A process classification framework for defining and describing Digital Fabrication with Concrete
Source abstract
Abstract
Digital Fabrication with Concrete (DFC) encompasses 3D Concrete Printing (3DCP) and many other methods of production. DFC is emerging from an era of invention and demonstration to one where the merits of one principle over another needs to be quantified systematically. DFC technologies vary in characteristics, complexity and maturity which hampers the synthesis of research and comparisons of performance. The interdependence of design geometry, material properties and process characteristics is well recognised. Materials research has made significant progress in recent years and there have been many applications with varying design geometries demonstrated. Far less has been done to guide the definition and description of the processes used. This work takes a step forward by presenting classification and process description guidance for DFC. The approach was developed by engaging a broad cross-section of the international community through the activities of the RILEM Technical Committee 276 between 2016 and 2020.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · BIM and Construction Integration
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. HMGov
2. Siemens
3. Barbosa
4. Gibson · 2015
5. Implications on design of rapid manufacturing10.1243/095440603762554587 ↗
6. Developments in construction-scale additive manufacturing processes10.1016/j.autcon.2011.06.010 ↗
7. 3d printing using concrete extrusion: a roadmap for research10.1016/j.cemconres.2018.05.006 ↗
8. Digital concrete: a review10.1016/j.cemconres.2019.105780 ↗
9. Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3d-printing
10. Reiter L, Wangler T, Anton A, Flatt R, Setting on demand for digital concrete: principles, measurements, chemistry and validation. Cem. Conc. Res. (Digital Concrete 2020 Special Issue) (in press)., Elsevier , 2020 CEMCON_2020_50 - 10.1016/j.cemconres.2020.106047. In this issue.10.1016/j.cemconres.2020.106047 ↗
11. Lowke et al. , Particle-Bed 3d Printing With Cementitious Materials - How Material-Process Interactions Affect Component Properties, DC2020: Special Edition of Cement and Concrete Research (to Appear). CEMCON_2019_1619 - 10.1016/j.cemconres.2020.106077.
12. Lloret-Fritschi, E., Wangler, T., Gebhard, L., Mata-Falcón, J., Mantellato, S., Scotto, F., Burger, J., Szabó, A., Ruffray, N., Reiter, L., Boscaro, F., Kaufmann, W., Kohler, M., Gramazio, F., and R.J. Flatt. From Smart Dynamic Casting to a growing family of Digital Casting Systems. Cem. Conc. Res. (Digital Concrete 2020 Special Issue) (in press). CEMCON_2019_1599 - 10.1016/j.cemconres.2020.106078.10.1016/j.cemconres.2020.106071 ↗
13. Kloft, Additive Manufacturing of Large-Format Reinforced Concrete Elements by Shotcrete 3d Printing (sc3dp), DC2020: Special Edition of Cement and Concrete Research (To Appear). CEMCON_2019_1514 - 10.1016/j.cemconres.2020.106071.
14. Exploratory investigation of solid freeform construction10.1016/S0926-5805(96)00166-5 ↗
15. Hardened properties of high-performance printing concrete10.1016/j.cemconres.2011.12.003 ↗
16. Mega-scale fabrication by contour crafting
17. Additive construction: state-of-the-art, challenges and opportunities10.1016/j.autcon.2016.08.026 ↗
18. Applications of additive manufacturing in the construction industry–a prospective review
19. Digital concrete: opportunities and challenges10.21809/rilemtechlett.2016.16 ↗
20. Toward site-specific and self-sufficient robotic fabrication on architectural scales10.1126/scirobotics.aam8986 ↗
21. Agusti-Juan · 2018
22. Additive Manufacturing Processes for Infrastructure Construction: A Review
23. Particle-bed 3d printing in concrete construction – possibilities and challenges10.1016/j.cemconres.2018.05.018 ↗
24. ISO 52900 · 2017 · 2017
25. Penetration of cement pastes into sand packings during 3d printing: analytical and experimental study10.1617/s11527-018-1148-5 ↗
26. Classification of building systems for concrete 3D printing10.1016/j.autcon.2017.08.018 ↗
27. The effect of viscosity-modifying admixture on the extrudability of limestone and calcined clay-based cementitious material for extrusion-based 3d concrete printing
28. Processing of set on demand solutions for digital fabrication in architecture
29. Evaluation of early-age concrete structural build-up for 3d concrete printing by oscillatory rheometry
30. Large-scale 3d printing of ultra-high performance concrete – a new processing route for architects and builders10.1016/j.matdes.2016.03.097 ↗
31. Residence time distributions in continuous processing of concrete
32. Groover · 2012
33. ISO 17296-3 · 2016
34. ISO 17296-2 · 2015 · 2015
35. Flexible formwork technologies – a state of the art review10.1002/suco.201600117 ↗
36. Mapping double-curved surfaces for production of precast concrete shell elements
37. Design of a 3d printed concrete bridge by testing10.1080/17452759.2018.1476064 ↗
38. New carbon fiber reinforcement for digital concrete construction10.1002/best.201900058 ↗
39. Modelling curved-layered printing paths for fabricating large-scale construction components
40. Study on the influence of accelerators on the hydration of portland cement and their applicability in 3d printing
41. Hydration and rheology control of concrete for digital fabrication: potential admixtures and cement chemistry10.1016/j.cemconres.2018.05.014 ↗
42. The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3d printed concrete10.3390/ma12132149 ↗
43. Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3d-printing10.1016/j.conbuildmat.2019.01.235 ↗
44. Hardened properties of 3d printed concrete: the influence of process parameters on interlayer adhesion10.1016/j.cemconres.2019.02.017 ↗
45. Structural failure during extrusion-based 3d printing processes10.1007/s00170-019-03844-6 ↗
46. The role of early age structural build-up in digital fabrication with concrete10.1016/j.cemconres.2018.05.011 ↗
47. Development of the construction processes for reinforced additively constructed concrete
48. Mesh reinforcing method for 3d concrete printing10.1016/j.autcon.2019.102992 ↗
49. Experimental exploration of metal cable as reinforcement in 3d printed concrete10.3390/ma10111314 ↗
50. Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review10.1016/j.cemconres.2020.106037 ↗
51. 3d-printed steel reinforcement for digital concrete construction – manufacture, mechanical properties and bond behavior10.1016/j.conbuildmat.2018.05.202 ↗
52. Hardened properties of 3d printable ultra-high performance fiber-reinforced concrete for digital construction applications
53. Developing and testing of strain-hardening cement-based composites (shcc) in the context of 3d-printing10.3390/ma11081375 ↗
54. Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3d printing10.1016/j.conbuildmat.2019.01.008 ↗
55. An approach to develop printable strain hardening cementitious composites
56. Damen
57. Shayani · 2018
58. Griffiths
59. Development of a shotcrete 3d-printing (sc3dp) technology for additive manufacturing of reinforced freeform concrete structures
60. Large scale 3d concrete printing – basic principles of 3d concrete printing