Importance of covalent linkages in the preparation of effective reduced graphene oxide-poly(vinyl chloride) nanocomposites. Macromolecules 44:2685–2692. doi: 10.1021/ma102932c10.1021/ma102932c ↗
28. Sei T, Ishitani K, Suzuki R, Ikematsu K (1985) Distribution of acetyl group in cellulose acetate as determined by nuclear magnetic resonance analysis. Polym J 17:1065–1069. doi: 10.1295/polymj.17.106510.1295/polymj.17.1065 ↗
29. Shimada A, Yoneyama Y, Tahara S, Mutin PH, Sugahara Y (2009) Interlayer surface modification of the protonated ion-exchangeable layered perovskite HLaNb2O7·xH2O with organophosphonic acids. Chem Mater 21:4155–4162. doi: 10.1021/cm900228c10.1021/cm900228c ↗
30. Shori S, Pellechia PJ, zur Loye H-C, Ploehn HJ (2015) Covalent grafting of phenylphosphonate on calcium niobate platelets. J Colloid Interface Sci 437:97–110. doi: 10.1016/j.jcis.2014.09.02410.1016/j.jcis.2014.09.024 ↗
31. Sinharay S, Bousmina M (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 50:962–1079. doi: 10.1016/j.pmatsci.2005.05.00210.1016/j.pmatsci.2005.05.002 ↗
32. Sugahara Y (2014) Chemical processes employing inorganic layered compounds for inorganic and inorganic-organic hybrid materials. J Ceram Soc Jpn 122:523–529. doi: 10.2109/jcersj2.122.52310.2109/jcersj2.122.523 ↗
33. Suzuki H, Notsu K, Takeda Y, Sugimoto W, Sugahara Y (2003) Reactions of alkoxyl derivatives of a layered perovskite with alcohols: substitution reactions on the interlayer surface of a layered perovskite. Chem Mater 15:636–641. doi: 10.1021/cm020090210.1021/cm0200902 ↗
34. Takeda Y, Suzuki H, Notsu K, Sugimoto W, Sugahara Y (2006) Preparation of a novel organic derivative of the layered perovskite bearing HLaNb2O7 nH2O interlayer surface trifluoroacetate groups. Mater Res Bull 41:834–841. doi: 10.1016/j.materresbull.2005.10.00410.1016/j.materresbull.2005.10.004 ↗
35. Terrones M et al (2011) Interphases in graphene polymer-based nanocomposites: achievements and challenges. Adv Mater 23:5302–5310. doi: 10.1002/adma.20110203610.1002/adma.201102036 ↗
36. Wang J-Y, Yang S-Y, Huang Y-L, Tien H-W, Chin W-K, Ma C-CM (2011) Preparation and properties of graphene oxide/polyimide composite films with low dielectric constant and ultrahigh strength via in situ polymerization. J Mater Chem 21:13569. doi: 10.1039/c1jm11766a10.1039/c1jm11766a ↗
37. Wang BG, Lou WJ, Wang XB, Hao JC (2012a) Relationship between dispersion state and reinforcement effect of graphene oxide in microcrystalline cellulose-graphene oxide composite films. J Mater Chem 22:12859–12866. doi: 10.1039/c2jm31635h10.1039/c2jm31635h ↗
38. Wang C, Tang K, Wang D, Liu Z, Wang L, Zhu Y, Qian Y (2012b) A new carbon intercalated compound of Dion–Jacobson phase HLaNb2O7. J Mater Chem 22:11086. doi: 10.1039/c2jm14902h10.1039/c2jm14902h ↗
39. Yoshioka S, Takeda Y, Uchimaru Y, Sugahara Y (2003) Hydrosilylation in the 2D interlayer space between inorganic layers: reaction between immobilized C=C groups on the interlayer surface of layered perovskite HLaNb2O7·xH2O and chlorohydrosilanes. J Organomet Chem 686:145–150. doi: 10.1016/s0022-328x(03)00618-110.1016/s0022-328x(03)00618-1 ↗
40. Zaman I, Le Q-H, Kuan H-C, Kawashima N, Luong L, Gerson A, Ma J (2011) Interface-tuned epoxy/clay nanocomposites. Polymer 52:497–504. doi: 10.1016/j.polymer.2010.12.00710.1016/j.polymer.2010.12.007 ↗