journal article·2003-10

High-strength lightweight concrete made with scoria aggregate containing mineral admixtures

Alaettin Kılıç, Cengiz Duran Atiş, Ergül Yaşar, Fatih Özcan

Cement and Concrete Research· Volume 33· Issue 10
Publisher page

Abstract

Abstract This paper presents a part of the results of an ongoing laboratory work carried out to design a structural lightweight high strength concrete (SLWHSC) made with and without mineral admixtures. In the mixtures, basaltic-pumice (scoria) was used as lightweight aggregate. A control lightweight concrete mixture made with lightweight basaltic-pumice (scoria) containing normal Portland cement as the binder was prepared. The control lightweight concrete mixture was modified by replacing 20% of the cement with fly ash. The control lightweight concrete mixture was also modified by replacing 10% of the cement with silica fume. A ternary lightweight concrete mixture was also prepared modifying the control lightweight concrete by replacing 20% of cement with fly ash and 10% of cement with silica fume. Two normal weight concrete (NWC) were also prepared for comparison purpose. Fly ash and silica fume are used for economical and environmental concerns. Cylinder specimens with 150 mm diameter and 300 mm height and prismatic specimens with dimension 100×100×500 mm were cast from the fresh mixtures to measure compressive and flexural tensile strength. The concrete samples were cured at 65% relative humidity with 20 °C temperature. The density and slump workability of fresh concrete mixtures were also measured. Laboratory test results showed that structural lightweight concrete (SLWC) can be produced by the use of scoria. However, the use of mineral additives seems to be mandatory for production of SLWHSC. The use of ternary mixture was recommended due to its satisfactory strength development and environmental friendliness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Semi-lightweight concretes produced by volcanic slags10.1016/S0008-8846(96)00190-1 ↗
2. Effect of initial curing on early strength and physical properties of lightweight concrete10.1016/S0008-8846(98)00051-9 ↗
3. Lightweight concrete in hot coastal areas10.1016/S0958-9465(99)00035-9 ↗
4. Effects of expanded perlite aggregate and mineral admixtures on the compressive strength of low-density concretes10.1016/S0008-8846(01)00615-9 ↗
5. Flexural behaviour of composite reinforced concrete elements10.1061/(ASCE)0899-1561(2001)13:4(255) ↗
6. Erdogan · 1997
7. Mehta · 1986
8. Neville · 1995
9. Standard specification for fly ash and raw calcined natural pozzolan for use as a mineral admixture in Portland cement concrete
10. M. Tokyay, K. Erdogdu, Characterization of fly ash obtained from Turkish thermal power plant, TÇMB/ARGE/Y98.3, Ankara, Turkey, 1998.
11. The use of a non-standard high calcium fly ash in concrete and its response to accelerated curing10.3989/mc.2002.v52.i267.322 ↗
12. The use of Afsin-Elbistan fly ash as an admixture in concrete
13. U.K. Sevim, An investigation on the use of Afsin-Elbistan fly ash as cement replacement materials by testing properties of paste and mortars, PhD Thesis, Cukurova University, Civil Engineering Dept., Adana, Turkey, in preparation.
14. TSI, TS 706-Aggregate for concretes, Ankara, Turkey, 1980.
15. T.A. Holm, T.W. Bremner, State of the art report on high strength, high durability structural low-density concrete for applications in severe marine environments, US Army Corps of Engineers, Engineering Research and Development Center, ERDC/SL TR-00-3, 2000.
16. Lightweight Concrete and Aggregates
17. IMO · 1997