journal article·2007-04

Kinetics of geopolymerization: Role of Al2O3 and SiO2

P. De Silva, K. Sagoe-Crenstil, V. Sirivivatnanon

Cement and Concrete Research· Volume 37· Issue 4
Publisher page

Abstract

Abstract The early-stage reaction kinetics of metakaolin/sodium silicate/sodium hydroxide geopolymer system have been investigated. The setting and early strength development characteristics, and associated mineral and microstructural phase development of mixtures containing varying SiO 2 /Al 2 O 3 ratios, cured at 40 °C for up to 72 h, were carefully studied. It was observed that setting time of the geopolymer systems was mainly controlled by the alumina content. Essentially, the setting time increased with increasing SiO 2 /Al 2 O 3 ratio of the initial mixture. Up to a certain limit, the SiO 2 /Al 2 O 3 ratio was also found to be responsible for observed high-strength gains at later stages. An increase in the Al 2 O 3 content, i.e. for low SiO 2 /Al 2 O 3 ratio, led to products of low strength, accompanied by microstructures with increased amounts of Na–Al–Si-containing “massive” phases (grains). EDAX analyses showed that the SiO 2 /Al 2 O 3 ratios of geopolymer gel phases were quite similar to those of the starting mixtures, but with an overall lower Na content. Most importantly, this study clearly demonstrates that the properties of resulting geopolymer systems can be drastically affected by minor changes in the available Si and Al concentrations during synthesis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. J. Davidovits, Mineral polymers and methods of making them, US Patent 4,349,386 (1982).
2. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
3. The effect of composition and temperature on the properties of fly ash and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
4. Geopolymer materials prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
5. Properties of geopolymer cements
6. L. Weng, K. Sagoe-Crentsil, T. Brown, Speciation and hydrolysis kinetics of aluminates in inorganic polymer systems, presented to Geopolymer 2002 International Conference, 28–29 October, Melbourne, Australia.
7. Silicate complexes of aluminium (III) in aqueous systems10.1016/S0010-8545(01)00362-9 ↗
8. Interactions of silicate ions with zinc (II) and aluminium (III) in alkali aqueous solution10.1021/ic050594c ↗
9. Kinetics of silicate exchange in alakaline aluminosilicate solutions10.1021/ic0000707 ↗
10. The composition range of aluminosilicate polymers10.1016/j.jeurceramsoc.2004.06.001 ↗
11. Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite10.1039/b212629j ↗
12. Relationship between composition, structure and strength of inorganic polymers: part 1 — metakaolin-derived inorganic polymers10.1007/s10853-005-1226-2 ↗
13. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
14. Do geopolymers actually contain nanocrystalline zeolites? A re-examination of existing results10.1021/cm050230i ↗
15. Microstructure of sodium polysiatate siloxo geopolymer10.1016/j.ceramint.2004.06.006 ↗