Facile assembly of cellulose-derived 3D-graphene/lithium hydroxide monohydrate nanocomposite for low-temperature chemical heat storage
Source abstract
Abstract
Commonly used nanocarbon composite materials are routinely synthesized from petroleum-based resources. To avoid their bad impact on the environment, using cellulose-based materials as the promising resources is a better choice due to its easy acquisition and rich reserves. In this study, microcrystalline cellulose was selected as the carbon precursor to synthesize novel cellulose-derived 3D-graphene/LiOH·H2O nanomaterials for chemical heat storage to improve the efficiency of thermal energy utilization. The characterization and performance test results show that LiOH·H2O particles (5–20 nm) were highly dispersed on the 3D graphene carbon skeleton. These materials had excellent heat storage densities and thermal conductivities due to a completely new, hydrophilic, nano-reactive interface on 3D graphene. Among the materials, 3D-GF-VC-LiOH·H2O (Ascorbic acid-modified 3D-graphene/LiOH·H2O) exhibited the best heat storage and thermal conductivity properties. It achieved a thermal conductivity of 2.6 W/m K, which was 1.5 times that obtained with pure LiOH·H2O, and its heat storage density (2157 kJ/kg) was 3.3 times that of pure LiOH·H2O (661 kJ/kg). The activation energy could decrease to 27.5 kJ/mol. Moreover, the heat storage temperature range of LiOH·H2O was clearly expanded by introduction of 3D graphene. Hence, the addition of cellulose-derived 3D graphene is a very efficient means by which the design of chemical heat storage materials can be improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Asif M, Tan Y, Pan LJ, Rashad M, Li JY, Fu X, Cui RX (2016) Synthesis of a highly efficient 3D graphene-CNT-MnO2-PANI nanocomposite as a binder free electrode material for supercapacitors. Phys Chem Chem Phys 18:26854–2686410.1039/C6CP04996F ↗
2. Cao XH, Shi YM, Shi WH, Lu G, Huang X, Yan QY, Zhang QC, Zhang H (2011) Preparation of novel 3D graphene networks for supercapacitor applications. Small 7:3163–316810.1002/smll.201100990 ↗
3. Cao Q, Han SJ, Tulevski GS, Zhu Y, Lu DD, Haensch W (2013) Arrays of single-walled carbon nanotubes with full surface coverage for high-performance electronics. Nat Nanotechnol 8:180–18610.1038/nnano.2012.257 ↗
4. Chen CT, Yu YL, Li KM, Zhao MY, Liu L, Yang JZ, Liu J, Sun DP (2015a) Facile approach to the fabrication of 3D electroconductive nanofibers with controlled size and conductivity templated by bacterial cellulose. Cellulose 22:3929–393910.1007/s10570-015-0770-4 ↗
5. Chen JK, Gui XC, Lin ZQ, Tang ZK, Lee MM, Wokaun A, Lippert T (2015b) Pulsed ultra-violet laser interactions with ultra-low-density porous carbon nanotube sponges. Carbon 93:604–61010.1016/j.carbon.2015.05.089 ↗
6. Cui ZX, Xue YQ, Xiao LB, Wang TT (2013) Effect of particle size on activation energy for thermal decomposition of nano-CaCO3. J Comput Theor Nanosci 10:569–57210.1166/jctn.2013.2735 ↗
7. Gaminian H, Montaze M, Bahi A, Karaaslan M, Ko F (2018) Capacitance performance boost of cellulose-derived carbon nanofibers via carbon and silver nanoparticles. Cellulose. https://doi.org/10.1007/s10570-018-2219-z10.1007/s10570-018-2219-z ↗
8. Gil A, Medrano M, Martorell I, Lázaro A, Dolado P, Zalba B, Cabeza LF (2010) State of the art on high temperature thermal energy storage for power generation. Part 1-concepts, materials and modellization. Renew Sustain Energy Rev 14:31–5510.1016/j.rser.2009.07.035 ↗
9. Hoang K, Janotti A, Van de Walle CG (2011) The particle-size dependence of the activation energy for decomposition of lithium amide. Angew Chem Int Ed 123:10352–1035510.1002/ange.201100810 ↗
10. Hongois S, Kuznik F, Stevens P, Roux JJ (2011) Development and characterisation of a new MgSO4-zeolite composite for long-term thermal energy storage. Sol Energy Mater Sol Cells 95:1831–183710.1016/j.solmat.2011.01.050 ↗
11. Ishitobi H, Uruma K, Takeuchi M, Ryu J, Kato Y (2013) Dehydration and hydration behavior of metal-salt-modified materials for chemical heat pumps. Appl Therm Eng 50:1639–164410.1016/j.applthermaleng.2011.07.020 ↗
12. Kardam A, Narayanan SS, Bhardwaj N, Madhwal D, Shukla P, Verma A, Jain VK (2015) Ultrafast thermal charging of inorganic nano-phase change material composites for solar thermal energy storage. RSC Adv 5:56541–5654810.1039/C5RA06869J ↗
13. Kubota M, Horie N, Togari H, Matsuda H (2013) Improvement of hydration rate of LiOH/LiOH·H2O reaction for low-temperature thermal energy storage. Annual meeting of Japan society of refrigerating, air conditioning engineers, Tokai University, Japan
14. Kubota M, Matsumoto S, Matsuda H, Huang HY, He ZH, Yang XX (2014) Chemical heat storage with LiOH/LiOH·H2O reaction for low-temperature heat below 373K. Adv Mater Res 953–954:757–76010.4028/www.scientific.net/AMR.953-954.757 ↗
15. Kubota M, Matsumoto S, Matsuda H (2019) Enhancement of hydration rate of LiOH by combining with mesoporous carbon for low-temperature chemical heat storage. Appl Therm Eng 150:858–86310.1016/j.applthermaleng.2019.01.049 ↗
16. Kyaw K, Shibata T, Watanabe F, Matsuda H, Hasatani M (1997) Applicability of zeolite for CO2 storage in a CaO–CO2 high temperature energy storage system. Energy Convers Manag 38:1025–103310.1016/S0196-8904(96)00132-X ↗
17. Li ZY, Yu K, Liu J, Tian YW, Zhai YC (2012) Effect of diameter on apparent activation energy of non-isothermal decomposition reaction of nano-Mg(OH)2 powder. Curr Nanosci 8:97–10110.2174/1573413711208010097 ↗
18. Li H, Liu LF, Yang FL (2013) Covalent assembly of 3D graphene/polypyrrole foams for oil spill cleanup. J Mater Chem A 1:3446–345310.1039/c3ta00166k ↗
19. Li SJ, Huang HY, Li J, Kobayashi N, Osaka Y, He ZH, Yuan HR (2018) The effect of 3D carbon nanoadditives on lithium hydroxide monohydrate based composite materials for highly efficient low temperature thermochemical heat storage. RSC Adv 8:8199–820810.1039/C8RA00269J ↗
20. Liu ZP, Zou RQ, Lin ZQ, Gui XC, Chen RJ, Lin JH, Shang YY, Cao AY (2013) Tailoring carbon nanotube density for modulating electro-to-heat conversion in phase change composites. Nano Lett 13:4028–403510.1021/nl401097d ↗
21. Liu XC, Osaka Y, Huang HY, Li J, Yang XX, Li SJ, Kobayashi N (2016) Development of low-temperature desulfurization performance of a MnO2/AC composite for a combined SO2 trap for diesel exhaust. RSC Adv 6:96367–9637510.1039/C6RA19017K ↗
22. Lu ZY, Hou DS, Xu BW, Li ZJ (2015) Preparation and characterization of an expanded perlite/paraffin/graphene oxide composite with enhanced thermal conductivity and leakage-bearing properties. RSC Adv 5:10751–1075210.1039/C4RA15167D ↗
23. Mehrali M, Latibari ST, Mehrali M, Mahlia TMI, Metselaar HSC (2014) Effect of carbon nanospheres on shape stabilization and thermal behavior of phase change materials for thermal energy storage. Energy Convers Manag 88:206–21310.1016/j.enconman.2014.08.014 ↗
24. Meng YJ, Young TM, Liu PZ, Contescu CI, Huang B, Wang SQ (2015) Ultralight carbon aerogel from nanocellulose as a highly selective oil absorption material. Cellulose 22:435–44710.1007/s10570-014-0519-5 ↗
25. Miró L, Navarro ME, Suresh P, Gil A, Fernández AI, Cabeza LF (2014) Experimental characterization of a solid industrial by-product as material for high temperature sensible thermal energy storage (TES). Appl Energy 113:1261–126810.1016/j.apenergy.2013.08.082 ↗
26. Muñoz-Sandoval E, Cortes-López AJ, Flores-Gómez B, Fajardo-Díaz JL, Sánchez-Salas R, López-Urías F (2017) Carbon sponge-type nanostructures based on coaxial nitrogen-doped multiwalled carbon nanotubes grown by CVD using benzylamine as precursor. Carbon 115:409–42110.1016/j.carbon.2017.01.010 ↗
27. Ogura H, Yamamoto T, Kage H (2003) Efficiencies of CaO/H2O/Ca(OH)2 chemical heat pump for heat storing and heating/cooling. Energy 28:1479–149310.1016/S0360-5442(03)00119-1 ↗
28. Pardo P, Deydier A, Anxionnaz-Minvielle Z, Rougé S, Cabassud M, Cognet P (2014) A review on high temperature thermochemical heat energy storage. Renew Sustain Energy Rev 32:591–61010.1016/j.rser.2013.12.014 ↗
29. Rafieian F, Hosseini M, Jonoobi M, Yu QL (2018) Development of hydrophobic nanocellulose-based aerogel via chemical vapor deposition for oil separation for water treatment. Cellulose 25:4695–471010.1007/s10570-018-1867-3 ↗
30. Rothensteiner M, Bonk A, Vogt UF, Emeriche H, Bokhoven JAV (2017) Structural changes in equimolar ceria-hafnia materials under solar thermochemical looping conditions: cation ordering, formation and stability of the pyrochlore structure. RSC Adv 7:53797–5380910.1039/C7RA09261J ↗
31. Salomoni VA, Majorana CE, Giannuzzi GM, Miliozzi A, Maggio RD, Girardi F, Mele D, Lucentini M (2014) Thermal storage of sensible heat using concrete modules in solar power plants. Sol Energy 103:303–31510.1016/j.solener.2014.02.022 ↗
32. Shen Y, Sun D, Yu L, Zhang W, Shang YY, Tang HR, Wu JF, Cao AY, Huang YH (2013) A high-capacity lithium-air battery with Pd modified carbon nanotube sponge cathode working in regular air. Carbon 62:288–29510.1016/j.carbon.2013.05.066 ↗
33. Sheppard DA, Paskevicius M, Buckley CE (2011) Thermodynamics of hydrogen desorption from NaMgH3 and its application as a solar heat storage medium. Chem Mater 23:4298–430010.1021/cm202056s ↗
34. Shkatulov A, Aristov Y (2017) Calcium hydroxide doped by KNO3 as a promising candidate for thermochemical storage of solar heat. RSC Adv 7:42929–4293910.1039/C7RA06639B ↗
35. Song P, Shen XP, He XM, Feng KH, Kong LR, Ji ZY, Zhai LZ, Zhu GX, Zhang DY (2018) Cellulose-derived nitrogen-doped hierarchically porous carbon for high-performance supercapacitors. Cellulose. https://doi.org/10.1007/s10570-018-2115-610.1007/s10570-018-2115-6 ↗
36. Su X, Wu J, Hinds BJ (2011) Catalytic activity of ultrathin Pt films on aligned carbon nanotube arrays. Carbon 49:1145–115010.1016/j.carbon.2010.11.029 ↗
37. Tang QQ, Sun J, Yu SM, Wang GC (2014) Improving thermal conductivity and decreasing supercooling of paraffin phase change materials by n-octadecylamine-functionalized multi-walled carbon nanotubes. RSC Adv 4:36584–3659010.1039/C4RA04225E ↗
38. Tarrés Q, Oliver-Ortega H, Llop M, Àngels Pèlach M, Delgado-Aguilar M, Mutjé P (2016) Effective and simple methodology to produce nanocellulose-based aerogels for selective oil removal. Cellulose 23:3077–308810.1007/s10570-016-1017-8 ↗
39. Wang JF, Xie HQ, Xin Z, Li Y, Chen LF (2010) Enhancing thermal conductivity of palmitic acid based phase change materials with carbon nanotubes as fillers. Sol Energy 84:339–34410.1016/j.solener.2009.12.004 ↗
40. Wang QC, Lei YP, Chen ZY, Wu N, Wang YB, Wang B, Wang YD (2018) Fe/Fe3C@C nanoparticles encapsulated in N-doped graphene-CNTs framework as an efficient bifunctional oxygen electrocatalyst for robust rechargeable Zn-air batteries. J Mater Chem A 6:516–52610.1039/C7TA08423D ↗
41. Whiting G, Grondin D, Bennici S, Auroux A (2013) Heats of water sorption studies on zeolite–MgSO4 composites as potential thermochemical heat storage materials. Sol Energy Mater Sol Cells 112:112–11910.1016/j.solmat.2013.01.020 ↗
42. Wongsuwan W, Kumar S, Neveu P, Meunier F (2001) A review of chemical heat pump technology and applications. Appl Therm Eng 21:1489–151910.1016/S1359-4311(01)00022-9 ↗
43. Yan T, Wang RZ, Li TX, Wang LW, Fred IT (2015) A review of promising candidate reactions for chemical heat storage. Renew Sustain Energy Rev 43:13–3110.1016/j.rser.2014.11.015 ↗
44. Yang XX, Huang HY, Wang ZH, Kubota M, He ZH, Kobayashi N (2016) Facile synthesis of graphene oxide-modified lithium hydroxide for low-temperature chemical heat storage. Chem Phys Lett 644:31–3410.1016/j.cplett.2015.11.033 ↗
45. Yuan DS, Chen JX, Zeng JH, Tan SX (2008) Preparation of monodisperse carbon nanospheres for electrochemical capacitors. Electrochem Commun 10:1067–107010.1016/j.elecom.2008.05.015 ↗
46. Zeng ZP, Gui XC, Lin ZQ, Zhang LH, Yi J, Cao AY, Zhu Y, Xiang R, Wu TZ, Tang ZK (2013) Carbon nanotube Sponge-Array tandem composites with extended energy absorption range. Adv Mater 25:1185–119110.1002/adma.201203901 ↗
47. Zhang GQ, Li Z, Zheng HY, Fu TJ, Ju YB, Wang YC (2015) Influence of the surface oxygenated groups of activated carbon on preparation of a nano Cu/AC catalyst and heterogeneous catalysis in the oxidative carbonylation of methanol. Appl Catal B 179:95–10510.1016/j.apcatb.2015.05.001 ↗
48. Zhang LM, Sui XL, Zhao L, Huang GS, Gu DM, Wang ZB (2017a) Three-dimensional hybrid aerogels built from graphene and polypyrrole-derived nitrogen-doped carbon nanotubes as a high-efficiency Pt-based catalyst support. Carbon 121:518–52610.1016/j.carbon.2017.06.023 ↗
49. Zhang K, Li TT, Ling L, Lu HF, Tang L, Li CW, Wang LJ, Yao YG (2017b) Facile synthesis of high density carbon nanotube array by a deposition-growth-densification process. Carbon 114:435–44010.1016/j.carbon.2016.12.047 ↗