Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay – Limestone Portland cements
Source abstract
Abstract
Abstract Workability and strength performance of blended cements with different replacement levels have been investigated for two calcined clay mineral additions (1:1 and 2:1 type) and mixtures with limestone. The effect of fly ash addition and different water-to-cementitious ratios was also evaluated. The results show that the SO 3 content of the blended cements, and the ratio of calcined clay to limestone, can be optimized for maximum strength depending on the content of early soluble and total reactive alumina in the calcined clay. Workability is strongly affected by the calcined clay content, particularly for the 1:1 clay which greatly reduces the efficiency of superplasticizer (SP) required for achieving acceptable flow even at higher w/c ratios. On the other hand, delayed addition of the SP and/or the addition of fly ash significantly improve rheology of any binder containing calcined clay and maximize strength for same workability at a given clinker content in the paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Options for the future of cement
2. Thomas · 2007
3. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete10.1016/0008-8846(96)00148-2 ↗
4. Mineral admixtures
5. Metakaolin and calcined clays as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
6. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
7. Experimental studies and thermodynamic modeling of the carbonation of Portland cement, metakaolin and limestone mortars10.1016/j.cemconres.2016.06.006 ↗
8. Compatibility of superplasticizers with limestone-metakaolin blended cementitious system
9. Fresh and mechanical properties of high strength self compacting concrete using metakaolin
10. Influence of dispersing agents on the rheology and early heat of hydration of blended cements with high loading of calcined marl10.1016/j.cemconcomp.2015.04.007 ↗
11. Ng · 2015
12. The origin of the pozzolanic activity of calcined clay minerals: a comparison between kaolinite, illite and montmorillonite10.1016/j.cemconres.2010.09.013 ↗
13. Pozzolanic reactions of six principal clay minerals: activation, reactivity assessments and technological effects10.1016/0008-8846(95)00165-4 ↗
14. Investigation of ternary mixes made of clinker limestone and slag or metakaolin: importance of reactive alumina and silica content
15. Design and control of concrete mixtures
16. Scheydt · 2008 · 69
17. Calorimetry
18. Garg · 2015
19. Cement substitution by a combination of metakaolin and limestone10.1016/j.cemconres.2012.09.006 ↗
20. Kinetic study of the kaolinite-mullite reaction sequence. Part I: kaolinite dihydroxylation10.1007/BF00202253 ↗
21. The role of calcium carbonate in cement hydration10.1016/j.cemconres.2006.10.013 ↗
22. Taylor · 1997
23. Meta-kaolin for high performance concrete
24. Connection between the rheology of concrete and rheology of cement paste