Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes
Source abstract
Abstract
This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the fine pore structure of AAMs pastes, drastic drop of internal relative humidity is observed and large pore pressure is generated. The pore pressure induces not only elastic deformation but also a large creep of the paste. Besides the pore pressure, other driving forces, like the reduction of steric-hydration force due to the consumption of ions, also cause a certain amount of shrinkage, especially in the acceleration period. Based on the mechanisms revealed, a computational model is proposed to estimate the autogenous shrinkage of AAMs. The calculated autogenous shrinkage matches well with the measured results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
2. Alkali-activated slag cement concrete
3. The role of inorganic polymer technology in the development of “green concrete”10.1016/j.cemconres.2007.08.018 ↗
4. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
5. Provis · 2009
6. A review on the durability of alkali-activated Fly ash/slag systems: advances, issues, and perspectives10.1021/acs.iecr.6b00559 ↗
7. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
8. Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends10.1016/j.ceramint.2014.09.075 ↗
9. Binding mechanism and properties of alkali-activated fly ash/slag mortars10.1016/j.conbuildmat.2012.11.003 ↗
10. Magnesia modification of alkali-activated slag fly ash cement10.1007/s11595-011-0182-8 ↗
11. Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers10.1016/j.conbuildmat.2013.09.048 ↗
12. Hu · 2013
13. Properties of alkali-activated fly ash concrete blended with slag
14. Effect of pore size distribution on drying shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
15. Prediction of self-desiccation in low water-to-cement ratio pastes based on pore structure evolution10.1016/j.cemconres.2013.03.013 ↗
16. Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages10.1016/j.cemconcomp.2014.07.007 ↗
17. Autogenous shrinkage of alkali activated slag mortars: basic mechanisms and mitigation methods10.1016/j.cemconres.2018.04.004 ↗
18. Shrinkage characteristics of alkali-activated slag cements
19. Shrinkage mechanisms of alkali-activated slag10.1016/j.cemconres.2016.07.001 ↗
20. Shrinkage and creep behavior of an alkali-activated slag concrete10.1002/suco.201600147 ↗
21. Understanding the autogenous shrinkage in alkali-activated slag/fly-ash blends
22. Mechanisms of autogenous shrinkage of alkali-activated fly ash-slag pastes cured at ambient temperature within 24 h10.1016/j.conbuildmat.2018.03.155 ↗
23. A ternary optimisation of mineral additives of alkali activated cement mortars10.1016/j.conbuildmat.2013.02.005 ↗
24. The shrinkage of alkali activated fly ash10.1016/j.cemconres.2014.10.024 ↗
25. Nedeljković · 2019
26. Setting, strength, and autogenous shrinkage of alkali-activated Fly ash and slag pastes: effect of slag content10.3390/ma11112121 ↗
27. Autogenous shrinkage of alkali-activated slag-fly ash pastes
28. ASTM C191-18a · 2019 · 1
29. ASTM C1968 · 2013 · 1
30. Measurement with corrugated tubes of early-age autogenous shrinkage of cement-based materials
31. Experimental study on autogenous deformation of metakaolin based geopolymer
32. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres10.1016/S0008-8846(03)00222-9 ↗
33. Preparation of geopolymeric materials from Fly ash filler by steam curing with special reference to binder products10.2109/jcersj.113.82 ↗
34. The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms10.1021/ja01145a126 ↗
35. ASTM C 1608 · 2007 · 667
36. Chemical deformation of metakaolin based geopolymer10.1016/j.cemconres.2019.03.017 ↗
37. Examining the “time-zero” of autogenous shrinkage in high/ultra-high performance cement pastes10.1016/j.cemconres.2017.03.010 ↗
38. Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique10.1617/s11527-011-9750-9 ↗
39. Assessing the autogenous shrinkage of alkali- activated slag/fly ash mortar blends
40. AUTOGENOUS SHRINKAGE OF ALKALI-ACTIVATED FLY ASH-SLAG PASTES WITH AND WITHOUT SAP
41. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
42. Theories of expansion in sulfoaluminate-type expansive cements: schools of thought10.1016/0008-8846(83)90082-0 ↗
43. Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosificates10.1021/la026127e ↗
44. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O10.1016/j.cemconres.2011.05.006 ↗
45. Waste glass as partial mineral precursor in alkali-activated slag/fly ash system10.1016/j.cemconres.2017.08.012 ↗
46. The mechanism of geopolymer gel formation investigated through seeded nucleation10.1016/j.colsurfa.2007.12.019 ↗
47. Effect on fresh C-S-H gels of the simultaneous addition of alkali and aluminium10.1016/j.cemconres.2009.08.004 ↗
48. Mitigating the autogenous shrinkage of alkali-activated slag by metakaolin10.1016/j.cemconres.2019.04.016 ↗
49. Reactivity and reaction products of alkali-activated, fly ash/slag paste10.1016/j.conbuildmat.2015.02.022 ↗
50. Reaction kinetics in sodium silicate powder and liquid activated slag binders evaluated using isothermal calorimetry10.1016/j.tca.2012.07.010 ↗
51. Ma · 2013
52. Yu · 2015
53. Valorisation of Fly ashes by Geopolymerisation
54. Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends10.1016/j.conbuildmat.2015.01.065 ↗
55. Effects of dosage and modulus of water glass on early hydration of alkali-slag cements10.1016/S0008-8846(01)00717-7 ↗
56. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
57. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - part II: effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
58. Characterization and comparison of capillary pore structures of digital cement pastes
59. Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement10.1016/j.conbuildmat.2016.03.043 ↗
60. Autogenous deformation and RH-change in perspective10.1016/S0008-8846(01)00501-4 ↗
61. Lura · 2003
62. Sur les changements de volume qui accompagnent le durcissement des ciments
63. The equivalent pore pressure and the swelling and shrinkage of cement-based materials10.1007/BF02481623 ↗
64. Zuo · 2019
65. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
66. Lu · 2019
67. Expansive admixtures (mainly ettringite)10.1016/S0958-9465(97)00064-4 ↗
68. Effects of nano-TiO2on strength, shrinkage and microstructure of alkali activated slag pastes10.1016/j.cemconcomp.2014.11.009 ↗
69. Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes10.1016/j.cemconres.2006.11.021 ↗
70. Apply29Si,27Al MAS NMR and selective dissolution in identifying the reaction degree of alkali activated slag-fly ash composites10.1016/j.ceramint.2017.06.108 ↗
71. A model for the CASH gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
72. Israelachvili · 2011
73. Understanding the adhesion mechanisms between C-S-H and fillers10.1016/j.cemconres.2017.07.006 ↗
74. Mechanism of the initial events in the sorption of marine bacteria to surfaces
75. The DLVO theory in microbial adhesion10.1016/S0927-7765(99)00029-6 ↗
76. N. V Churaev, B. V Derjaguin, V.M. Muller, Surface Forces, Springer Science & Business Media, 2013.
77. Verwey · 1999
78. Ouyang · 2017
79. Microscopic physical basis of the poromechanical behavior of cement-based materials10.1007/BF02481622 ↗
80. The interaction of solid surfaces in aqueous systems10.1007/BF01448150 ↗
81. Entropic forces between amphiphilic surfaces in liquids10.1021/j100181a007 ↗
82. Pore solution composition of alkali-activated slag/fly ash pastes10.1016/j.cemconres.2018.10.010 ↗
83. The chemistry of the pore fluid of silica fume-blended cement systems10.1016/0008-8846(90)90095-F ↗
84. Others, alkali concentrations of pore solution in hydrating OPC10.1016/S0008-8846(02)01022-0 ↗
85. Internal curing by superabsorbent polymers in alkali-activated slag10.1016/j.cemconres.2020.106123 ↗
86. Modeling the linear elastic properties of Portland cement paste10.1016/j.cemconres.2005.05.001 ↗
87. Ye · 2003
88. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
89. Accurate determination of the “time-zero” of autogenous shrinkage in alkali-activated fly ash/slag system10.1016/j.compositesb.2019.107367 ↗
90. Modelling drying shrinkage in reconstructed porous materials: application to porous Vycor glass10.1088/0965-0393/6/3/002 ↗
91. Prinsse · 2017
92. Nielsen · 1991
93. Van Breugel · 1980 · 144
94. Creep model uncertainties in early-age concrete simulations
95. Drying shrinkage of alkali-activated slag and fly ash concrete; a comparative study with ordinary Portland cement concrete
96. Experimental study on creep behavior of alkali-activated concrete
97. Mechanical properties of cement pastes and mortars at early ages: evolution with time and degree of hydration
98. Cracking potential of alkali-activated slag and fly ash concrete subjected to restrained autogenous shrinkage10.1016/j.cemconcomp.2020.103767 ↗
99. Influence of aggregate restraint on volume changes: Experiments and Modelling
100. Influence of aggregate restraint on the shrinkage of concrete