journal article·2006-07

Influences of water by cement ratio on mechanical properties of mortars submitted to drying

Ismail Yurtdas, He Peng, Nicolas Burlion, Frédéric Skoczylas

Cement and Concrete Research· Volume 36· Issue 7
Publisher page

Abstract

Concrete materials are submitted to drying when the relative humidity of their surrounding is decreasing. The main purpose of this study is to highlight the variation of multiaxial mechanical behaviour of mortars which depends on desiccation level and cement paste properties (quality). The behaviour under discussion includes uniaxial and triaxial strengths, elastic properties and volumetric strains due to hydrostatic loading. Multiaxial experiments, carried out on two mortars for which the only difference was the water by cement ratio (w / c = 0.5 and 0.8), show a competitive effect between the increase in material rigidity due to capillary suction and saturation gradients, and the microcracking which comes from material heterogeneity and differential shrinkages of the sample. This effect mainly depends on cement paste properties and its porosity; therefore the capillary suction effect is preponderant for a high paste quality (i.e. lower porosity) while a low paste quality would be more sensitive to microcracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Bažant · 1982
2. P. Acker, Comportement mécanique du béton: apport de l'approche physico-chimique, PhD thesis of Ecole Nationale des Pont et Chaussées, Paris, Rapport de Recherche LPC n°152 (in French), 1988.
3. Nonlinear water diffusion in nonsaturated concrete
4. Creep and shrinkage mechanisms
5. V. Baroghel-Bouny, Caractérisation des pâtes de ciment et des bétons, PhD thesis of Ecole Nationale des Ponts et Chaussées, Paris (in French), 1994.
6. Effect of curing method and moisture condition on compressive strength of concrete
7. Effect of moisture condition on concrete core strengths
8. J.-M. Torrenti, Comportement multiaxial du béton: aspects expérimentaux et modélisation, PhD thesis of Ecole Nationale des Pons et Chaussées, Paris, (in French), 1987.
9. Effect of shrinkage and load-induced cracking on water permeability of concrete
10. Effect of aggregate size and paste volume on drying shrinkage microcracking in cement-based composites
11. Effect of cracking in drying and shrinkage specimens10.1016/0008-8846(82)90008-4 ↗
12. Experimental study on drying shrinkage of ordinary and high-performance cementitious materials
13. Induced anisotropic permeability due to drying of concrete10.1016/S0008-8846(02)01039-6 ↗
14. I. Yurtdas, Couplage comportement mécanique et dessiccation des matériaux à matrice cimentaire: étude expérimentale sur mortiers, PhD thesis of Université des Sciences et Technologies de Lille and Ecole Centrale de Lille, Lille (in French), 2003.
15. The moist curing of concrete
16. The effect of air drying before test: 28-day strength of concrete
17. Strength–maturity relationship for concrete which is allowed to dry
18. Surface tension, shrinkage and strength of hardened cement paste
19. A review of some of the main results of a research on the ageing phenomena of concrete, effect of moisture conditions on strength, shrinkage and creep of mature concrete10.1016/0008-8846(74)90048-9 ↗
20. A comparison of creep, elasticity, and strength of concrete in tension and compression10.1680/macr.1977.29.100.131 ↗
21. Moisture effect on the mechanical properties of cement mortar
22. P. Dantec, G. Terme, Séchage et comportement différé du béton : influence de la cinétique de dessiccation sur le comportement des bétons (in French), Rapport du LCPC, n° 1.41.02.5, 1996.
23. Effect of desiccation on mechanical behaviour of concrete10.1016/j.cemconcomp.2004.05.004 ↗
24. Concrete under triaxial stress10.1680/macr.1961.13.39.111 ↗
25. Neville · 1995
26. F. Benboudjema, Modélisation des déformations différées du béton sous sollicitations biaxiales. Application aux enceintes de confinement de bâtiments réacteurs des centrales nucléaires, PhD thesis of Université de Marne la Vallée (in French), 2002.
27. Factors influencing concrete strength
28. R. Le Roy, Déformations instantanées et différées des bétons à hautes performances PhD thesis of Ecole Nationale des Ponts et Chaussées, Rapport de recherche LPC n° OA22, Paris (in French), 1996.
29. Evaluation of long-term properties of concrete
30. Effect of mix-parameters on autogenous deformations of cement pastes—microstructural interpretations
31. Experimental characterisation of the drying effect on uniaxial mechanical behaviour of mortar10.1007/BF02481616 ↗
32. Triaxial mechanical behaviour of mortar: effects of drying10.1016/j.cemconres.2003.12.004 ↗
33. Modulus of elasticity of concrete in compression (CPC8)
34. Capillary continuity or discontinuity in cement pastes
35. La structuration progressive de la pierre de ciment