journal article·2002-11

High-strength concrete with different fine aggregate

H Donza, O Cabrera, E.F Irassar

Cement and Concrete Research· Volume 32· Issue 11
Publisher page

Abstract

Abstract High-strength concrete (HSC) has undergone many developments based on the studies of influence of cement type, type and proportions of mineral admixtures, type of superplasticizer and the mineralogical composition of coarse aggregates. Most studies were carried out using natural sand with rounded and smooth grains. In practice, crushed sands from various sources are frequently used in concrete. In this paper, two aspects of the effect of crushed sands on HSCs are presented. First, the performance of crushed sands in relation to natural sand using a low water/cement (w/c) ratio and fixed coarse aggregate and cement content is analyzed. Results show that concrete with crushed sand requires an increase of superplasticizer to obtain the same slump. It also presents a higher strength than the corresponding natural sand concrete at all test ages, while its elastic modulus is lower at 28 days and is the same after that. Studies on the development of hydration and mortar phase of concrete show that the increase of strength can be attributed to the improvement of paste–fine aggregate transition zone. Second, the influence of the mineralogical source of the crushed sands was studied using three different types of crushed sands (granite, limestone and dolomite) with similar grading. Two mixtures containing 450 and 485 kg/m 3 cement and low w/c ratio are analyzed. Results show the adverse effects of shape and texture on workability of concrete, but the compressive strength of concrete is improved. Granite crushed sand appears as the most advantageous sand for this purpose.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Neville · 1993
2. CIRSOC 201-82, Code for Project, Design and Execution of Reinforced and Prestressed Concrete Structure, Ed. INTI, Argentina, 1982.
3. 1984
4. The fracture characteristics of crushed limestone sand concrete10.1016/S0008-8846(97)00156-7 ↗
5. High strength concrete with crushed fine aggregate
6. Effect of coarse aggregate characteristics on mechanical properties of high-strength concrete
7. High-strength concretes incorporating different coarse aggregates
8. Effect of coarse aggregate on elastic modulus and compressive strength of high performance concrete10.1016/0008-8846(94)00125-I ↗
9. Effect of coarse aggregate type on mechanical properties of concretes with different strengths10.1016/S0008-8846(97)00006-9 ↗
10. High-performance concrete: science and applications
11. The non evaporable water content of hardened Portland cement paste. Its significance for concrete research and its method of determination
12. Influence of aggregate surface area on mechanical properties of mortar
13. Using natural and crushed gravel for made high strength concrete
14. The influence of kinds of fine aggregate on mechanical properties of high strength concrete
15. The effect of stone dust content in sand10.1016/0008-8846(94)90147-3 ↗
16. Effects of crushed stone dust on some properties of concrete10.1016/0008-8846(96)00078-6 ↗
17. Portland cement concrete elaborated with by products of crushed rock
18. Influence of cement blend and aggregate type on stress–strain behaviour and elastic modulus of concrete