journal article·2005-02

The effect of excessive steam curing on Portland composite cement concrete

Selcuk Türkel, Volkan Alabas

Cement and Concrete Research· Volume 35· Issue 2
Publisher page

Abstract

Abstract Steam curing at atmospheric pressure is an important technique for obtaining high early strength values in precast concrete production. Cement type, as well as curing period and temperature, is an important parameter in the steam-curing process. PC42.5 is the type of cement that is most commonly used in Turkish precast concrete plants. Its behavior is well known. Nowadays, the production of composite cements is becoming more popular every other day due to its advantages. The object of this study was to determine the properties of this relatively new binder comparatively with conventional PC42.5 under steam curing. For this purpose, 15-cm concrete cubes were prepared with a water/cement ratio (W/C) of 0.44 and were subjected to steam curing for five different curing periods of 4, 8, 16, 24 and 36 h under curing temperatures of 65 and 85 °C. Cement dosage was kept constant (400 kg/m3) for all specimens. The variation of compressive strength values and maturity for each condition has been presented comparatively within this study. Test results indicated that Portland composite cement (PKC/A42.5) can be used in place of PC42.5 for steam curing at atmospheric pressure in precast concrete production. However, in case of early high strength demand for early demolding purposes, curing temperature should be increased to 85 °C for PKC/A42.5 cement concretes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Optimum steam curing procedure in precasting plants
2. Neville · 1997
3. Mindess · 1981
4. Determination of heat treatment cycle for cements (in Turkish), Turkish cement manufacturers' association
5. Optimum heat treatment cycle for cements of different type and composition10.1016/S0008-8846(98)00134-3 ↗
6. ACI 517.2 R-87, Accelerated Curing of Concrete at Atmospheric Pressure-State of the Art, ACI Manual of Concrete 1992, Revised.
7. Setting time: an important criterion to determine the length of the delay period before steam curing of concrete10.1016/S0008-8846(02)01058-X ↗
8. Rate constant functions for strength development of concrete
9. Maturity functions for concretes made with various cement and admixtures
10. Principles underlying the steam curing of concrete at atmospheric pressure10.1680/macr.1951.2.6.127 ↗
11. B. Baradan, H. Un, Mechanical Properties Development of Mortars by Using Different Types of Cement Under Different Climate and Curing Conditions, Final Report, Turkish Cement Manufacturers' Association, 2002, in Turkish.
12. Later-age strength prediction by a modified maturity model