Deriving early hydration cement paste phase assemblage, microstructure development and elastic properties using thermodynamic simulation and multi-scale material modeling
Source abstract
Abstract
Many hydration models focus on predicting the long-term hydration process and resulting material changes without specifically addressing early hydration within the first day. Here, we present a new approach for predicting early hydration cement paste phase assemblage, microstructure development and elastic properties by applying thermodynamic modeling and simulation as input to a multi-scale material model. Cement dissolution for implementation within the thermodynamic simulation is derived by fitting the five-parameter logistic function (5PL) to experimental data from quantitative X-ray diffraction. Results are compared with simulations using the modified Parrot & Killoh model for cement dissolution. Further, the influence of variations in the calcium sulphate and calcite content of the initial cement phase assemblage is investigated accounting for errors in experimental determination. The proposed model for hydrating cement paste accounts for all phases predicted by the thermodynamic simulation output, two types of C-S-H, as well as concentric growth of hydrates from the surface of the clinker grains. The stiffness of the hydrating cement paste is derived by upscaling the microscopic properties using a multi-level continuum micromechanics homogenization scheme. Model predictions are compared with experimental results from penetration tests and ultrasonic Young’s modulus determination. It is shown, that 5PL dissolution modeling in combination with thermodynamic simulation is able to describe early hydration cement phase alterations. The 5PL approach thereby captures initial ettringite formation and accurately describes portlandite precipitation. However, the results are highly dependent on the quality of the experimental data. The results further illustrate, how cement paste stiffness development can be derived by application of low-cost computational methods. The proposed approach enables investigations of state-of-the-art questions of cement hydration including the influence of individual hydrate phases on the solidification process. • Early age clinker dissolution follows a five-parameter logistic function (5PL). • Input from 5PL allows prediction of initial dissolution followed by low reactivity. • The approach predicts initial ettringite formation and its later decomposition. • The degree of hydration alone is not sufficient to accurately predict percolation. • Sulfate containing phases contribute significantly to overall strength development.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. 3D Printing of Buildings and Building Components as the Future of Sustainable Construction?10.1016/j.proeng.2016.07.357 ↗
2. Research review of cement clinker chemistry10.1016/j.cemconres.2015.05.018 ↗
3. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
4. Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing10.1016/j.cemconres.2018.02.001 ↗
5. A review of 3D printed concrete: Performance requirements, testing measurements and mix design10.1016/j.conbuildmat.2020.121745 ↗
6. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials10.1016/S0008-8846(03)00039-5 ↗
7. The effect of two types of C–S–H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling10.1016/S0008-8846(03)00230-8 ↗
8. Modelling elasticity of a hydrating cement paste10.1016/j.cemconres.2007.07.003 ↗
9. Prediction of elastic properties of cement pastes at early ages10.1016/j.commatsci.2009.11.003 ↗
10. Upscaling quasi-brittle strength of cement paste and mortar: A multi-scale engineering mechanics model10.1016/j.cemconres.2011.01.010 ↗
11. Estimating the mechanical properties of hydrating blended cementitious materials: An investigation based on micromechanics10.1016/j.cemconres.2017.10.018 ↗
12. Microstructural simulation and measurement of elastic modulus evolution of hydrating cement pastes
13. A two-stage model for the prediction of mechanical properties of cement paste10.1016/j.cemconcomp.2020.103853 ↗
14. Multi-scale strategy to estimate the mechanical and diffusive properties of cementitious materials prepared with CEM II/C-M
15. The hydration of cement paste: Thermodynamics driven multi-scale modeling of elastic properties and coda wave interferometry based monitoring
16. Bentz · 2005
17. A three-dimensional microstructural model of reactions and transport in aqueous mineral systems10.1088/0965-0393/15/7/002 ↗
18. Studies of the physical properties of hardened cement pastes
19. Micromechanical Analysis of Creep and Shrinkage Mechanisms
20. Densification of C–S–H Measured by 1 H NMR Relaxometry10.1021/jp3102964 ↗
21. Mix-, storage- and temperature-invariant precipitation characteristics in white cement paste, expressed through an NMR-based analytical model
22. Multiscale poro-elasticity of densifying calcium-silicate hydrates in cement paste: An experimentally validated continuum micromechanics approach10.1016/j.ijengsci.2019.103196 ↗
23. Prediction of Cement Hydration
24. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
25. Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement10.1016/j.cemconres.2007.08.017 ↗
26. Impact of microstructure on the performance of composite cements: Why higher total porosity can result in higher strength10.1016/j.cemconcomp.2018.03.023 ↗
27. Multi-scale experimental investigation and analytical micro-mechanical modeling to determine Young’s modulus of alkali-activated slag concrete
28. CemGEMS – An easy-to-use web application for thermodynamic modelling of cementitious materials10.21809/rilemtechlett.2021.140 ↗
29. The hydration of synthetic brownmillerite in presence of low Ca-sulfate content and calcite monitored by quantitative in-situ-XRD and heat flow calorimetry10.1016/j.cemconres.2013.08.011 ↗
30. Alite dissolution and C–S–H precipitation rates during hydration10.1016/j.cemconres.2018.09.001 ↗
31. The five-parameter logistic: A characterization and comparison with the four-parameter logistic10.1016/j.ab.2005.04.035 ↗
32. Thermodynamic modelling of the hydration of Portland cement10.1016/j.cemconres.2005.03.001 ↗
33. Application of thermodynamic modelling to hydrated cements
34. μic: A new platform for modelling the hydration of cements10.1016/j.cemconres.2008.12.002 ↗
35. Modeling and simulation of cement hydration kinetics and microstructure development10.1016/j.cemconres.2010.10.004 ↗
36. Computational materials science of cement-based materials10.1007/BF02472611 ↗
37. Mechanical properties of cement pastes and mortars at early ages
38. Porous polycrystals built up by uniformly and axisymmetrically oriented needles: homogenization of elastic properties10.1016/j.crme.2006.01.008 ↗
39. From micron-sized needle-shaped hydrates to meter-sized shotcrete tunnel shells: micromechanical upscaling of stiffness and strength of hydrating shotcrete10.1007/s11440-008-0074-z ↗
40. Cement hydration mechanisms through time – a review10.1007/s10853-023-08651-9 ↗
41. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
42. Advances in understanding cement hydration mechanisms10.1016/j.cemconres.2019.105823 ↗
43. Jägle · 2024
44. 2011
45. Ouzia · 2019 · 288
46. 2016
47. Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials10.1016/j.cemconres.2018.04.018 ↗
48. The Rietveld method10.1088/0031-8949/89/9/098002 ↗
49. TOPAS and TOPAS-Academic : an optimization program integrating computer algebra and crystallographic objects written in C++10.1107/S1600576718000183 ↗
50. In-situ laboratory X-ray diffraction applied to assess cement hydration10.1016/j.cemconres.2022.106988 ↗
51. Recent developments in the Inorganic Crystal Structure Database: theoretical crystal structure data and related features10.1107/S160057671900997X ↗
52. 2017
53. Recommendation of RILEM TC 218-SFC: Sonic methods for quality control of fresh cementitious materials*10.1617/s11527-011-9734-9 ↗
54. Bahr · 2012
55. Lehmann · 2012
56. Theoretical concepts of stress wave propagation in solids
57. Effect of temperature on the hydration of the main clinker phases in Portland cements: part i, neat cements10.1016/S0008-8846(98)00115-X ↗
58. Effect of temperature on the hydration of the main clinker phases in Portland cements: part ii, blended cements10.1016/S0008-8846(98)00107-0 ↗
59. Maturity Computer for Controlled Curing and Hardening of Concrete
60. The Maturity Method: Theory and Application10.1520/CCA10358J ↗
61. Über die Dissociationswärme und den Einfluss der Temperatur auf den Dissociationsgrad der Elektrolyte10.1515/zpch-1889-0408 ↗
62. 2011
63. GEMS Development Team, GEM-Selektor v.3 (GEMS3), URL https://gems.web.psi.ch.
64. Gem-selektor geochemical modeling package: TSolMod library and data interface for multicomponent phase models10.3749/canmin.50.5.1173 ↗
65. GEM-Selektor geochemical modeling package: Revised algorithm and GEMS3K numerical kernel for coupled simulation codes
66. Round robin on Rietveld quantitative phase analysis of Portland cements10.1107/S0021889809028374 ↗
67. Simulation of chloride diffusion tests in cement paste and mortar made with CEM II and CEM VI cements
68. Fylak · 2011 · 225
69. SciPy 1.0: Fundamental Algorithms for Scientific Computing in Python10.1038/s41592-019-0686-2 ↗
70. T. Thoenen, W. Hummel, U. Berner, E. Curti, The PSI/Nagra Chemical Thermodynamic Database 12/07, PSI Report 14-04, Villingen PSI, Switzerland, 2014, URL https://www.dora.lib4ri.ch/psi/islandora/object/psi%3A29731/datastream/PDF/Thoenen-2014-The_PSI-Nagra_chemical_thermodynamic_database_12-07-%28published_version%29.pdf.
71. Empa · 2024
72. Improving the structural consistency of C–S–H solid solution thermodynamic models10.1016/j.cemconres.2011.01.012 ↗
73. The Microstructure of Anhydrous Cement and its Effect on Hydration10.1557/PROC-85-39 ↗
74. Scanning electron microscopy imaging of hydraulic cement microstructure10.1016/j.cemconcomp.2004.02.043 ↗
75. Phase analysis of Portland cement by combined quantitative X-ray powder diffraction and scanning electron microscopy10.6028/jres.121.004 ↗
76. The nature of C–S–H in hardened cements10.1016/S0008-8846(99)00168-4 ↗
77. Proposed mechanism of C–S–H growth tested by soft X-ray microscopy10.1016/S0008-8846(00)00235-0 ↗
78. Composition and structure of C–S–H in white Portland cement–20 25 °C10.1016/j.cemconres.2006.11.012 ↗
79. Composition, morphology and nanostructure of C–S–H in 70% white Portland cement–30% fly ash blends hydrated at 55 °C10.1016/j.cemconres.2010.03.012 ↗
80. Composition of C–S–H in pastes with increasing levels of silica fume addition10.1016/j.cemconres.2015.04.016 ↗
81. Scanning Electron Microscopy in Concrete Petrography
82. SEM Investigation of Microstructures in Hydration Products of Portland Cement10.1007/978-3-319-16919-4_14 ↗
83. Scanning electron micrographic studies of ettringite formation10.1016/0008-8846(76)90115-0 ↗
84. The formation of ettringite at elevated temperature10.1016/0008-8846(93)90052-B ↗
85. Analysis of C3A hydration using soft X-rays transmission microscopy: Effect of EVA copolymer10.1016/j.cemconres.2005.02.002 ↗
86. Relating ettringite formation and rheological changes during the initial cement hydration: A comparative study applying XRD analysis, rheological measurements and modeling10.3390/ma12182957 ↗
87. Study of nucleation and growth processes of ettringite in diluted conditions10.1016/j.cemconres.2019.105915 ↗
88. Hydration states of AFm cement phases10.1016/j.cemconres.2015.02.011 ↗
89. The AFm phase in Portland cement10.1016/j.cemconres.2006.10.010 ↗
90. The Early Age Hydration Products and Mechanical Properties of Cement Paste with Steel Slag Powder as Additive under Steam Curing Conditions10.3390/buildings13092192 ↗
91. Environmental impact and sustainability of calcium aluminate cements10.3390/su14052751 ↗
92. Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker10.1016/S0008-8846(00)00505-6 ↗
93. Characterisation of Interstitial Transition Zone ( ITZ ) of High Performance Cement By Nanoindentation Technique
94. Microstructure-based micromechanical prediction of elastic properties in hydrating cement paste10.1016/j.cemconres.2006.05.014 ↗
95. A survey of the engineering properties of some anhydrite and gypsum from the north and midlands of England10.1016/0013-7952(94)90021-3 ↗
96. Modeling the linear elastic properties of Portland cement paste10.1016/j.cemconres.2005.05.001 ↗
97. Landolt-Bornstein: numerical data and functional relationships in science and technology new series
98. Landolt–Bornstein: numerical data and functional relationships in science and technology new series
99. Bass · 1995 · 45
100. J. Beaudoin, R. Feldman, Dependence of Degree of Silica Polymerization and Intrinsic Mechanical Properties of C–S–H- on C / S Ratio, in: 8th International Congress on the Chemistry of Cement, Rio de Janeiro, Brazil, September 22–27, 1986, pp. 1–6.