Micro- and meso-scale pore structure in mortar in relation to aggregate content
Source abstract
Abstract
Abstract Mortar is often viewed as a three-phase composite consisting of aggregate, bulk paste, and an interfacial transition zone (ITZ). However, this description is inconsistent with experimental findings because of the basic assumption that larger pores are only present within the ITZ. In this paper, we use backscattered electron (BSE) imaging to investigate the micro- and meso-scale structure of mortar with varying aggregate content. The results indicate that larger pores are present not only within the ITZ but also within areas far from aggregates. This phenomenon is discussed in detail based on a series of analytical calculations, such as the effective water binder ratio and the inter-aggregate spacing. We developed a modified computer model that includes a two-phase structure for bulk paste. This model interprets previous mercury intrusion porosimetry data very well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. The microchemistry and microstructure of Portland cement10.1146/annurev.ms.11.080181.001011 ↗
2. Mercury porosimetry of hardened cement pastes10.1016/S0008-8846(99)00083-6 ↗
3. Backscattered electron imaging of cementitious microstructures: understanding and quantification10.1016/j.cemconcomp.2004.02.029 ↗
4. Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes10.1016/j.cemconcomp.2006.09.003 ↗
5. The nano-mechanical signature of ultra high performance concrete by statistical nanoindentation techniques10.1016/j.cemconres.2008.09.002 ↗
6. Quantitative characterization of the transition zone in high strength concretes10.1680/adcr.1988.1.4.230 ↗
7. Interfacial transition zone in concrete10.1016/1065-7355(95)90037-3 ↗
8. The percolation of pore space in the cement paste/aggregate interfacial zone of concrete10.1016/0008-8846(95)00185-9 ↗
9. Considerations in image analysis as applied to investigations of the ITZ in concrete10.1016/S0958-9465(00)00085-8 ↗
10. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
11. Percolation and pore structure in mortars and concrete10.1016/0008-8846(94)90079-5 ↗
12. Modelling of the microstructure and transport properties of concrete10.1016/0950-0618(94)00019-0 ↗
13. Multiscale analytical/numerical theory of the diffusivity of concrete10.1016/S1065-7355(98)00010-8 ↗
14. The ITZ in concrete—a different view based on image analysis and SEM observations10.1016/S0958-9465(00)00065-2 ↗
15. Patch microstructure in cement-based materials: fact or artefact?10.1016/j.cemconres.2006.02.008 ↗
16. A discussion of paper “Patch microstructure in cement-based materials: Fact or artefact?” by H.S. Wong and N.R. Buenfeld10.1016/j.cemconres.2006.02.001 ↗
17. Reply to the discussion by Sidney Diamond of the paper “Patch microstructure in cement-based materials: Fact or artefact?”10.1016/j.cemconres.2006.02.005 ↗
18. Multi-scale microstructural modelling of concrete diffusivity: identification of significant variables
19. Effect of the interfacial transition zone on conductivity of Portland cement mortars10.1111/j.1151-2916.2000.tb01344.x ↗
20. Approximate migration coefficient of the interfacial transition zone and the effect of aggregate content on the migration coefficient of mortar10.1016/S0008-8846(02)00832-3 ↗
21. Influence of the aggregate on the electrical conductivity of Portland cement concretes10.1016/S0008-8846(03)00166-2 ↗
22. Percolation of ITZ in concrete and effects of attributing factors10.1061/(ASCE)0899-1561(2007)19:9(784) ↗
23. Assessing the influence of ITZ on the steady-state chloride diffusivity of concrete using a numerical model10.1016/j.cemconres.2009.06.002 ↗
24. Multi-scale prediction of the effective chloride diffusion coefficient of concrete10.1016/j.conbuildmat.2011.03.041 ↗
25. Determination of water–cement ratio in hardened concrete by optical fluorescence microscopy
26. Porosity characterization of ITZ in cementitious composites: concentric expansion and overflow criterion10.1016/j.conbuildmat.2012.09.047 ↗
27. Role of water film thickness in rheology of CSF mortar10.1016/j.cemconcomp.2010.01.005 ↗
28. Mortar design based on water film thickness10.1016/j.conbuildmat.2010.11.038 ↗
29. Pore segmentation of cement-based materials from backscattered electron images10.1016/j.cemconres.2005.10.006 ↗
30. van Breugel · 1991
31. Numerical simulation of hydration-driven moisture transport in bulk and interface paste in hardening concrete10.1016/S0008-8846(00)00336-7 ↗
32. Modelling of transport phenomena at cement matrix–aggregate interfaces10.1023/B:INTS.0000042340.29735.92 ↗
33. Zhou · 2010
34. Roth · 1970
35. Percolation of capillary pores in hardening cement pastes10.1016/j.cemconres.2004.07.033 ↗
36. Modelling of water permeability in cementitious materials10.1617/s11527-006-9138-4 ↗
37. Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
38. Water-entrained cement-based materials: I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
39. Water-entrained cement-based materials: II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
40. Modeling of water migration during internal curing with superabsorbent polymers10.1061/(ASCE)MT.1943-5533.0000448 ↗
41. Modeling the elastic properties of concrete composites: experiment, differential effective medium theory, and numerical simulation10.1016/j.cemconcomp.2006.07.020 ↗
42. An investigation into the influence of inter-aggregate spacing and the extent of the ITZ on properties of Portland cement concretes10.1016/j.cemconres.2010.07.002 ↗
43. Nearest-surface distribution function for polydispersed particle systems10.1103/PhysRevA.45.5530 ↗
44. Analytical formulas for interfacial transition zone properties10.1016/S1065-7355(97)90016-X ↗
45. Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone10.1016/S0008-8846(03)00205-9 ↗
46. Linear packing density model of grain mixtures10.1016/0032-5910(86)80058-4 ↗
47. Modifying the linear packing model for predicting the porosity of nonspherical particle mixtures10.1021/ie950616a ↗
48. Comparison of particle packing models for proportioning concrete constituents for minimum voids ratio
49. Packing density measurement and modelling of fine aggregate and mortar10.1016/j.cemconcomp.2009.03.006 ↗
50. The density of random close packing of spheres