journal article·2000-03

A study on high strength concrete prepared with large volumes of low calcium fly ash

C.S. Poon, L. Lam, Y.L. Wong

Cement and Concrete Research· Volume 30· Issue 3
Publisher page

Abstract

Abstract This paper presents the results of a laboratory study on high strength concrete prepared with large volumes of low calcium fly ash. The parameters studied included compressive strength, heat of hydration, chloride diffusivity, degree of hydration, and pore structures of fly ash/cement concrete and corresponding pastes. The experimental results showed that concrete with a 28-day compressive strength of 80 MPa could be obtained with a water-to-binder (w/b) ratio of 0.24, with a fly ash content of 45%. Such concrete has lower heat of hydration and chloride diffusivity than the equivalent plain cement concrete or concrete prepared with lower fly ash contents. The test results showed that at lower w/b ratios, the contribution to strength by the fly ash was higher than in the mixes prepared with higher w/b ratios. The study also quantified the reaction rates of cement and fly ash in the cementitious materials. The results demonstrated the dual effects of fly ash in concrete: (i) act as a micro-aggregate and (ii) being a pozzolana. It was also noted that the strength contribution of fly ash in concrete was better than in the equivalent cement/fly ash pastes suggesting the fly ash had improved the interfacial bond between the paste and the aggregates in the concrete. Such an improvement was also reflected in the results of the mercury intrusion porosimetry (MIP) test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Use of fly ash in concrete, ACI 226.3R-87
2. Guide for selecting proportions for high-strength concrete with Portland cement and fly ash, ACI 226.4R
3. Structural concrete incorporating high volumes of ASTM class F fly ash
4. Mechanical properties of concrete incorporating high volumes of fly ash from sources in the U.S.
5. C.W. Mok, Final year BEng student project report: Thermal properties of mass concrete. The Hong Kong Polytechnic University, 1996.
6. Early strength of fly ash concrete10.1016/0008-8846(94)90053-1 ↗
7. Fly ash as the ‘fourth ingredient’ in concrete mixtures
8. Cement equivalence factors10.1016/0008-8846(93)90162-3 ↗
9. Effect of fly ash and silica fume on compressive and fracture behaviors of concrete10.1016/S0008-8846(97)00269-X ↗
10. Effects of fly ash and silica fume on interfacial porosity of concrete10.1061/(ASCE)0899-1561(1999)11:3(197) ↗
11. Standard test method for electrical indication of concrete ability to resist chloride ion penetration
12. Taylor · 1990
13. Quantitative determination of fly ash in the hydrated fly ash–CaSO4·2H2O–Ca(OH)2 system10.1016/0008-8846(85)90047-X ↗
14. Quantitative determination of pozzolanas in hydrated system of cement or Ca(OH)2 with fly ash or silica fume10.1016/0008-8846(85)90100-0 ↗
15. Measurement of porosity in blended cement pastes10.1016/0008-8846(88)90122-6 ↗
16. J. Bijen, Ir.R. Selst, CUR Report 144, Fly ash as addition to concrete, Research carried out by INTRON, Institute for Material an Environmental Research B.V., A.A. Balkema, Rotterdam, 1992.
17. Effect of fly ash on the microstructure of cement mortar10.1007/BF02472942 ↗
18. Microstructure development in high volume fly ash–cement system10.1061/(ASCE)0899-1561(1994)6:1(117) ↗
19. Mechanisms of hydration reactions in high volume fly ash pastes and mortars10.1016/0958-9465(90)90004-H ↗
20. Hydration in high-volume fly ash concrete binders