Surface-esterified cellulose fiber in a polypropylene matrix: impact of esterification on crystallization kinetics and dispersion
Source abstract
Abstract
Cellulose powders hydrophobized by surface esterification with carboxylic acids with different chain lengths (3, 10 and 18 carbons) were dispersed in a polypropylene matrix. Quality of the dispersion and nucleation activity of the filler were investigated by means of differential scanning calorimetry and optical microscopy. The results showed that the esterification decreases the crystallization rate in case of cellulose esterified with propionic or decanoic acid. On the other hand, the oleic acid ester demonstrated slightly higher crystallization rates than the unmodified cellulose, which was ascribed primarily to the newly arisen non-esterified surface after disintegration of the filler. Optical microscopy with hot stage showed the high nucleation ability of the natural cellulose fiber and its suppression in case of esterified surfaces. A complete inability to nucleate polypropylene crystallization was observed in case of decanoyl ester, while the other two retained some activity, but lower than that of the natural fiber. Finally, analysis of the filler dispersion and distribution revealed that the decanoyl and octadecanoyl esters disintegrate during melt mixing, while both dispersion and distribution of the fibers modified with propionic acid are poor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Borysiak S (2009) Supermolecular structure of wood/polypropylene composites: I. The influence of processing parameters and chemical treatment of the filler. Polym Bull 64:275–290. doi: 10.1007/s00289-009-0202-410.1007/s00289-009-0202-4 ↗
2. Borysiak S (2012) Fundamental studies on lignocellulose/polypropylene composites: effects of wood treatment on the transcrystalline morphology and mechanical properties. J Appl Polym Sci 127:1309–1322. doi: 10.1002/app.3765110.1002/app.37651 ↗
3. Borysiak S, Doczekalska B (2009) The influence of chemical modification of wood on its nucleation ability in polypropylene composites. Polimery 54:820–82710.14314/polimery.2009.820 ↗
4. Chvatalova L, Navratilova J, Cermak R, Raab M, Obadal M (2009) Joint effects of molecular structure and processing history on specific nucleation of isotactic polypropylene. Macromolecules 42:7413–7417. doi: 10.1021/ma900587810.1021/ma9005878 ↗
5. George J, Sreekala MS, Thomas S (2001) A review on interface modification and characterization of natural fiber reinforced plastic composites. Polym Eng Sci 41:1471–1485. doi: 10.1002/pen.1084610.1002/pen.10846 ↗
6. Gray DG (2007) Transcrystallization of polypropylene at cellulose nanocrystal surfaces. Cellulose 15:297–301. doi: 10.1007/s10570-007-9176-210.1007/s10570-007-9176-2 ↗
7. Heinze T, Liebert T (2001) Unconventional methods in cellulose functionalization. Prog Polym Sci 26:1689–1762. doi: 10.1016/S0079-6700(01)00022-310.1016/S0079-6700(01)00022-3 ↗
8. Janicek M, Krejci O, Cermak R (2013) Thermal stability of surface-esterified cellulose and its composite with polyolefinic matrix. Cellulose 20:2745–2755. doi: 10.1007/s10570-013-0070-910.1007/s10570-013-0070-9 ↗
9. Jawaid M, Abdul Khalil HPS (2011) Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review. Carbohydr Polym 86:1–18. doi: 10.1016/j.carbpol.2011.04.04310.1016/j.carbpol.2011.04.043 ↗
10. John MJ, Thomas S (2008) Biofibres and biocomposites. Carbohydr Polym 71:343–364. doi: 10.1016/j.carbpol.2007.05.04010.1016/j.carbpol.2007.05.040 ↗
11. Lamberti G (2011) Isotactic polypropylene crystallization: analysis and modeling. Eur Polym J 47:1097–1112. doi: 10.1016/j.eurpolymj.2011.02.00510.1016/j.eurpolymj.2011.02.005 ↗
12. Pijpers TFJ, Mathot VBF, Goderis B, Scherrenberg RL, van der Vegte EW (2002) High-speed calorimetry for the study of the kinetics of (de)vitrification, crystallization, and melting of macromolecules. Macromolecules 35:3601–3613. doi: 10.1021/ma011122u10.1021/ma011122u ↗
13. Sbirrazzuoli N, Vincent L, Mija A, Guigo N (2009) Integral, differential and advanced isoconversional methods. Chemom Intell Lab Syst 96:219–226. doi: 10.1016/j.chemolab.2009.02.00210.1016/j.chemolab.2009.02.002 ↗
14. Schneider CA, Rasband WS, Eliceiri KW (2012) NIH Image to ImageJ: 25 years of image analysis. Nat Methods 9:671–675. doi: 10.1038/nmeth.208910.1038/nmeth.2089 ↗
15. Son SJ, Lee YM, Im SS (2000) Transcrystalline morphology and mechanical properties in polypropylene composites containing cellulose treated with sodium hydroxide and cellulase. J Mater Sci 5:5767–5778. doi: 10.1023/A:100482712874710.1023/A:1004827128747 ↗
16. Uschanov P, Johansson LS, Maunu SL, Laine J (2010) Heterogeneous modification of various celluloses with fatty acids. Cellulose 18:393–404. doi: 10.1007/s10570-010-9478-710.1007/s10570-010-9478-7 ↗
17. Vyazovkin S, Linert W (1995) Kinetic analysis of reversible thermal decomposition of solids. Int J Chem Kinet 27:73–84. doi: 10.1002/kin.55027010910.1002/kin.550270109 ↗
18. Vyazovkin S, Sbirrazzuoli N (2003) Isoconversional analysis of calorimetric data on nonisothermal crystallization of a polymer melt. J Phys Chem B 107:882–888. doi: 10.1021/jp026592k10.1021/jp026592k ↗
19. Vyazovkin S, Wight CA (1997) Kinetics in solids. Annu Rev Phys Chem 48:125–149. doi: 10.1146/annurev.physchem.48.1.12510.1146/annurev.physchem.48.1.125 ↗
20. Vyazovkin S, Burnham AK, Criado JM, Perez-Maqueda LA, Popescu C, Sbirrazzuoli N (2011) ICTAC kinetics committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta 520:1–19. doi: 10.1016/j.tca.2011.03.03410.1016/j.tca.2011.03.034 ↗
21. Wang C, Liu CR (1999) Transcrystallization of polypropylene composites: nucleating ability of fibres. Polymer 40:289–298. doi: 10.1016/S0032-3861(98)00240-710.1016/S0032-3861(98)00240-7 ↗